Walter has introduced the Walter Titex DB133 Supreme, a solid-carbide microdrill that reportedly delivers tight tolerances, high-quality surface finishes, superior process reliability and longer tool life. The difference for the DB133 Supreme begins with the use of grades WJ30EL and WJ30ER, developed by Walter specifically for microdrills. These grades provide the drills with superior wear resistance.
ln addition, Walter’s new cutting edge geometry increases the process reliability of these new drills, and optimized dimensions allow for maximum stability, even with the smallest drills. The exceptionally uniform finish on the drill cutting edge and tight tolerances ensures excellent workpiece surface finishes. With the Walter Titex DB133 Supreme special geometry, chip removal is effective, even without through coolant. This allows holes of upto 8 diameters deep to be easily achieved.
The new solid-carbide microdrills, with their 140° point geometry, can be used universally on many different materials in ISO material groups P, K and N. Diameters range from 0.02 to 0.12 in. (0.5 to 2.95 mm). This new drill design is ideal for users in general machining, mold and die making, the energy and automotive industries and any other areas where small diameter, deep holes, are required.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.
Available in diameters from 1/8" to 1", the MA267/MA263 Advance tools are excellent for machining all other ISO N materials, such as copper, brass, bronze and magnesium-based alloys, in addition to aluminum. With a cylindrical shank, these tools are available with or without chip-…
When compared to competing drills, the DC180 Supreme has a tool life that is about 50% longer. An additional benefit for the DC180 drill is universal application at the highest cutting speeds. The drill is suitable for high production volume applications with a large number of holes, such as in the…
The lineup of products consists of three categories of tools. Supreme tools indicate the highest level of technology and performance available. Advance tools indicate products efficiently balanced between price and performance and Perform tools are products that provide an economical solution with…
The inserts feature three cutting edges at a 50° copying angle. Compared to the WL25 indexable inserts, which measure 25 mm per side, the WL17 inserts measure 17 mm per side. The WL25 inserts are now additionally offered in W0110-C Walter Capto tools and the W1211 QuadFit exchangeable head for…
The MA230 Advance solid carbide milling cutting is for universal machining of steel, stainless steel, cast iron and high-temperature superalloys (ISO P, M, K and S workpiece groups) at the highest level. The MA230 Advance cutter is for high-performance roughing and finishing and enables reliable…
The primary applications for the DC183 Supreme solid carbide drill are machining steel, cast iron and non-ferrous materials (ISO P, K and N). The secondary applications are super alloys and stainless-steel materials (ISO S and M). The main targeted areas of use are automotive, aviation and energy…
The WKK25G grade is a true specialist when milling today’s cast irons (ISO K material group), such as ductile cast iron. Specifically, the grade is ideal for unfavorable milling conditions, such as interrupted cuts, and for wet machining applications. The grade meets the most stringent requirements…
Ideal for holemaking without a pilot drill up to 10×Dc, the inserts provide time savings that boost productivity. The inserts were designed to achieve maximum tool life in stable machining conditions thanks to the wear resistant WPP25 grade with HIPIMS technology. The grade has a particularly hard…
The new grade is Walter’s response to the upwards trend towards milling steel with difficult machining properties and wear-resistant stainless steel, such as found in applications in the energy and aviation industries. WSM35G meets the most stringent requirement for process reliability, which is…
The curved wiper cutting edge is a unique feature that makes the wiper action universal across various material groups such as steels, stainless steels, cast irons or even super alloys. The wiper action can be used to reduce machining time by using double the feed rate, while imparting the same…
PRODUCTS
