Sandvik Coromant has announced the introduction of its CoroMill 325 thread whirling inserts and holders. These tools address the growing demand for techniques that produce threads fast and at high tolerances, arising from the special thread forms used for medical bone screws, implants and other micro components. Thread whirling is a fast and accurate way to thread long, slender components in difficult-to-machine materials.
By combining the speed of thread whirling with the rigidity of a sliding head machine, complete threads are produced accurately in a single pass, without the need for special supports. CoroMill 325 thread whirling inserts and holders can produce a wide range of high precision screws and implants from rough stock at high speeds and fit a large number of sliding head machine types.
For many manufacturers, this can eliminate the need for a dedicated thread whirling machine. Thread whirling provides a number of advantages over traditional single-point threading, including increased productivity, faster set up times, no extra costs for finishing treatment, superior chip control and increased tool life over conventional tools.
Process of both external (e.g., thread milling) and internal (e.g., tapping, thread milling) cutting, turning and rolling of threads into particular material. Standardized specifications are available to determine the desired results of the threading process. Numerous thread-series designations are written for specific applications. Threading often is performed on a lathe. Specifications such as thread height are critical in determining the strength of the threads. The material used is taken into consideration in determining the expected results of any particular application for that threaded piece. In external threading, a calculated depth is required as well as a particular angle to the cut. To perform internal threading, the exact diameter to bore the hole is critical before threading. The threads are distinguished from one another by the amount of tolerance and/or allowance that is specified. See turning.
Cutting tool and tooling systems specialist Sandvik Coromant is launching GC4330 and GC4340, two new insert grades for steel milling. With the development of advanced production technologies, such as a new substrate, Inveio coating and an improved post-treatment technology, the new grades provide…
Sandvik Coromant is releasing two series of ceramic endmills for optimized performance in nickel-based alloys. The latest brazed ceramic CoroMill 316 and ceramic CoroMill Plura endmills offer a more productive method for roughing in ISO S materials compared to standard carbide milling cutters.
Sandvik Coromant is releasing three new grades for its popular CoroDrill 870 exchangeable-tip drill. GC4344, GC3334 and GC2334 have been developed to offer significant tool life improvements and more predictable wear patterns, all while maintaining the high penetration rates and productivity for…
Sandvik Coromant is set to release two new grades for interrupted hard-part turning operations: CB7125 and CB7135. Available in October 2018, the grades will complete the company’s offer for hard-part turning, complementing the existing CB7105 and CB7115 grades.
Using digital solutions for monitoring of equipment utilization makes workshops far more efficient and profitable than would otherwise have been possible, which is why Sandvik Coromant has introduced CoroPlus MachiningInsights. MachiningInsights is more than a monitoring system. This solution…
Sandvik Coromant, is introducing two new ceramic insert grades that are capable of performing high-speed, high-security turning operations on components made from demanding HRSA (heat-resistant superalloy) materials. The CC6220 and CC6230 ceramic grades are developed to machine demanding materials…
Sandvik Coromant has introduced a high-precision hydraulic chuck for turning operations that offers enhanced pull-out security. CoroChuck 935 has been designed to deliver fast, rigid and secure clamping, time after time.
Sandvik Coromant has launched a new thread forming tap optimized for ISO P steel machining, which is designed to boost productivity, particularly in the automotive industry. The CoroTap 400 offers chip-free tapping, as well as faster machining times and stronger threads through reduced torque and…
Following last year’s launch of PrimeTurning methodology and tools for external turning operations, Sandvik Coromant is introducing a dedicated CoroTurn Prime SL head that makes this process available for internal turning operations. The new SL head will meet the needs of oil and gas, aerospace and…
The CoroThread 266 thread turning tool from Sandvik Coromant is available with precision over- and under-coolant to improve process security and maximize efficiency. The addition of over-coolant improves chip formation for more secure machining, while under-coolant controls temperature for long and…
PRODUCTS
