Building on the success of the Phoenix high performance drill from Sphinx, BIG Kaiser has introduced the new Power-Phoenix extra long high performance drill series. The drills are designed for optimal performance in deep hole applications in steel, stainless steel, cast iron, aluminum and titanium.
Power-Phoenix drills feature a 137-degree point angle and four-margin geometry (above a 2.0mm diameter) for stability, ensuring a straight hole even in deep drilling applications. A unique point grind ensures consistent chip formation, while specially designed polished flutes allow for rapid chip evacuation. Through-coolant capability is standard, and the Power-Phoenix was designed to perform with even low coolant pressure down to 290 PSI (20 bar).
"These features, plus a state-of-the-art, wear resistant Helica coating, make the Power-Phoenix the ideal high performance drill of deep hole applications," says Mike Bojanowski, BIG Kaiser assistant product manager for the Sphinx drill line.
The diameter range available is 1.0mm-12.7mm for the 16xD version, and 2.0mm-10.0mm for the rest of the drill series: 20xD, 25xD, 30xD.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that’s then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC’s offset table.
Chamfering the entry and exit of 0.80mm to 6.00mm holes can be a tedious, time-consuming process. The Noventa from Sphinx can transform this process using an innovative geometry that improves cycle time, tool life and surface quality.
The Nirox geometry has a degressive helix angle equal to 30 degrees at the point and is designed for accurate and precise hole location up to 9xD. A modern, TiAlSiN based coating allows for enhanced chip and coolant evacuation in difficult to machine and adhesive materials, such as titanium,…
Due to the small sizes of these boring heads, the digital display will no longer be present on the head itself, rather the adjustment value will be shown on a separate mobile device or tablet that has the BIG KAISER App installed. Once connected to the head, the App also can be used to set the…
The EWA68 boring head has a travel range of .866” on diameter, and with the smallest insert holder, it covers the range of Ø2.677-3.543”. This means that similar-sized bores on the same part could be produced with a single boring head. With the addition of two larger insert holders, the range can…
The HDC jet-through type holders are ideal for high-precision 5-axis machining with maximum RPM of 35,000 and clamping range of ¼” to ½” and fit nearly any application in the automotive, aerospace, medical, and die and mold industries.
The exclusive FLM 3D chip-breaker design is used on PCD-tipped inserts ideal for finishing of aluminum components, where traditional flat-top inserts may produce a large continuous nest of chips that is difficult to remove from the bore and/or tool, even with high-pressure coolant. Three different…
BIG KAISER Precision Tooling is adding more than 30 pressed-geometry carbide inserts for its tools. The new insert design is the result of extensive research and testing.
In order to offer more flexibility to customers, BIG KAISER has moved production of its CAT50 milling adapters to the U.S. The product performance and design will not change, but the move allows for more variation and faster delivery of special lengths for specific applications.
PRODUCTS
