BIG Kaiser Precision Tooling Inc. introduces a budget-friendly benchtop tool presetter equipped with a 5.7-inch color LCD touch screen and camera. As an upgraded model of the popular DIASET, manufactured by Innotool (Austria), this vision-based camera version enables one-touch angle, radius, diameter and length measurements. An optional incident light allows for inspection of cutting edges for built-up edge, flank wear or fractures.
The DIASET is built with a stable measuring column and base made out of mineral cast. This strong foundation ensures extreme rigidity and excellent temperature resistance for high repeatability and positioning accuracy of .0001". These impressive capabilities on an entry-level presetter are also supported by horizontal and vertical slides that smoothly move along hardened and precision ground guideways, both with pneumatic locking mechanisms and foot pedal control.
The high-precision rotating spindle allows a guaranteed accuracy of runout measurements to less than .0008" T.I.R. and is available with either integral ISO50 or ISO40 taper spindles. Reduction adapters are available for other common interfaces (ISO, HSK, KM, Polygon). Many combinations of max diameter/max length are available to perfectly suit your measuring needs and budget.
Additionally, two built-in USB ports for simultaneous external data saving and label printer connection, as well as internal storage of up to 99 reference points, means investing in the DIASET Camera Type will dramatically reduce the chance of human error in tool preparation.
1. Permanently damaging a metal by heating to cause either incipient melting or intergranular oxidation. 2. In grinding, getting the workpiece hot enough to cause discoloration or to change the microstructure by tempering or hardening.
As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that’s then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC’s offset table.
Chamfering the entry and exit of 0.80mm to 6.00mm holes can be a tedious, time-consuming process. The Noventa from Sphinx can transform this process using an innovative geometry that improves cycle time, tool life and surface quality.
The Nirox geometry has a degressive helix angle equal to 30 degrees at the point and is designed for accurate and precise hole location up to 9xD. A modern, TiAlSiN based coating allows for enhanced chip and coolant evacuation in difficult to machine and adhesive materials, such as titanium,…
Due to the small sizes of these boring heads, the digital display will no longer be present on the head itself, rather the adjustment value will be shown on a separate mobile device or tablet that has the BIG KAISER App installed. Once connected to the head, the App also can be used to set the…
The EWA68 boring head has a travel range of .866” on diameter, and with the smallest insert holder, it covers the range of Ø2.677-3.543”. This means that similar-sized bores on the same part could be produced with a single boring head. With the addition of two larger insert holders, the range can…
The HDC jet-through type holders are ideal for high-precision 5-axis machining with maximum RPM of 35,000 and clamping range of ¼” to ½” and fit nearly any application in the automotive, aerospace, medical, and die and mold industries.
The exclusive FLM 3D chip-breaker design is used on PCD-tipped inserts ideal for finishing of aluminum components, where traditional flat-top inserts may produce a large continuous nest of chips that is difficult to remove from the bore and/or tool, even with high-pressure coolant. Three different…
BIG KAISER Precision Tooling is adding more than 30 pressed-geometry carbide inserts for its tools. The new insert design is the result of extensive research and testing.
In order to offer more flexibility to customers, BIG KAISER has moved production of its CAT50 milling adapters to the U.S. The product performance and design will not change, but the move allows for more variation and faster delivery of special lengths for specific applications.
PRODUCTS
