Articles & Columns

This article discusses the reasons students are not choosing to become machinists, and it reviews some of the measures being taken to recruit and train workers for tomorrow’s shops. The programs reviewed are designed to encourage an interest in manufacturing, teach shop basics and ensure the quality of those entering the workforce.

Tramp oils, which are machine lubricants and hydraulic fluids that find their way into the coolant, can seriously hinder the coolant's performance. This article discusses the properties and components of machine maintenance fluids that can ensure their easy separation and removal from the coolant.

This report of a Cutting Tool Engineering survey charts the shift in the way shops are purchasing tools. As the survey’s findings indicate, an increasing number of tools are being bought directly from manufacturers and many shops are narrowing down the number of tool suppliers they do business with.

Tap and tapholder manufacturers have introduced technology to speed up the inherently slow tapping process. This article reviews a number of innovations, including tension/compression holders for rigid tapping, self-reversing tapping heads and quick-change tapholders.

This article provides a review of the research and technology trends that will shape metalcutting in the years to come. Innovations in workpiece materials, coatings, machine tool design and nontraditional machining are explored.

This article looks at the close partnership forged between a toolmaker and a machine tool manufacturer. The alliance requires the two to share detailed information about proposed products as well as the customers each is working with. Such cooperation has made it possible to develop several new products and processes.

Grinding research has led to innovations in wheels and machines, which have expanded the range of applications grinding can be used for. This article highlights some of the research being conducted and the work that has made it to the shop floor. An accompanying article discusses CBN abrasives.

Business insurance represents a costly but necessary investment for any shop. This article presents the findings of a Cutting Tool Engineering survey of the liability insurance purchasing habits of readers. The article also offers some guidelines for insurance shopping.

With safety and health precautions driving up the cost of using metalworking fluids, many shops are attempting to machine dry. This article looks at the reasons why a shop might want to eliminate coolants and the effects this decision will have on part quality and tool performance.

With the introduction of high-speed milling, tool balancing has become increasingly important. This article describes a system that can balance tools while they are mounted in the machine tool’s spindle and rotating.

To produce graphic electrodes for EDMing large cavities, shops sometimes must machine the piece in smaller sections and bond them together. This article explains how to build and use a bonded graphite electrode so that a ridge at the electrode’s bond line can be avoided.

Graphite electrodes are extremely difficult to machine because of the material’s abrasiveness. This article explains why it takes an endmill with a CVD diamond coating and multiple flutes to cut graphite without wearing tool quickly.

This article explains how state-of-the-art tool presetting-and-measuring machines can reduce a shop’s tool setup time while increasing precision. The article also describes how the additional functions of these high-end units can turn them into sophisticated tool-management systems.

Tantalum and Niobium are important components in the composition of carbide tools. They are also among the most expensive. This article explores how recent trends in metalcutting and tool usage will effect the supply of these two components.

Adequate flushing is needed to keep EDM wires from breaking. This article explains why wires break, and how dielectric fluid delivered with sufficient flow and pressure can prevent these failures from occurring even in less than ideal conditions.

Centralized mineral filtration for wire-EDM dielectric fluid can remove contaminants down to the 1-micron level and dispose of them in an environmentally responsible way. This article describes the mineral filtration process and compares it to the other common filtration methods.

The growing use of difficult-to-machine materials has driven the metalcutting industry to high-performance tools. This article reviews the trends that are behind most cutting tool research today, and it looks at the state-of-the art results of that research.

The presence of bacteria and fungi can seriously compromise the effectiveness of metalworking fluids. This article looks at the most harmful microbes and the conditions that allow them to flourish. Preventive measures are also discussed.

This article makes the argument that an insert is really a system made up of a combination of factors. The focus of the article is on one of these factors: the top-form geometry, which has evolved from the chipbreaker designs used primarily on turning inserts. The roles these geometries play and the selection process for choosing the right geometry are explained.

Rotary saw cutting (RSC), using a self-contained, motorized attachment that is mounted in a machine's standard cutoff position, can provide an alternative to single-point tooling for cutoff operations. This article details the ways that RSC provides results that are better than single-point tooling while advising readers on ways to optimize the operation.