Milling

H330 Series Endmill

The H330 Series is engineered exclusively for high-speed milling of Aluminum applications.

Cutting Tools for Electric Mobility Applications

Electric mobility is becoming increasingly important in the automotive industry. The number of electrically powered vehicles produced is increasing. MAPAL already offers a wide range of innovative machining solutions for the manufacture of individual parts and components that are machined.

Moving ahead with multitaskers

10/17/2018

Author:

Kip Hanson

Mill/turn lathes and multitask machines continue to cut a broad swath across the manufacturing landscape.

Read Article

Keep machining circle unbroken

10/03/2018

High Torque retention knobs keep toolholders in balance.

Read Article

HARVITM Ultra 8X Helical Milling Cutter

Imagine burying a roughing tool in a block of Ti-6Al-4V titanium and ripping away more than 1,000 cm3 (61 cubic inches) of material in just one minute. If you’d been at a recent test of Kennametal’s new HARVITM Ultra 8X helical milling cutter, you’d have seen exactly that. Using a 95 mm (3.74 in.) axial depth of cut, 20 mm (0.78 in.) radially, and a feed rate of 423 mm/min. (16.65 ipm), the 80 mm (3.15 in.) diameter HARVI Ultra 8X plowed through this difficult aerospace superalloy for nearly 3 minutes straight without flinching.

DA110 Perform Drill

The DA110 Perform drill from Walter can be used universally and cost-effectively for a wide range of materials. It delivers maximum accuracy thanks to its precision-ground surfaces and a tip geometry that has been engineered for optimum centering accuracy, while keeping production costs as a primary consideration.

Indexable Milling Advancements - Premium Performance, Maximum Value - Made in USA

From profile and ramp milling to 3D roughing and profile finishing, view footage of Dapra's new products, designed to help you maximize productivity and improve your bottom line.

The EDGE² DSS double-sided square shoulder line delivers the best indexable milling value in the industry, offering premium 90-degree performance, reduced cost per edge and a cutter replacement program.

Rough-duty RDBN ball nose finishing inserts are composed of a tougher carbide and stronger cutting edge for added chipping resistance in demanding applications.

STREAKERS M223 and M233 Endmills

Machining productivity in aluminum alloys takes a major step forward with new STREAKERS M223 and M233 high-performance cutting tools, introduced by IMCO Carbide Tool.

Robot arm reaches for milling goals

10/16/2018

Author:

William Leventon

Machine Technology: Researchers are close to developing a precision robotic arm for more economical milling.

Read Article

HRT1000 and HRT100 Rotary Tables

Rotary tables are ideal for machining multiple sides of a part in a single setup or for machining many parts on a multiple-sided fixture. But handling very large or very small parts can prove challenging without the correct size rotary. The HRT1000 and HRT100 rotary tables from Haas Automation Inc. cover both ends of the size spectrum, providing high-precision 4th-axis positioning and simultaneous 4-axis motion for extra-large and extra-small parts.