CoroCut QD, the reliable system from Sandvik Coromant for deep grooves and parting off with long overhangs, expands the offering of inserts and durable tools with over and under coolant. The system is supported with plug and play adaptors for easy handling and efficient coolant supply.
For bar feed manufacturers, process security in terms of good chip control and long reliable tool life is the key to an efficient production. To meet these needs CoroCut QD combines strong tools and inserts with rigid clamping and efficient coolant supply.
An important aspect for long tool life and few machine stoppages is good chip control. This is achieved by combining over and under coolant on all tools which keeps the temperature down at the cutting edge for less tool wear and a more stable performance, while at the same time providing for efficient chip evacuation.
Add to the support plug and play adaptors for easy coolant connection and a rigid, yet user-friendly clamping mechanism for easy insert changes, and you get CoroCut QD. This system not only ensures process security, but also easy handling for real machining efficiency.
At the cutting edge, the cutting forces are high. To withstand this temperature, the tool material has high fatigue resistance and the tool tip seat features a backstop so the insert stays in its position preventing the seat from wearing down when the insert is indexed. Also the inserts themselves are developed with good coating adhesion and high edge-line security, for long tool life in every parting off operation.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Phenomenon leading to fracture under repeated or fluctuating stresses having a maximum value less than the tensile strength of the material. Fatigue fractures are progressive, beginning as minute cracks that grow under the action of the fluctuating stress.
When used in lathe or screw-machine operations, this process separates a completed part from chuck-held or collet-fed stock by means of a very narrow, flat-end cutting, or parting, tool.
Cutting tool and tooling systems specialist Sandvik Coromant is launching GC4330 and GC4340, two new insert grades for steel milling. With the development of advanced production technologies, such as a new substrate, Inveio coating and an improved post-treatment technology, the new grades provide…
Sandvik Coromant is releasing two series of ceramic endmills for optimized performance in nickel-based alloys. The latest brazed ceramic CoroMill 316 and ceramic CoroMill Plura endmills offer a more productive method for roughing in ISO S materials compared to standard carbide milling cutters.
Sandvik Coromant is releasing three new grades for its popular CoroDrill 870 exchangeable-tip drill. GC4344, GC3334 and GC2334 have been developed to offer significant tool life improvements and more predictable wear patterns, all while maintaining the high penetration rates and productivity for…
Sandvik Coromant is set to release two new grades for interrupted hard-part turning operations: CB7125 and CB7135. Available in October 2018, the grades will complete the company’s offer for hard-part turning, complementing the existing CB7105 and CB7115 grades.
Using digital solutions for monitoring of equipment utilization makes workshops far more efficient and profitable than would otherwise have been possible, which is why Sandvik Coromant has introduced CoroPlus MachiningInsights. MachiningInsights is more than a monitoring system. This solution…
Sandvik Coromant, is introducing two new ceramic insert grades that are capable of performing high-speed, high-security turning operations on components made from demanding HRSA (heat-resistant superalloy) materials. The CC6220 and CC6230 ceramic grades are developed to machine demanding materials…
Sandvik Coromant has introduced a high-precision hydraulic chuck for turning operations that offers enhanced pull-out security. CoroChuck 935 has been designed to deliver fast, rigid and secure clamping, time after time.
Sandvik Coromant has launched a new thread forming tap optimized for ISO P steel machining, which is designed to boost productivity, particularly in the automotive industry. The CoroTap 400 offers chip-free tapping, as well as faster machining times and stronger threads through reduced torque and…
Following last year’s launch of PrimeTurning methodology and tools for external turning operations, Sandvik Coromant is introducing a dedicated CoroTurn Prime SL head that makes this process available for internal turning operations. The new SL head will meet the needs of oil and gas, aerospace and…
The CoroThread 266 thread turning tool from Sandvik Coromant is available with precision over- and under-coolant to improve process security and maximize efficiency. The addition of over-coolant improves chip formation for more secure machining, while under-coolant controls temperature for long and…
PRODUCTS
