Building on the success of the Phoenix high performance drill from Sphinx, BIG Kaiser has introduced the new Power-Phoenix extra long high performance drill series. The drills are designed for optimal performance in deep hole applications in steel, stainless steel, cast iron, aluminum and titanium.
Power-Phoenix drills feature a 137-degree point angle and four-margin geometry (above a 2.0mm diameter) for stability, ensuring a straight hole even in deep drilling applications. A unique point grind ensures consistent chip formation, while specially designed polished flutes allow for rapid chip evacuation. Through-coolant capability is standard, and the Power-Phoenix was designed to perform with even low coolant pressure down to 290 PSI (20 bar).
"These features, plus a state-of-the-art, wear resistant Helica coating, make the Power-Phoenix the ideal high performance drill of deep hole applications," says Mike Bojanowski, BIG Kaiser assistant product manager for the Sphinx drill line.
The diameter range available is 1.0mm-12.7mm for the 16xD version, and 2.0mm-10.0mm for the rest of the drill series: 20xD, 25xD, 30xD.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
BIG KAISER is expanding its range of BIG Capto toolholders with the addition of a new size, C4, which is becoming increasingly popular as a quick-change system for turret tooling on lathes.
BIG KAISER says its hydraulic chucks for Swiss-type lathes are the first improvement to this technology in more than 30 years. These toolholders use a single wrench, which makes for a quick and easy change of the cutting tools on a gang slide.
BIG KAISER introduces two versions of the C-Centering Cutter, a multifunction cutter capable of spot drilling, centering and chamfering. The C-Centering Cutter is an indexable cutter that uses a specialized insert that can start a hole from a solid piece, something extremely difficult to do. It can…
BIG KAISER presents the Torque Fit, a tightening fixture for collet chucks with an integrated torque measuring system. This device makes it easy to ensure that a collet chuck is correctly tightened.
BIG KAISER Precision Tooling Inc. has added the Dyna Contact to its product offering. The ceramic taper gage allows inspection of machine spindle tapers at a glance.
BIG KAISER announced its new Level Master Wireless, a high-precision device for the leveling of machine tool tables. The Level Master Wireless adds wireless connectivity to enable leveling information to be read from a separate display device, making it easier to ensure that a precision level is…
BIG KAISER’s UNIFLEX system is a 3D zero-point clamping system designed to allow parts with curved surfaces to be held rigidly for various operations and be adjusted to different height requirements. The UNIFLEX system is available in two diameters: 25.4mm and 50mm.
The precision and ruggedness of BIG KAISER boring heads deliver measurable performance advantages, significantly reducing finishing cost and cycle time. This is proven through the development of the EWE digital boring head.
BIG KAISER announces its HDC Straight Shank holder to the market, used for increased versatility. The slim design provides superior balance, concentricity and is suitable for reaching into confined areas.
BIG KAISER introduces the Base Master Red, a high-precision touch sensor that rapidly determines workpiece offsets and tool lengths, and the Base Master Mini, a thin, compact tool offset sensor.
PRODUCTS
