Vollmer of America

The UltraTEC ultrasonic A25 creates a formation and dissolution/implosion of bubbles in water that release an intense energy during implosion. This is created by an ultra-high oscillation of 20kHz (20,000 oscillations per second) with an oscillation width of +/-80-120microns, which far exceeds the amplitude of ultrasonic cleaning, cutting and…

VGrind 260, VGrind Neon and VGrind Argon

VGrind 260, VGrind Neon and VGrind Argon – these are the names of the three new tool grinding machines from the sharpening specialist VOLLMER. They were presented for the first time at the GrindingHub 2022 trade fair in Stuttgart.

Sharpening Duo for Carbide-Tipped Circular Saws

The new duo of VOLLMER grinding machines designed for machining carbide-tipped circular saw blades, is made up of the CS 860 and CSF 860.

VLaser 270 Laser-Based Sharpening Machine

The German sharpening specialist Vollmer has completed its range of products with a laser-based sharpening machine. The machine concept for the VLaser 270 will be presented for the first time in spring 2020.

CHC & CHP Sharpening machine series

Intended for hook and clearance surfaces of carbide-tipped saw blades, the CHP 840 and 1300 universal sharpening machines with four CNC-controlled axes are suitable for the complete machining of all commonly found tooth geometries, according to Vollmer of America.

CHD270

Vollmer of America's CHD270 is a sharpening machine with 8 CNC-controlled axes and a measurement device, and it's intended for the automatic machining of carbide-tipped circular saw blades with various diameters and tooth geometries on face and top.

CM 200 and 300

The use of carbide- or cermet-tipped thin-kerf metal circular saws allows for high feed rates, low machining forces and thin saw kerfs—all of which reduces energy consumption and saves resources, according to Vollmer of America, which specializes in grinding and erosion machines, and develops sharpening machines such as the CM 200/300 and the CMF…

QXD 250

The Vollmer eroding machine QXD 250 makes it possible for tool manufacturers to process more than 30 percent more PCD cutters in the same amount of time as has been the case up to now. This milestone in production is made possible by the generator technology Vpulse EDM, which sets the eroding beat at the heart of the QXD 250.

Vgrind 360 Tool-Cutter

With greater scope in terms of its travel capabilities, the new Vgrind 360 is able to machine tools up to a diameter of 200mm, depending on the geometry. Just like its predecessor, the Vgrind 160, the same effective kinematics with two vertical spindles allow for multi-level machining.

Industry News

+ click to show 4 results

Saw manufacturer invests in Vollmer CNC technology

Wisconsin-based Integrity Saw & Tool Inc. purchased a Vollmer CHX 840 circular saw blade sharpening machine with the Vollmer HS automated loading station to increase capacity to meet the demand from a new pallet manufacturing customer.

Cutting tool manufacturer uses ultrasonic technology to remove burrs

Since May 2024, Intercable Tools GmbH, a more than 50-year-old manufacturer of connection technology and tools, has been using ultrasonic deburring technology from the German company UltraTEC innovation GmbH, part of the VOLLMER Group, to remove burrs from hydraulic units automatically and in a contact-free manner.

Sharpening tools overnight with Vollmer Automation

The global pandemic has impacted businesses around the world, but for Aiguisatek, a Canada-based sharpening service, the impact was compounded by stringent local regulation in the Quebec province that all but shut down manufacturing in the area. Automation technology solved these challenges.

The seven pillars of Vollmer sustainability

"A passion for perfection" – for decades, this quote has stood for reliability and quality from Vollmer. The company has delved deeper into this concept.

Articles

+ click to show 1 results

Spark success with EDM

Author:

William Leventon

Column:

Feature Article

Published:

May 4, 2023 - 13:30 pm

Videos

+ click to show 6 results

Vollmer IMTS 2024 Booth Visit

Arndt Hauger, innovation manager at Vollmer, introduces the VLaser 370 — a high-precision machine crafted for PCD tool production with a focus on the automotive and aerospace sectors. The VLaser utilizes a unique kinematic design that enables fast and efficient laser machining of complex profiles. It offers exceptional dimensional accuracy and is…

CTE Booth Visit with Vollmer of America @ Eastec

George Brown, Northeast and Southeast regional manager for Vollmer of America Corp., took a few minutes during Eastec 2023 to discuss some of the features of the company's new VGrind argon machine.

IMTS 2022 Booth Visit with Vollmer of America

Christopher Lang, project engineer for Vollmer of America, provides an overview and brief demonstration of the company’s new VLaser 370 machine.

Grinding Meets Erosion!

Two technologies, one machine: The new VOLLMER VHybrid 360 combines the strengths of an innovative grinding machine and a proven powerful erosion machine. Allowing you to switch between the two functions in no time! Efficient processing and powerful machining of carbide tools with diameters of up to 50 mm.

Vollmer VHybrid 360 for grinding & eroding

Do you want to grind carbide tools and erode PCD tools with high productivity? The new VHybrid 360 from Vollmer of America Corp. combines the strengths of an innovative grinding machine and a proven, powerful erosion machine.

Manufacturing and machining rotary tools with VOLLMER: efficient and precise!

The VGrind 360, VOLLMER’s latest tool grinding machine, is equipped with enhanced travel distances in order to machine carbide tools up to a diameter of 100 millimeters.

People & Companies

+ click to show 6 results