Articles & Columns

In last month's column, the Shop Technology column observed that chip thinning is one of the key concepts programmers and machinists should understand. Presented in this month's column is further discussion about how chip thinning can enhance productivity.

Tracking down the right tool turns a nightmare job into a dream at AB CNC Services & Consulting. Just ask company president Andy Baczynski.

The Look Ahead department in the April 2013 issue of Cutting Tool Engineering also looks at a mechatronic cutting tool for large back counterboring and back spotfacing applications.

Anybody with half a brain can immediately see the usefulness of computer-controlled equipment. The ability of a machine to telescope the work processes so they run in parallel instead of series can turn a single machinist into a one-person army.

Machined metal parts require packaging to protect them in demanding handling, shipping and storage situations, including humid and outdoor environments. Part makers need be aware of how to protect their parts so their hard work is not lost to corrosion or damage.

Achieve tight-tolerance requirements when producing microtools. Grinding machines designed to produce microtools.

Dynamic and aggressive cutting tool demonstrations are common at trade shows. Toolmakers present phenomenal displays, where chips spark and fly and machines move at feed rates that seem impossible. In other words, they demonstrate high-speed machining.

The process of displacing metal instead of cutting it is called many things. But whether they call it form tapping, cold form tapping, thread forming, cold roll forming, roll forming, thread rolling, roll tapping or cold roll tapping, many metalworking professionals are unfamiliar with it, according to Peter Gennuso, applications engineering supervisor for OSG Tap & Die Inc., Glendale Heights, Ill.

Thermal compensation of a coordinate measuring machine's principle structural components and the part being measured helps ensure measuring accuracy over an extended temperature range when the CMM is installed outside of a temperature-controlled area. Such a temperature-compensation system is comprised of temperature sensors and cabling running through the machine to its controller. The more sensors there are the more accurate the system, but these cables can cause mechanical issues and will eventually fray or break because of the constant CMM motion.

My recent past has, unfortunately, included the passing away of several acquaintances, one only 38 years old. I also read an obituary in the local paper about a machinist we formerly employed, a man only in his 50s.\r\nIn addition, an employee's wife was diagnosed with cancer, completely changing his priorities. Around this same time, my youngest brother had a medical scare, and my mother fell in her backyard and broke a shoulder, requiring a 4-week recovery and making it almost impossible for her to take care of her 90-year-old mother.\r\nThese events have brought a sobering degree of reality into my life. That is, the realization that time marches on for everyone and, eventually, something unexpected will impact our lives and our businesses.

Several weeks ago, my wife and I attended a dinner party at her sister's home. One of the guests heard I was in manufacturing and introduced himself. He's 48, married and has five children and a mortgage. He's a pleasant individual, and we spoke about his trials and tribulations over the last few years. He lost his job during the Great Recession and has since been struggling to find a steady job. Unemployment checks and odd jobs, as well as assistance from their church and friends, have helped his family muddle along. His experience is in customer service and sales.

Overcoming a bottleneck caused when programming different machine tools with various CAD/CAM systems. A single CAD/CAM system that can program multiple machine brands.

The spark gap is the physical distance the electric current has to jump off the wire to burn the workpiece when wire EDMing. Controlling the spark gap is critical to achieving required part dimensions and surface finishes. Variables that impact the spark gap include the workpiece material and thickness, wire diameter and type, and part tolerance and surface finish requirements.\r\nThe wire EDM process is physically unstable because of the constant advancement and retraction of the axes. “Wire EDMing does not have or function with a set feed rate like a milling operation,” said Brian Pfluger, EDM product manager for Makino Inc. at the company's Auburn Hills, Mich., facility. Wire EDMing requires a combination of small mechanical and, especially, electrical changes to occur thousands of times per second to be stable and consistent, he added. Makino is headquartered in Mason, Ohio.

A unique manual milling method is available for generating geometrically true spherical surfaces. This technique can be used to machine convex and concave spherical surfaces. Other than the milling machine, the only tools needed are a boring head and a rotary table.

One fond memory from my long-ago youth was playing Rock'Em, Sock'Em Robots with my next-door neighbor. My parents wouldn't get me the game, for reasons I forget, but my friend Ronnie, who always got the latest, greatest games and toys, had a brand-new version. The objective was to manipulate your plastic robot to knock out the other robot by hitting his spring-loaded head, making it pop up.\r\nIn January, the robotics industry was playing Rock'Em, Sock'Em Robots with CBS's “60 Minutes.” The news program broadcast a segment called “Are robots hurting job growth?” based in large part on an interview with Erik Brynjolfsson and Andrew McAfee of the Massachusetts Institute of Technology, and co-authors of the 2011 book, “Race Against the Machine.”

All metals are not created equal. Therefore, neither are the machine tools for cutting them. Parts for extreme aerospace applications, such as in engines, landing gear and flap tracks, must be made of a heat- and corrosion-resistant metal, which typically has a high Young's modulus of elasticity and is difficult to machine. These include titanium, stainless steel and high-nickel alloys.\r\nThe “hard metal” machines that process the parts must be stiff, typically requiring a large mass, and have a large servomotor to create lots of thrust. They also need a high-torque spindle to effectively move the cutter through the material and a high thrust load on the axes of the ballscrews, which often have a low 8mm pitch, to offer an effective mechanical advantage, according to Scott Walker, president of machine tool builder Mitsui Seiki USA Inc., Franklin Lakes, N.J. He explained that the machines are built that way because aerospace customers typically run them slower than 600 rpm, require around 2,000 ft.-lbs. of torque and take maximum chip loads from 0.002 to 0.006 ipt. “So you build this big, rugged machine,” Walker said.

A collection of machine tool products compiled by the editors of Cutting Tool Engineering magazine.

Real-time measurements during metalcutting can offer significant insight into machine tool performance. The parameters to be measured include position, velocity and acceleration of the axes; cutting force; sound; temperature; and acoustic emission, which is not the same as sound, but rather a high-frequency, structure-borne vibration.

A pump on a waterjet machine generates the high-pressure water needed for cutting by taking low-pressure water into a cylinder, compressing the water with a plunger and then pushing the high-pressure water out of the cylinder. During a pressure cycle of intake, compression and expulsion, high-pressure components and polymer seals see the water pressure jump from two-digit inlet pressures to outlet pressures in the tens of thousands of psi.

Produce parts faster without investing in additional fixturing. Efficiently reprogram the parts with the company's CAM software after moving part production to a multitask lathe.