Milling Cutters

DoFeedTri High-Feed Milling Cutter

Ramping down, the cutter first bottom-cuts the surface with the leading insert, then further cuts the same surface with its trailing insert. DoFeedTri inserts are designed with a long “inner” cutting edge that can bottom-cut more material than conventional milling inserts when trailing the leading insert during ramp down operations. This makes DoFeedTri a perfect tool for productive ramp down operations.

EASTEC 2021 Booth Visit with Gorilla Mill

Gorilla Mill President and Owner Kevin Cranker offers Cutting Tool Engineering a quick tour of the company's booth at EASTEC 2021, highlighting two new Gorilla Mill lines: the Arsenal' lines during Cutting Tool Engineering's EASTEC 2021 booth visit. Cranker begins the tour by featuring the company's new Arsenal line of Picatinny cutters along with a new line of Lemur chamfering mills.

EASTEC 2021 Booth Visit with Mikron Tool

For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).

For more about these products, visit the Mikron Tool website.

Xtra·tec XT M5004 Octagon Milling Cutter

The M5004 octagon milling cutter combines efficiency and process reliability while also extending tool life, resulting in maximum productivity. Process reliability is enhanced thanks to the new tool's high stability. Lower tool costs and reduced time and labor result from its universal usability and no need for additional finishing operations.

MFH-MAX High-Feed Milling Series

MFH-MAX Produces Larger Depth of Cut Capabilities

The MFH-MAX provides a new alternative to conventional 90° end mills when roughing to medium-finishing. The MFH-MAX also provides more capabilities than conventional high-feed mills by reducing the number of tool paths and machining time when cutting workpieces with large variations in machining margins.

High Feed Square Cut Size 14 Milling Systems

Not only does this solution make it easier to machine sticky materials, but it is designed for easy, ergonomic indexing and the pocket and screw designs simplify positioning. The cutters themselves feature a new environmentally friendly coating and their outstanding high feed milling performance reduces the amount of power used in roughing. Yet another step in the right direction for Seco Tools to continue their journey to create more environmentally sustainable manufacturing and machining solutions.

TungMeister Exchangeable Milling Heads Series Expanded

In addition to standard VBO and VBN barrel-shaped end mills for productive finish machining of curved surfaces, TungMeister’s new VBL lens-shape milling head has a convexly shaped cutting edge on the tool’s tip, instead of on the periphery, providing a good solution for machining a complex bottom surface. These end milling heads enable more material removal with fewer passes in 5-axis machining.

Xtra·Tec XT M5468 Round Insert Milling Cutter

Round Insert Milling Cutter Increases Productivity

The Xtra·Tec XT M5468 provides protection against twisting and cutting-edge rotation due to the eight facets on its indexable inserts. It also yields maximum productivity thanks to its ability to support optimum cutting data and promote long tool life, as well as maximum process stability due to the indexing of the indexable inserts using facets. This oversized milling cutter, which handles machining operations on deep shoulders, is easily adaptable to various machining operations due to its variety of indexable insert sizes and geometries. A high level of flexibility is enhanced by a cylindrical modular interface that permits its use in existing adapter systems.

AddDoFeed Milling Cutters

AddDoFeed uses minimal Size 02 inserts of 4 mm (5/32″) inscribed circle and offers close pitch cutter bodies that boast unrivaled insert-per-diameter density for a small diameter indexable cutter. This allows a 16 mm (5/8″) diameter body to carry four inserts and 25 mm (1″) seven inserts for higher feed rates and increased productivity.