Product News

For machining close to the O.D. or I.D. of a workpiece, the Type 01 Adapter extends drills or endmills away from the face of the toolholder for much needed additional reach. Plus, the adapters allow for offline tool presetting for the next job while the machine continues to work uninterrupted.

The microARC 4 reduces both operator workload and cycle times with a high-quality, low-maintenance harmonic drive. The drive provides extremely precise motion control, coupled with much higher rapid speeds than a worm-drive unit. 

The V-855 and V-857 product families were designed for high-load and high duty cycle industrial precision motion applications where traditional actuators or linear slides with lead-screw or timing-belt drives are not precise, robust or reliable enough. Due to the maintenance-free and friction free high-speed linear motors, greater productivity with shorter cycle times and faster return on investment can be achieved.

The Mini Jet a member of our Cell-U-Clean line of parts washers, is an excellent cabinet washer for both small and large parts up to 500 Lbs. where floor space comes at a premium. This spray washer was designed as a high-capacity solution with low energy as an alternative to our heavy-duty cabinet washer product line. The rotary hide away door eliminates the extra floor space required for the door swing while ensuring a dry floor when loading and unloading.

ESPRIT TNG now also enables manufacturers to perform face-milling operations with a unique “roll-in” lead-in strategy recommended by Sandvik Coromant to improve surface quality, reduce cycle time, and extend tool life. This lead-in technique positions the cutter for ideal thick-to-thin chip formation, which indicates that the insert engages the material deeply enough at entry to make a significant cut before exiting smoothly to reduce vibration and ensure consistent, high-quality surface finish.

The tool supply consists of software, hardware and supporting service elements. Using the CoroPlus® Tool Supply hardware, manufacturers can easily store and keep track of tools. Storage options can be tailor made according to facility demands, with tool vending solutions ranging from open stock, drawers and lids to full tool cabinets. Each hardware option allows tools to be securely stored, without the risk of loss or damage.

M213 STREAKERS feature three extremely large flute cavities, uniquely designed end face and gashing, and 37-degree helixes to achieve deep cuts and high feed rates. IMCO’s special end face and flute grinds combine to create a free cutting action allowing aggressive plunging and ramping moves

As the most recent addition to the T-A Pro high-penetration drilling system, this insert demonstrates that the best just keeps getting better. Not only are the faster penetration rates maintained, but in using the redesigned body of the T-A Pro, maximum coolant flow and excellent rigidity are also present when utilizing the high-speed steel geometry. This offers machine shops and manufacturers a spade drill that operates at incredible speeds and a cost per hole that averages 25% less than other existing drills.

EcoAir® 325 Tool & Die Rust Preventative has proved to be a great development for molders. This ready- to-use vegetable oil/solvent-based liquid is packaged in EcoAir® spray cans that rely on compressed air rather than traditional aerosol propellants. It is easy to atomize over a large surface area such as the interior of a plastic injection mold or die. Unlike other mold savers that have a reputation for clogging mold pores and must be cleaned off before use, EcoAir® 325 Tool & Die Rust Preventative does not have to be removed. This makes it extremely easy to bring a mold out of shipping or storage and put into use immediately.

Each lightweight KCI 1319 / KBI 1335 encoder includes a 25 mm hollow shaft and inductive scanning technology that makes it insensitive to contamination and magnetic fields. The encoder communicates using the high speed EnDat 2.2 interface which also allows for additional information, such as temperature or diagnostics, to be communicated as well.

Mastercam Design streamlines and simplifies modeling and editing geometry. It also supports advanced geometry creation, including solid and surface modeling, hybrid machining, NURBS curves and surfaces, 2D and 3D associative dimensioning, surface extension, blending, trimming, splitting, variable filleting, and hybrid modeling to complete your jobs quicker and more efficiently.

FlexMove Helical Plain Bend Conveyors provide customers with unlimited configurations, including flat to flat; flat to incline or incline to flat; or incline to incline. These configurations, which also include inclines and declines through corners and straights, provide great flexibility for applications involving product buffering especially in corners. FlexMove Helical Plain Bend Conveyors also come with a patented side roller chain to reduce corner friction.

The MunchMan uses primary and secondary belts installed at the lower curve and through the incline and chip discharge areas of the system. These belts run in unison to grab chips, compress them and carry them securely up steep inclines. This design eliminates the risk of conveyor jams that can occur when chip balls tumble at the lower curve or jam in the conveyor incline section.

This model is part of the GrindSmart® series of tool & cutter grinding machines with an axis configuration that incorporate 6 fully interpolated axes (3 rotary and 3 linear) and is unique in this industry. The machine also incorporates linear axis drive technology. 

Speeders improve surface finish and reduce cycle times when machining small holes and soft materials, without lengthy acceleration ramps. Reducers optimize the lower speed, higher torque requirements of large holes and tough materials without sacrificing horsepower. In-line holders utilize ER style collets and are available on extensions to machine between chuck jaws.

Due to its heavy cast iron construction, smooth power transmission and precision thrust and ball bearings in the head stock and spindle, the bench lathe  provides years of trouble-free, precise turning. The Bench Lathe is the right choice for turning small metal parts.

The MC128 Advance boasts a wide diameter range of 1/4 -3/4 in. (2-25 mm) with a TiAIN coating for universal use. WJ30TF grade is available for ISO materials P, M, K, and S. The MC128 Advance is well suited for die and mold work as well as general metalworking. The MD128 Supreme provides 64% more tool life when compared to similar competitive cutters. It is a close pitch cutter providing maximum productivity thanks to more teeth, a longer cutting-edge length and material-specific grades.

The closed-loop linear slide uses an optical position sensor with sub nanometer resolution and a voice coil linear motor to allow vertical (or horizontal) travel up to 7mm with a velocity up to 200mm/sec (8”/sec) for fast accurate scanning. Guided by low friction cross-roller bearings, this low-profile linear slide delivers long lasting performance in high duty cycle industrial applications. Ease-of-use is built in with a user-adjustable counterbalance, (e.g. for heavy, large NA microscope objective lenses up to 1kg in vertical applications) and hard stop adjustability to limit the travel range.

A major highlight in the new HALCON 21.05 version is the Generic Shape Matching feature, which makes MVTec's industry-proven shape matching technologies even more user-friendly and future proof. Users can now implement their solutions much faster and more easily, thanks to a significant reduction in the number of operators required. Moreover, thanks to the unification of HALCON’s different shape matching methods into a single set of operators, users can now integrate new shape-matching-related features more easily.

The next generation of the RoboCut features innovative technology, making it the most productive wire EDM machine on the market. Constructed for ultimate rigidity, the advanced EDM machines minimize the amount of distortion embedded into each part. New discharge devices, powered by the SF3 power supply, improve surface roughening capabilities while maintaining high cutting speeds.