Contact Details
Metabo Corp. offers the W2000 7" angle grinder. This new large angle grinder delivers 2,000 watts of power, making it ideal for cutting, grinding and sanding applications where tool weight and ease of handling are critical.
The W2000 is equipped with a 7" wheel guard and features a powerful 15 A motor, 89 inch-lbs of torque and a no-load speed of 8,500 rpm. The W2000 includes Metabo's simplified on/off switch configuration with a safety lock to prevent the tool from accidentally turning on, a burst-proof guard and spindle lock. A three-position side handle allows users to turn the tool 90 degrees to cut vertically, while still having a firm grasp on the grinder. Auto-stop carbon brushes help to increase the tool's service life.
Optional equipment for the W2000 includes a wide range of Metabo abrasives, adapter kits to mount Type 1 and Type 27 non-hubbed wheels, a dustless convertible shroud for concrete surfacing, a Type1 cut-off wheel guard and a carrying case.
Related Glossary Terms
- grinding
grinding
Machining operation in which material is removed from the workpiece by a powered abrasive wheel, stone, belt, paste, sheet, compound, slurry, etc. Takes various forms: surface grinding (creates flat and/or squared surfaces); cylindrical grinding (for external cylindrical and tapered shapes, fillets, undercuts, etc.); centerless grinding; chamfering; thread and form grinding; tool and cutter grinding; offhand grinding; lapping and polishing (grinding with extremely fine grits to create ultrasmooth surfaces); honing; and disc grinding.
- turning
turning
Workpiece is held in a chuck, mounted on a face plate or secured between centers and rotated while a cutting tool, normally a single-point tool, is fed into it along its periphery or across its end or face. Takes the form of straight turning (cutting along the periphery of the workpiece); taper turning (creating a taper); step turning (turning different-size diameters on the same work); chamfering (beveling an edge or shoulder); facing (cutting on an end); turning threads (usually external but can be internal); roughing (high-volume metal removal); and finishing (final light cuts). Performed on lathes, turning centers, chucking machines, automatic screw machines and similar machines.
PRODUCTS
