Tungaloy Corp. announces the expansion of newly designed drill bodies and new insert grades for TungdrillTwisted. The series has been well-recognized in the market for its excellent cutting performance since its release, according to the company.
The drill bodies deliver even more stability and efficiency in holemaking with high rigidity to withstand the deflection and the optimized balance in insert positions. AH9030 and AH6030 are Tungaloy's newest insert grades for holemaking where wear resistance and anti-oxidation are required. These grades, combined with the stability of the drill body, will deliver long tool life.
This expansion strengthens the TungdrillTwisted series helping customers increase their productivity and reduce machining cost.
Main features:
• Highly rigid drill body increases stability in machining.
• New grades with high wear resistance provide long tool life.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.
Additional Products from Tungaloy-NTK America, Inc.
Tungaloy continuously expands the advantages of its AddMeisterDrill exchangeable-head drill solution into a smaller diameter range. Ten new DMC precision drill heads have been added to the line for diameters ranging from 4.0 mm (.157″) to 4.9 mm (.192″), expanding the entire range from 4.0 mm (.157…
Tungaloy has expanded its AddInternalCut groove turning tool series to include new TCIG12 inserts as well as additional TCIG10 inserts that allow a maximum groove width of 3.0 millimeters (.118 inches) in bores as small as 10.5 millimeter (.413 inch) diameter.
DoTriple-Mill and DoQuad-Mill face milling cutters now offer AH3225 grade inserts with Tungaloy’s latest coating technology. The nano-multilayer structure, strong coating-substrate adherence, and super-hard coating surface, engineered, the coating provide the grade with superior wear and fracture…
Turning threads on hardened parts can be a challenge when using coated cemented carbide inserts: the cutting edge rapidly wears out before finishing the entire thread profiles, inhibiting greater feed rates and D.O.Cs. to be applied for increased productivity. Of all Tungaloy CBN grades, BX330…
AddForceBarrel uses inserts whose cutting edges have a large-radius arc of either 20 mm (.787″) or 30 mm (1.181″), designed for semi-finish profiling of 3D surfaces. Just like the TungMeister’s barrel milling heads, AddForceBarrel provides much greater engagement area between the cutting edge and…
The coarse pitch cutters retain a prominent feature of TungForce-Rec that provides maximum tool rigidity during demanding operations. In addition, flutes on the cutter body are designed with large chip space to promote smooth evacuation, preventing chips from clogging during operations.
348 inserts added to stainless steel turning grade series of AH6225, AH6235, and T6215. AH6225 is a first-choice grade designed to provide excellent machining performance in general stainless steel turning operations, extending from continuous to light interrupted cuts. AH6235 is another PVD-coated…
The DMH drill head geometry is designed to protect drill corners and provide effective chip evacuation, making the drill head suited for applications that involve drilling holes through thin plates. The increased cutting edge strength resists thin-plate snapback and wear from exit burrs, preventing…
NS chipbreaker features a three-dimensional chipbreaker that is directly engraved on the PCD tip using the latest technology. This allows the generation of short chips during the machining of gummy metals such as aluminum and copper alloys, significantly reducing machine downtime due to chip…
TungCut CBN-tipped STH inserts provide the solution to these challenges with a completely new turning concept. In the shape of TungCut grooving insert, the new STH inserts perform finish-turning by feeding the insert sideways on the worked surface. Its CBN cutting edge features a unique wiper…
PRODUCTS
