Tungaloy Corp. announces the expansion for EasyMultiCut, the multi-functional tool series for grooving: the ETFR-CHP toolholder for face grooving with a coolant hole for high-pressure internal coolant supply. EasyMultiCut features a unique self-clamping insert that provides high tool rigidity.
The toolholder has no top clamping parts to hold down the insert, so smooth chip evacuation is possible in deeper grooving applications. Thus, EasyMultiCut delivers outstanding productivity even in face grooving operations where chip evacuation is usually difficult.
Also, the toolholder has a coolant hole, therefore ample coolant is constantly supplied to the cutting edge, achieving stable and long tool life.
Main features:
■ Applicable for face grooving with groove width 0.157” (4 mm); ø1.181” to 19.685” (ø30 to 500 mm)
■ Maximum groove depth: 0.984” (25 mm)
■ Excellent chip evacuation allows high speed machining, leading to incredible productivity.
Fluid that reduces temperature buildup at the tool/workpiece interface during machining. Normally takes the form of a liquid such as soluble or chemical mixtures (semisynthetic, synthetic) but can be pressurized air or other gas. Because of water’s ability to absorb great quantities of heat, it is widely used as a coolant and vehicle for various cutting compounds, with the water-to-compound ratio varying with the machining task. See cutting fluid; semisynthetic cutting fluid; soluble-oil cutting fluid; synthetic cutting fluid.
Machining grooves and shallow channels. Example: grooving ball-bearing raceways. Typically performed by tools that are capable of light cuts at high feed rates. Imparts high-quality finish.
The addition to the "TPW / EPW Type" series includes CBN inserts designed for high-speed cast iron finishing. In addition to the economical 2-corner standard insert, a wiper insert option is also available to achieve excellent surface finish. The insert grade is High-content CBN "…
The new AM Type insert is designed for non-ferrous metal machining, featuring a sharp cutting edge achieved through ground peripheral surface and polished rake face to a mirror-like finish. This design reduces built-up edge during machining and ensures a high-quality, glossy surface finish. The…
The new Neutral AJ Type inserts for non-ferrous metals join this lineup. Like their right-hand counterparts, these new inserts feature ground peripheral surface and polished rake face with a mirror-like finish for sharp cutting edges. This prevents the built-up edges to the cutting edge during…
The DXGQ/U0703 inserts feature 55° nose angle with brazed CBN tips that are designed for hard part turning applications. The inserts incorporate HP chipbreaker and use WavyJoint brazing technology for the CBN tips which are designed to provide enhanced insert reliability during hard part turning.…
The TungHeavyGroove toolholders utilize a frontal coolant system, delivering high-pressure cutting fluid from the bottom to the flank face of the cutting edge. This innovative design enhances chip evacuation and extends insert tool life significantly. Furthermore, an extremely rigid dovetail insert…
The round shank toolholders are designed to fit the cylindrical shank tool holders in most Swiss type lathes. Just as with the existing ModuMiniTurn square shank toolholders, the new round shank toolholders also features extremely high repeatability accuracy, which significantly reduces downtime.
Built on the proven features of the conventional XVCT-AJ inserts, the XVCT-AM inserts introduce an enhanced interface design. This design improves insert retention during high-speed machining while reducing raw material usage for insert production, all without compromising superior cutting…
Two new key sizes have been added: KHS-TID6-9.99 covers the drill diameter range from 6.0 to 9.9 mm (.236″ to .340″), while KHS-TID20-25.99 from 20.0 to 25.9 mm (.787″ to 1.020″). In addition to the key size that already exists for 10.0 to 19.9 mm (.394″ to .783″), these three key sizes cover the…
KKH cartridge modules take all customized fine boring tooling, whether they are designed by SwissBore or not, and turn them into a state-of-the-art fine boring solution that have one thing in common: they are all digital ready. The cartridge modules allows both radial and axial adjustments. Radial…
This expansion increases GH730 grade options of the VST and VTB slot milling heads and the VTR thread milling heads. A PVD grade consisting of extremely wear-resistant coating layer, combined with a tough carbide substrate dedicated to the coating, GH730 provides much better wear resistance than…
PRODUCTS
