Sandvik Coromant introduces CoroMill 357, a new tough multi-edge face milling cutter for roughing and cubing in steel and cast iron with high insert security. In typical applications, such as rough face milling, cubing, intermittent component figurations, components with uneven stock or forgings, welding and castings, applying CoroMill 357 achieves a high metal removal rate and superior productivity.
The CoroMill 357 multi-edge design presents a cost efficient solution because the double sided, thick pentagonal inserts housed in shim-protected tip seats provides superior production economy and reliable performance. The mill's secure, strong cutter body features an innovative insert clamping system that offers quick and easy insert indexing to save time. Large support-faces radially, axially and on the base prevent deformation and ensure consistent performance.
Suitable for ISO 50 and larger machines, CoroMill 357 takes a depth of cut up to 10mm (0.394") with a feed per tooth up to 0.7mm/z (0.0276"/z). CoroMill 357 is available in diameter sizes 100-315mm (4-10").
Distance between the bottom of the cut and the uncut surface of the workpiece, measured in a direction at right angles to the machined surface of the workpiece.
Machining operation in which metal or other material is removed by applying power to a rotating cutter. In vertical milling, the cutting tool is mounted vertically on the spindle. In horizontal milling, the cutting tool is mounted horizontally, either directly on the spindle or on an arbor. Horizontal milling is further broken down into conventional milling, where the cutter rotates opposite the direction of feed, or “up” into the workpiece; and climb milling, where the cutter rotates in the direction of feed, or “down” into the workpiece. Milling operations include plane or surface milling, endmilling, facemilling, angle milling, form milling and profiling.
Loosely, any milling tool. Horizontal cutters take the form of plain milling cutters, plain spiral-tooth cutters, helical cutters, side-milling cutters, staggered-tooth side-milling cutters, facemilling cutters, angular cutters, double-angle cutters, convex and concave form-milling cutters, straddle-sprocket cutters, spur-gear cutters, corner-rounding cutters and slitting saws. Vertical cutters use shank-mounted cutting tools, including endmills, T-slot cutters, Woodruff keyseat cutters and dovetail cutters; these may also be used on horizontal mills. See milling.
Cutting tool and tooling systems specialist Sandvik Coromant is launching GC4330 and GC4340, two new insert grades for steel milling. With the development of advanced production technologies, such as a new substrate, Inveio coating and an improved post-treatment technology, the new grades provide…
Sandvik Coromant is releasing two series of ceramic endmills for optimized performance in nickel-based alloys. The latest brazed ceramic CoroMill 316 and ceramic CoroMill Plura endmills offer a more productive method for roughing in ISO S materials compared to standard carbide milling cutters.
Sandvik Coromant is releasing three new grades for its popular CoroDrill 870 exchangeable-tip drill. GC4344, GC3334 and GC2334 have been developed to offer significant tool life improvements and more predictable wear patterns, all while maintaining the high penetration rates and productivity for…
Sandvik Coromant is set to release two new grades for interrupted hard-part turning operations: CB7125 and CB7135. Available in October 2018, the grades will complete the company’s offer for hard-part turning, complementing the existing CB7105 and CB7115 grades.
Using digital solutions for monitoring of equipment utilization makes workshops far more efficient and profitable than would otherwise have been possible, which is why Sandvik Coromant has introduced CoroPlus MachiningInsights. MachiningInsights is more than a monitoring system. This solution…
Sandvik Coromant, is introducing two new ceramic insert grades that are capable of performing high-speed, high-security turning operations on components made from demanding HRSA (heat-resistant superalloy) materials. The CC6220 and CC6230 ceramic grades are developed to machine demanding materials…
Sandvik Coromant has introduced a high-precision hydraulic chuck for turning operations that offers enhanced pull-out security. CoroChuck 935 has been designed to deliver fast, rigid and secure clamping, time after time.
Sandvik Coromant has launched a new thread forming tap optimized for ISO P steel machining, which is designed to boost productivity, particularly in the automotive industry. The CoroTap 400 offers chip-free tapping, as well as faster machining times and stronger threads through reduced torque and…
Following last year’s launch of PrimeTurning methodology and tools for external turning operations, Sandvik Coromant is introducing a dedicated CoroTurn Prime SL head that makes this process available for internal turning operations. The new SL head will meet the needs of oil and gas, aerospace and…
The CoroThread 266 thread turning tool from Sandvik Coromant is available with precision over- and under-coolant to improve process security and maximize efficiency. The addition of over-coolant improves chip formation for more secure machining, while under-coolant controls temperature for long and…
PRODUCTS
