Articles & Columns

I generally consider myself to be a positive person. However, these past few weeks have tested my resolve. It’s not the roller-coaster daily life as a machine shop owner, but the stark reality of losing employees and friends to serious illness that’s been especially hard to take. Thankfully, illness doesn’t always mean death. 

Every parts manufacturer, regardless of size, has some sort of training program, and programs are nearly as varied as the companies themselves. Whether it’s something as simple as handing out a pamphlet about company policy or as involved as an apprenticeship program, it’s just a given: Where there are employees, there is training. However, while some companies regard it as a necessary evil, others have found that investing in this universal necessity yields substantial benefits—and, in the long run, actually saves money.

Until I started working for Mitsubishi Hitachi Power Systems Americas, lifting parts was never a consideration in daily production. Previously, the parts I dealt with were small, usually never larger than a dinner plate. Lifting equipment, such as forklifts and pallet jacks, were often employed, but only to move raw materials to a machine tool or to load and unload trucks—never as part of the production process. 

END USER: Van’s Manufacturing Inc., (805) 522-6267. SOLUTION PROVIDER: Omegasonics, (888) 989-5560, www.omegasonics.com. CHALLENGE: Reduce the time and cost to clean machined parts. SOLUTION: An ultrasonic parts cleaner with a filtration pump.

END USER: Crowley Tool Co., (615) 824-5594, www.crowleytool.com. SOLUTION PROVIDER: Schütte LLC, (800) 668-4035, www.schutteusa.com. CHALLENGE: Enhance reliability when grinding round tools. SOLUTION: A new 5-axis CNC tool and cutter grinder with linear-drive technology.

The expression “There’s more than one way to skin a cat” certainly applies to machining. A young programmer in our shop is constantly being run in circles by the whims of those in authority. Newcomers are in a difficult position; they not only lack experience, they generally want to please everybody.

As the plans for more and more machined metal parts include numerical surface finish specifications, the need diminishes to visually qualify that a part has, for example, “a mirror finish with no burrs” or to have the machinist with the finest touch scratch the surface with his fingernail to make sure it’s “matte and rough.”

Arevo Labs hopes its new RAMP leads to better 3D-printed componets for the defense and aerospace industries. Arevo touts RAMP (Robot-based Additive Manufacturing Platform) as the first system of its kind optimized for 3D printing of composite thermoplastic parts. The system includes a 6-axis robot arm and end-effector hardware for deposition. RAMP can accommodate build envelopes from 1,000 cu. mm to 8 cu. m, depending on the size of the robot used. The end effector consists of a deposition head with special thermal management technology for processing carbon-fiber-reinforced thermoplastics.

Without a manufacturing schedule, workpiece materials don’t arrive on time, machine tools sit idle and customers fume. However, scheduling is difficult, especially when multiple-level assemblies and large numbers of components are involved. To meet this need, software companies have developed complex, integrated enterprise resource planning (ERP) systems. Hundreds of such systems exist, from giant multisite suites able to manage (OEMs’) needs to those suitable for a job shop with a handful of employees. 

One of the most enduring issues in the metalworking world is finding and retaining skilled workers, and the 10th annual Metalworking Trends Survey from LoSasso Integrated Marketing, Chicago, showed that this challenge continues. 

END USER: Antron Engineering and Machine Co. Inc., (877) 225-2362, www.antroneng.com. SOLUTION PROVIDER: Eltool Corp., (877) 435-8665, www.eltool.com. CHALLENGE: Mill a long, interrupted slot in a small-diameter bore. SOLUTION: A coolant-driven angle head.

If you’re shopping for a Swiss-style CNC lathe, the available options and machine configurations are truly staggering. Spindle speeds that compete with many machining centers, convertible spindles that turn a sliding-headstock machine into a chucker, thread whirling capabilities, laser cutting heads and enough axis letters to become the next Words With Friends champion.

There are numerous advantages to rigidly holding a workpiece: feed rates can be increased and cutting times reduced, cutters last longer and impart finer surface finishes, and more-accurate parts are produced. At trade shows where vendors offer demonstrations, you rarely see flimsy, difficult-to-hold parts being machined. In the real world, however, such parts are common. Holding parts for secondary operations, such as drilling holes on an edge, can also be challenging.

I’m thankful to share that our machining business has picked up and we’re running near capacity. I can’t get overly optimistic just yet, but good news nonetheless. We haven’t required new equipment, new employees or a second shift, but that could change if business continues at this pace or improves. While this uptick has been a nice morale booster, our energy-focused market remains unpredictable. Even so, we’re getting a bit more confident with our forecasts and planning.

When it comes to highly accurate machining technology, jig boring is better. So say proponents of the century-old machining technique. In the early part of the last century, jig boring started as a better way to make holes. But the technology has since evolved into a more-versatile machining option.

To bring all kinds of useful information right to a machine and facilitate a company’s implementation of Industry 4.0 processing tools, INDEX Corp. has begun supplying its machine tools with a new operating system. Called Xpanel, the OS integrates a machine into a corporate network, allowing machine operators to receive information from other parts of an enterprise. Operators can access drawings, setup sheets, user manuals, quality requirements, and circuit and hydraulic diagrams on a machine’s control panel.

Vertical machining centers are machine shop mainstays, owing in no small part to their versatility, small footprint and relatively low cost. However, in high-volume environments, they tend to lag behind their horizontal counterparts. Fortunately, a pallet system provides a fairly simple fix.

Setup reduction is a common goal of every machine shop. Setup does not add value because it does not provide any measureable productivity. In short, when you are not running a machine, you are not making chips, and, therefore, you are not making money. Setup involves numerous non-value-added activities, including tool measurement, fixture alignment and setting coordinate systems, or offsets. As the term suggests, value-adding activities make a workpiece more valuable by changing its shape or physical properties. Many years in and out of machine shops and manufacturing plants have given me ample opportunities to see and establish some unique and familiar methods for reducing setup times and generating savings. 

END USER: Homeyer Precision Manufacturing, (636) 433-2244, www.homeyertool.com. SOLUTION PROVIDER: BIG Kaiser Precision Tooling Inc., (888) 866-5776, www.bigkaiser.com. CHALLENGE: Minimize endmill runout to extend tool life when producing aluminum-based forceps. SOLUTION: A collet chuck that provides minimal runout.

END USER: Greene Tool Systems Inc., (800) BUY-TOOL, www.greenetool.com. SOLUTION PROVIDER: ANCA Inc., (248) 926-4466, www.anca.com. CHALLENGE: Produce microscale cutting tools more accurately while lowering setup times. SOLUTION: Two grinding machines designed to produce tools smaller than 2mm in diameter that feature robotic arms for loading and unloading tools and wheel packs.