CUT 200 Wire EDM

June 01, 2011

GF AgieCharmilles says its CUT 200 Wire EDM provides faster spark-to-spark wire threading, increases energy efficiency and boosts productivity when cutting parts of variable heights. The machine also offers higher flexibility through its ability to reliably hold tolerances measured inµm over a wide range of part sizes.

The CUT 200 integrates GF AgieCharmilles' Power Expert smart module, which continuously calculates part thickness, checking flushing pressure and adjusting machine power accordingly. This prevents wire breakage when changing the part thickness being machined. The machine also offers an optional Renishaw touch probe that allows users to inspect finished parts while still on the worktable in the machine, eliminating the need for part inspection with a CMM.

The CUT 200 accommodates wire diameters ranging from 0.07mm to 0.33mm and can handle part tapers of up to 45 degrees, regardless of part thickness. The machine's digital CC generator enables surface finishes as fine as Ra 0.1µm and an optional power module can boost cutting speed to 37.2 in2/hr. Additionally, the Econowatt 2 smart module provides energy savings by allowing operators to define conditions in which the machine will automatically shut down or awaken to complete thermal stabilization prior to production.

Related Glossary Terms

  • cutting speed

    cutting speed

    Tangential velocity on the surface of the tool or workpiece at the cutting interface. The formula for cutting speed (sfm) is tool diameter 5 0.26 5 spindle speed (rpm). The formula for feed per tooth (fpt) is table feed (ipm)/number of flutes/spindle speed (rpm). The formula for spindle speed (rpm) is cutting speed (sfm) 5 3.82/tool diameter. The formula for table feed (ipm) is feed per tooth (ftp) 5 number of tool flutes 5 spindle speed (rpm).

  • electrical-discharge machining ( EDM)

    electrical-discharge machining ( EDM)

    Process that vaporizes conductive materials by controlled application of pulsed electrical current that flows between a workpiece and electrode (tool) in a dielectric fluid. Permits machining shapes to tight accuracies without the internal stresses conventional machining often generates. Useful in diemaking.

  • threading

    threading

    Process of both external (e.g., thread milling) and internal (e.g., tapping, thread milling) cutting, turning and rolling of threads into particular material. Standardized specifications are available to determine the desired results of the threading process. Numerous thread-series designations are written for specific applications. Threading often is performed on a lathe. Specifications such as thread height are critical in determining the strength of the threads. The material used is taken into consideration in determining the expected results of any particular application for that threaded piece. In external threading, a calculated depth is required as well as a particular angle to the cut. To perform internal threading, the exact diameter to bore the hole is critical before threading. The threads are distinguished from one another by the amount of tolerance and/or allowance that is specified. See turning.

  • wire EDM

    wire EDM

    Process similar to ram electrical-discharge machining except a small-diameter copper or brass wire is used as a traveling electrode. Usually used in conjunction with a CNC and only works when a part is to be cut completely through. A common analogy is wire electrical-discharge machining is like an ultraprecise, electrical, contour-sawing operation.

Additional Products from GF Machining Solutions

The GF Machining Solutions Microlution ML-10 is a femtosecond solution for industries ranging from automotive to medical. As an economical and highly capable micron-scale machining system, the ML-10 performs microscale holemaking and fine cutting without the creation of heat affected zones (HAZ).…

GF Machining Solutions offers the Microlution MLDS, the next generation in femtosecond laser processing systems. The dual-station/dual-part laser machining center provides extremely high laser “on time” via measurement and
loading functions performed as parallel processes alongside machining…

GF Machining Solutions announces the availability of its AgieCharmilles CUT C 350 and CUT C 600 wire EDMs for U.S. manufacturers that want high performance with low operating costs. At a $99,000 starting price point, the machines are not only cost-effective, but also provide optimized cutting…

Shops that need a highly efficient digital solution to surface texturing for product design and moldmaking will gain new levels of design quality and productivity with the new AgieCharmilles LASER S series from GF Machining Solutions. This all-in-one texturing solution applies designs to…

With their powerful and dynamic material removal capabilities and high stiffness, the Mikron MILL P 500 U (pictured) and MILL P 800 U enable continuous machining of complex shapes and tough materials while shortening process time. Their advanced thermal stability ensures reliable precision over…

The information and communications technology (ICT) and automotive sectors requiring graphite molds for glass end products and graphite electrodes present distinct challenges in terms of surface finish, precision, process reliability and productivity. GF Machining Solutions’ high-speed Mikron MILL…

To meet the demanding mold and die machining needs of high-tech industries, GF Machining Solutions has unveiled the new Mikron HSM 500 Graphite high-speed mill. The system combines the features of a dedicated graphite machine with the flexibility of the company’s HSM 500 high-speed milling platform…

GF Machining Solutions says its new FORM P 350 die sinking EDM features precision-enhancing design qualities along with several integrated technologies to enable shops to easily enhance productivity and profitability.

GF Machining Solutions’ new compact FORM E 350 machine is a suitable die sinking EDM solution for small shops. Even with a small footprint, the machine still boasts several design and performance features that enhance a shop’s competitive advantage.

GF Machining Solutions says its new AgieCharmilles CUT P Series of wire EDMs provides users precise positioning and contouring capabilities for enhanced part quality and productivity. The CUT P 350/550/800/1250 machines feature efficient power generators, robust designs and intuitive human-machine…

PRODUCTS

11/20/2024
Jorgensen Conveyor and Filtration Solutions, Mequon, Wisconsin, highlighted its distinctive…

10/23/2024
The Starrett AVR400 offers full CNC capabilities including X-Y-Z positioning and comprehensive zoom…

10/23/2024
TIN Coated Thread Gages have high dimensionally stable HSS construction with TIN coating that…