Tungaloy is introducing TZ120 grade ceramic inserts designed for turning cast iron at high cutting speeds.
TZ120 ceramic grade is developed for efficient machining of cast iron. A zirconia-toughened aluminum-oxide grade with superior thermal properties, TZ120 enables extended tool life and process security at high cutting speeds, making the grade ideal for high-speed, dry machining of centrifugally cast cylinder liners. The new grade will allow Tungaloy’s extensive lineup of ceramic insert grades to provide a variety of cast iron turning solutions at high speeds.
Key properties:
Tough ceramic grade with chemical and thermal stability provides excellent resistance to strong acids at elevated temperatures
The uniform distribution of the zirconia grains in the alumina matrix imparts superior fracture and notch wear resistance, preventing premature insert failure during demanding operations
Ideal for machining of centrifugally cast iron cylinder liners
Designed for dry machining only — the use of cutting fluids is detrimental to insert life
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
Ability of the tool to withstand stresses that cause it to wear during cutting; an attribute linked to alloy composition, base material, thermal conditions, type of tooling and operation and other variables.
Additional Products from Tungaloy-NTK America, Inc.
Tungaloy continuously expands the advantages of its AddMeisterDrill exchangeable-head drill solution into a smaller diameter range. Ten new DMC precision drill heads have been added to the line for diameters ranging from 4.0 mm (.157″) to 4.9 mm (.192″), expanding the entire range from 4.0 mm (.157…
Tungaloy has expanded its AddInternalCut groove turning tool series to include new TCIG12 inserts as well as additional TCIG10 inserts that allow a maximum groove width of 3.0 millimeters (.118 inches) in bores as small as 10.5 millimeter (.413 inch) diameter.
DoTriple-Mill and DoQuad-Mill face milling cutters now offer AH3225 grade inserts with Tungaloy’s latest coating technology. The nano-multilayer structure, strong coating-substrate adherence, and super-hard coating surface, engineered, the coating provide the grade with superior wear and fracture…
Turning threads on hardened parts can be a challenge when using coated cemented carbide inserts: the cutting edge rapidly wears out before finishing the entire thread profiles, inhibiting greater feed rates and D.O.Cs. to be applied for increased productivity. Of all Tungaloy CBN grades, BX330…
AddForceBarrel uses inserts whose cutting edges have a large-radius arc of either 20 mm (.787″) or 30 mm (1.181″), designed for semi-finish profiling of 3D surfaces. Just like the TungMeister’s barrel milling heads, AddForceBarrel provides much greater engagement area between the cutting edge and…
The coarse pitch cutters retain a prominent feature of TungForce-Rec that provides maximum tool rigidity during demanding operations. In addition, flutes on the cutter body are designed with large chip space to promote smooth evacuation, preventing chips from clogging during operations.
348 inserts added to stainless steel turning grade series of AH6225, AH6235, and T6215. AH6225 is a first-choice grade designed to provide excellent machining performance in general stainless steel turning operations, extending from continuous to light interrupted cuts. AH6235 is another PVD-coated…
The DMH drill head geometry is designed to protect drill corners and provide effective chip evacuation, making the drill head suited for applications that involve drilling holes through thin plates. The increased cutting edge strength resists thin-plate snapback and wear from exit burrs, preventing…
NS chipbreaker features a three-dimensional chipbreaker that is directly engraved on the PCD tip using the latest technology. This allows the generation of short chips during the machining of gummy metals such as aluminum and copper alloys, significantly reducing machine downtime due to chip…
TungCut CBN-tipped STH inserts provide the solution to these challenges with a completely new turning concept. In the shape of TungCut grooving insert, the new STH inserts perform finish-turning by feeding the insert sideways on the worked surface. Its CBN cutting edge features a unique wiper…
PRODUCTS
