Product News

The Lintech 100 series linear positioning slides maximize performance while minimizing physical size and cost. These linear slides use a low friction, preloaded, recirculating linear ball bearing system, which ride on precision ground linear square rail guide.

The Eldorado M75-48T is a two-spindle gundrilling machine with 48 inches (1,219 mm) of slide travel. This is 60 percent more slide travel than the standard Eldorado model offered by the company. The additional length allows the machine to accommodate nearly all the gundrilling applications a job shop will encounter.

Tungaloy’s new T9225 insert grade is joining the earlier successes of T9125 to complement the T9200 CVD grade series for steel turning. T9225 brings an exceptional combination of unparalleled wear resistance and top-notch edge toughness of all P25 grades available on the market to every steel turning application.

ANCA's iView measuring system that can measure the ground tool in its original clamping inside the grinding machine. This feature has recently been further enhanced with a new camera bracket design that allows operators to visually inspect and perform manual measuring of parameters like endface land width, lip distances, chisel angles and more.

As part of its ongoing commitment to empower organizations to create safer work environments and comply with OSHA standards, Rockford Systems LLC has introduced an automatic sanding belt holder that enables lathe operators to sand, polish and deburr while keeping hands away from rotating parts and at safe operating distance away from the spinning shaft and, thereby, helping to prevent entanglement.

BIG KAISER announces the MEGA Micro Coolant Nut, a developed solution to provide precise coolant supply to micro cutting tools applications at high speeds.

No. 1021 is a 1250º F high-temperature belt conveyor oven from Grieve, currently used for drying steel nesh (sieve) materials at the customer’s facility. Workspace dimensions of this oven measure 21” W x 38” D x 3” H, and 40 KW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 1600-cfm, 1.5-hp recirculating blower provides vertical downward airflow to the workload.

CNC Software Inc., producers of Mastercam CAD/CAM software, announces a 3-axis and 4-axis milling post processor that will unleash the highest productivity on SINUMERIK-controlled machine tools. This new post processor was developed utilizing the technical expertise of Siemens CNC engineers.

Walter has introduced the D3120, an indexable insert drill built to provide trouble-free drilling in virtually all conditions. It features square positive indexable inserts with four cutting edges, enabling it to reduce cost per cutting edge.

SMIRT 2019 R1, the latest release of Vero Software’s powerful viewing and manufacturing solution for the die-mold industry, introduces new on-machine inspection functionality and enhanced templating functionality for added process planning automation.

The new HighLight SQD option for Coherent HighLight fiber lasers provides cutting and welding systems integrators with a turnkey, simple to use and cost effective means to implement process monitoring. The HighLight SQD comprises process sensors integrated directly into Coherent’s special fiber laser connectors which detect back reflected laser power and visible spectrum process emissions. These signals, which are provided in either analog or digital CAN bus form (at a 2 kHz sampling rate), can be used to detect various key process events.

Seco Tools has expanded its long-reach turning and boring solutions with additions to its series of Steadyline vibration-damping turning/boring bars and their respective heads. The new additions include 1.00" (25 mm) diameter Steadyline bars, GL25 turning heads and 4.00" (100 mm) diameter Steadyline bars, along with a range of rough and fine boring heads for Steadyline bars.

NCSIMUL MACHINE simulation and optimization software from SPRING Technologies helps aerospace and other manufacturers create “digital twin” process models that facilitate fulfilment of customer demands for higher production rates and unwavering product quality.

igus has introduced a flexible cable for use in energy chains that delivers motor power and feedback functions through a single cable. The new CF280.UL.H cable is a hybrid servo cable offered as an expansion to the chainflex line of cables for moving applications.

Liftomatic Material Handling Inc. introduces FTA drum handling units. The FTA drum handling units are designed for loading, unloading, palletizing and storage of steel drums in nearly any size or configuration, including 30 gallon, 55 gallon and 85 gallon.

A circular connector is a coupling device built with a circular interface and cylindrical contact housing which comes with a huge variety of materials, sizes, contact layouts and types, and coupling designs. These circular connectors are commonly utilized for data, signal and power connections in the automation, manufacturing, military, aerospace and transit industries thanks to their rugged mechanical performance and ease of connectivity. They are also very versatile and flexible because of a wide range of contacts, voltages, and currents that can be conveniently featured based on the requirements of the applications.

What is the main purpose for coolant application? Of course, among many reasons, primarily it’s for the lubrication and cooling of the cutting edge and, in addition, to help facilitate chip evacuation. REGO-FIX has launched a cost-effective and efficient attachment for the application of coolant-lubrication liquids through the tool, based on an ER collet nut, which is suitable for use on SUHNER feed drilling units.

The L.S. Starrett Company has introduced its AV450 Automatic Vision System. Versatile, accurate, fast,and American made, the new 3-axis vision system allows users to cost-effectively achieve high throughput in their inspection process, and is suitable for both repetitive, larger part-run applications and routine quality assurance.

Weldcote Metals, a division of Zika Group, announced the availability of a comprehensive line of metalworking abrasives, many of which will be made in the U.S. at Weldcote’s production facility in Niles, Illinois. The entire line includes more than 900 new SKUs.

In cases where the cutting tool must be moved towards the workpiece, insufficient or not many practical solutions are readily available. This gap is being closed by the SUHNER robot machine tool program. One option is to bring the workpiece towards a standard stationary SUHNER machining unit. Today, SUHNER offers the possibility to adapt and guide the tool by the robot.