Tungaloy is introducing TZ120 grade ceramic inserts designed for turning cast iron at high cutting speeds.
TZ120 ceramic grade is developed for efficient machining of cast iron. A zirconia-toughened aluminum-oxide grade with superior thermal properties, TZ120 enables extended tool life and process security at high cutting speeds, making the grade ideal for high-speed, dry machining of centrifugally cast cylinder liners. The new grade will allow Tungaloy’s extensive lineup of ceramic insert grades to provide a variety of cast iron turning solutions at high speeds.
Key properties:
Tough ceramic grade with chemical and thermal stability provides excellent resistance to strong acids at elevated temperatures
The uniform distribution of the zirconia grains in the alumina matrix imparts superior fracture and notch wear resistance, preventing premature insert failure during demanding operations
Ideal for machining of centrifugally cast iron cylinder liners
Designed for dry machining only — the use of cutting fluids is detrimental to insert life
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.
Additional Products from Tungaloy-NTK America, Inc.
DrillForce-Meister uses exchangeable drill tips designed to efficiently open large diameter holes ranging from 20.0 mm to 40.0 mm (.787″ – 1.575″) at a lower cost. With the drill tips being exchangeable, DrillForce-Meister not only eliminates the need for regrinding and recoating, as is the case…
TungMeister is designed to reduce a significant amount of tool changeover time through the ability to replace used heads instead of an entire tool. Since it takes no more than one minute for tool exchange, setup time can significantly be reduced to as short as one tenth of the time it would…
DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip…
MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of…
DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle tool setup time can significantly be reduced, eliminating presetting, offset, and touch off of the…
This expansion includes two new TCL18 inserts with 1.75 mm and 2.5 mm thicknesses, expanding the existing line of 1.5 mm, 2.0 mm, and 3.0 mm inserts. The inserts are available in grade AH7025, a nano-multilayer PVD coating with high-aluminum content that provides hardness and adhesion to the grade…
TungForce-Feed features a large rake angle and positive inclination angle on the cutting edge that provide excellent chip control while reducing spindle loads and energy consumption. This allows a higher feed rate or greater depth of cut to be applied for improved efficiency and, by working in…
FH3125 is a new grade specifically developed to enhance the guide pad’s wear resistance in machining various materials. The dedicated carbide substrate of the grade is designed to reduce guide pad breakage, providing long and predictable tool life in deep hole processes. The corners of both ends of…
Setting the tool to the correct center height is one of the important factors to achieve the right dimension tolerances and surface integrity of the component. The new setting device enables easy, systematic, and accurate settings of tool center height. Its serrated interface with a magnetic…
The latest additions include inserts with 0.8 mm (.032″) nose radius in versatile AH725 grade. 0.8 mm nose radius will provide the cutting edge with strength, preventing edge fracture for predictable tool life. In addition, AH725 enhances the insert’s wear resistance during machining of various…
PRODUCTS
