With the ability to rapidly dial in runout with complete control, users spend less time tapping on the side of the tool and resetting tools and collets. Overall efficiency is increased, machining costs are lowered, and scrap is reduced with easyZERO.
Diatool does not limit the times a reamer can be reconditioned, providing an even longer service life of the reamer with no compromise in tool life or cutting quality. Offering standard deliveries of 4-6 weeks and cost savings of 40 percent over new, Diatool’s Reamer Reconditioning Service is ideal for machining operations struggling with long…
Monaghan Tooling introduces the newest version Reamtec easyZERO runout compensation nuts, with improved precision to allow for up to 0.002” (0.050 mm) runout to be dialed in easily and quickly. Users can correct runout errors and misalignment for all round tools using ER collets in just minutes, with virtually no scrap.
Monaghan Tooling Group introduces their easily assembled Top Speed Ring, a reamer that allows up to 70% higher feed rates than traditional cutting rings. These modular Top Speed Rings require no setting, so they are ready to use right out of the box.
Monaghan Tooling Group introduces their Mechanical Joining Tools, which join tubing to flanges and fittings, creating secure, leak-proof joints that withstand up to 20,000 lbs. of hydrostatic pressure. Superior to welded, brazed or crimped joints, mechanically joined parts will not leak, pull apart, or loosen due to pressure, vibration, or…
Monaghan Tooling Group (MTG) announces a first-of-its-kind program that provides new product engineers with an easier and faster way to build higher-quality and more profitable products. Called the Engineered Success Guarantee, this new program virtually guarantees that an engineer’s new product or part that uses Monaghan’s tooling will meet the…
MK Tools solid-carbide round tools from Monaghan Tooling Group introduces new "Speed-Drill R4" geometry, reportedly offering unparalleled cutting speeds and unprecedented tool life when cutting gray cast iron, ductile iron and forged steel, which are popular materials in automotive engine and chassis components. With a new corner radius…
Swiss ID burnishing tools by Elliott Tool Technologies are ideal for accurate sizing, low microfinishing and surface hardening of ID holes down to 4 mm. With the tool body completely inside the tool block, the new 5918 series features an adjustment knob which protrudes from the rear of the tool shank, thus allowing the burnishing tool size to be…
MK Tools’ solid-carbide round tools from Monaghan Tooling Group introduces new “Speed-Drill R4” geometry, reportedly offering unparalleled cutting speeds and unprecedented tool life in gray cast iron, ductile iron and forged steel—all popular materials in automotive engine and chassis components. With a new corner radius design, which is…
Carbide-Roll burnishing tools by Elliott Tool Technology produce a mirror-like surface finish while eliminating secondary operations, machining setups, and operator labor and cost. These cost-effective, easy-to-use carbide rolls from Monaghan Tooling Group improve surface irregularities and tool marks, producing optimum surface finishes of 4-20…
ReamTec easyZERO runout compensation nuts quickly correct runout errors and misalignment for all round tools using ER collets. Easy-to-use, innovative replacement nuts feature six adjustment screws that allow for up to 0.011” runout to be dialed in easily, allowing for more accurate machining, tighter tolerances and better surface finishes—…
Diamond burnishing is ideal for a variety of parts and ductile metals under 40 HRC, including steel, stainless steel, aluminum and cast iron. A cast iron shaft which started at a preburnished 67 Ra microinch surface finish yielded a 10 Ra microinch finish with a 0.0005” material compression in a single pass at 750 sfm.
Dayton, OH – Custom tooling requests are not unusual at Monaghan Tooling Group, and each gets special attention. They are all important. However, when it’s a life-or-death situation, you tend to pull out all the stops.
As of Jan. 1, 2024, all support for Elliott Tools will transition to Elliott. This includes sales and service support for all metal finishing, burnishing, recessing and mechanical joining tools previously sold by Monaghan. This will open the door for the company to focus on its goal of being a “cutting tool expert.”
Monaghan Tooling Group welcomes industry veteran Mark Doré to the sales and business development team. He will work out of his home office in the U.K. and is responsible for growing the burnishing, recessing and mechanical joining tool sales to existing and potential customers in Europe, Africa, the Middle East, India and Australia.
Monaghan Tooling Group (MTG), Dayton, Ohio, a marketing and engineering company that provides the metalworking industry with world-class engineered tooling and services-is pleased to announce that Nick Coates has joined the company as Marketing Manager.
Monaghan Tooling Group, Dayton, Ohio, welcomes industry veteran Brett Scruggs as a technical account manager. He will work out of his home office in northwest Indiana and is responsible for servicing existing accounts and developing new business in Indiana, Illinois, Wisconsin and Iowa.
