BIG KAISER presents the Torque Fit, a tightening fixture for collet chucks with an integrated torque measuring system. This device makes it easy to ensure that a collet chuck is correctly tightened.
Proper tightening is an important first step of high-precision cutting. BIG KAISER's Torque Fit notifies the user of a correctly set torque value via an audible buzzer. If overtightening occurs, the error LED light will flash.
The Torque Fit was developed to replace multiple torque wrenches and has adapters available for all common machine tool interfaces such as CAT, BT, SK, HSK and BIG CAPTO, making it an economical investment. For maximum convenience, torque values for all BIG KAISER-made collet chucks are preset. The operator can, however, use a generic setting to tighten any collet chuck with a torque value up to 80 Nm (60 ft-lbs.).
Workholding device that affixes to a mill, lathe or drill-press spindle. It holds a tool or workpiece by one end, allowing it to be rotated. May also be fitted to the machine table to hold a workpiece. Two or more adjustable jaws actually hold the tool or part. May be actuated manually, pneumatically, hydraulically or electrically. See collet.
Flexible-sided device that secures a tool or workpiece. Similar in function to a chuck, but can accommodate only a narrow size range. Typically provides greater gripping force and precision than a chuck. See chuck.
Thin web or film of metal on a casting that occurs at die partings and around air vents and movable cores. This excess metal is due to necessary working and operating clearances in a die. Flash also is the excess material squeezed out of the cavity as a compression mold closes or as pressure is applied to the cavity.
As opposed to measuring, printing a label and punching the data into the control, SPI prints a tool label with a QR code at the presetter that’s then read by the SPI module at the machine control. The system can also be configured to send measurements directly into the tool NC’s offset table.
The Nirox geometry has a degressive helix angle equal to 30 degrees at the point and is designed for accurate and precise hole location up to 9xD. A modern, TiAlSiN based coating allows for enhanced chip and coolant evacuation in difficult to machine and adhesive materials, such as titanium,…
Due to the small sizes of these boring heads, the digital display will no longer be present on the head itself, rather the adjustment value will be shown on a separate mobile device or tablet that has the BIG KAISER App installed. Once connected to the head, the App also can be used to set the…
The EWA68 boring head has a travel range of .866” on diameter, and with the smallest insert holder, it covers the range of Ø2.677-3.543”. This means that similar-sized bores on the same part could be produced with a single boring head. With the addition of two larger insert holders, the range can…
Chamfering the entry and exit of 0.80mm to 6.00mm holes can be a tedious, time-consuming process. The Noventa from Sphinx can transform this process using an innovative geometry that improves cycle time, tool life and surface quality.
The HDC jet-through type holders are ideal for high-precision 5-axis machining with maximum RPM of 35,000 and clamping range of ¼” to ½” and fit nearly any application in the automotive, aerospace, medical, and die and mold industries.
The exclusive FLM 3D chip-breaker design is used on PCD-tipped inserts ideal for finishing of aluminum components, where traditional flat-top inserts may produce a large continuous nest of chips that is difficult to remove from the bore and/or tool, even with high-pressure coolant. Three different…
BIG KAISER Precision Tooling is adding more than 30 pressed-geometry carbide inserts for its tools. The new insert design is the result of extensive research and testing.
In order to offer more flexibility to customers, BIG KAISER has moved production of its CAT50 milling adapters to the U.S. The product performance and design will not change, but the move allows for more variation and faster delivery of special lengths for specific applications.
BIG KAISER has two powerful accessories crafted to improve in-process efficiency: ChipFans and T-slot covers. When used together with a machine that delivers on speed and accuracy, these accessories help machines reach maximum levels of productivity—even during downtime.
PRODUCTS
