Product News

For each gear type, the software has a unique set of definitions, evaluation algorithms and reporting graphics conveniently packaged in one add-on module, making it easy for users to bring a new capability to their existing CMM. The module supports alignment of the gear axis during measurement using any of the three CMM axes and traditional touch trigger probes or advanced scanning probes.

The specially designed multipurpose saw effectively works on a variety of materials that includes wood, plastic, composites and ferrous and non-ferrous metals. It comes with two blades -- a ¾-inch-14 TPT metal blade and a ¾-inch-TPS wood blade.

The Okuma MA-600HIII features an enhanced coolant management system, ball screw cooling for the X, Y and Z axes, an upgraded workspace design to prevent chip accumulation, and improved chip evacuation functionality. This level of innovation maximizes uptime and allows for long periods of continuous machine operation.

Offering an all-round package for modern production in the Industry 4.0 era, GROB provides 12 modules ranging from planning to engineering to maintenance. Each GROB-NET4Industry module is designed to increase productivity. Users can select from among these modules and combine the most relevant for the best system to ensure transparency and connectivity.

Cost optimized for large quantities, the lightweight P-604 amplified piezo fixture actuator provides a large travel of 300µm in a small footprint of 13x20mm, engineered for a long maintenance-free life. Zero-play flexure guides deliver frictionless and ultra-straight motion. At the heart of the motion-amplifying flexure design is a multilayer piezo ceramic element, of the same proprietary construction as the ones used on the Mars rover for their extreme reliability and lifetime beyond 100 billion cycles.

Eriez Ultra High-Frequency Eddy Current Separators offer an economic solution to improve Zorba recovery without the requirement for expensive sensor-based or optical sorting equipment. Each unit ships with an Eriez Brute Force Vibratory Feeder to ensure even presentation of material across the width of the machine to help maximize recovery.

Parlec BMT65 tool holders are available in I.D. styles for 1”, 1-1/2” 25mm, and 40mm tool diameters for single-sided holders and in 1-1/4” for double-sided holders. O.D. style holders are available in 1” and 25mm for both single and double-sided setups.

The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic materials for longer insert tool life. Also, a small approach angle directs the cutting forces in the axial direction towards the spindle.

The new Multiaxis Unified toolpath allows you to select multiple pieces of input geometry to generate the toolpath pattern. Using those geometry choices, the toolpath picks the best algorithm to calculate the path. This single toolpath gives you access to all the surface-based toolpaths, as well as the geodesic toolpath options, in a single interface.

The FullShop Automated Coolant Management System from 168 Manufacturing automatically manages coolant levels and concentrations by sensing and pumping properly mixed coolant to as many as 120 CNC machines. Meanwhile, the LNS Venturi Pump continuously removes and filters coolant from the chip hopper and returns it to the machine sump, thus eliminating cross contamination from central recycling.

New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally compressed and curled chips, allowing excellent chip evacuation and superior surface finish.

The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.

The operational temperature of the Mencom standard metal rectangular connectors is between -40°C and 125°C. However, the Mencom high-temp series enclosures and inserts are designed to withstand a higher range of temperatures up to 180°C (356°F) and cold temperatures down to -40°C (-40°F) when they are installed together. The enclosures are made of die-cast aluminum coated with high-temperature resistant, red-colored thermosetting powder.

This is the third ModuleWorks release of 2021 and contains new and enhanced features across the entire product range, including new multi-axis hole making cycles with independent feed rate control, a new morph pattern for laser aided manufacturing and a collision-free solution for robotics post processing.

Pin Vises have a small footprint, allowing room for more parts on a table resulting in increased throughput.  Pin Vises are also lightweight making them ideal for automated applications where weight is a consideration. 

There are two indexable insert sizes with facet—SDMX0904ZDR-E27 and SDMX1205ZDR-E27. The M4002 cutter provides a depth of cut of 1.5 or 2.0 mm and is available in diameters of 25-125 mm or 1-4 in. and is ideal for high-speed milling in steel and cast iron, stainless steel and materials with difficult cutting properties. And for demanding machining in mold and die making and general machining.

Both grinders feature a RAPIDSTOP™ Brake for enhanced user safety, stopping most wheels in less than two seconds. The grinders are available with either a paddle switch, designed for increased comfort and ease-of-use when operating in various positions, or a slide switch, designed to reduce user fatigue. Tool-free guard adjustments provide faster guard installations and adjustments to keep users productive on the job.

EcoShield® 386 FD Water Based Micro Corrosion Inhibiting Coating is a force-dry version of Cortec’s top water-based anticorrosion coating, EcoShield® VpCI®-386. As such, EcoShield® 386 FD offers excellent corrosion protection at 1.5-3.0 mils (37.5-75 µm) DFT (dry film thickness). The advantage is that EcoShield® 386 FD force-dries in only 5-10 minutes at 150 °F (54 °C) and has good hot hardness, which keeps the hot coated parts from sticking together before they can cool down.

Using Alum-Renew prior to painting improves even distribution of high-performance resins through reduction of surface irregularities.  The kit allows users to try products of varying intensities before purchasing selected materials in production quantities. 

The TS 760 probe offers extremely high accuracy (±1 µm) and homogeneous switching behavior over 360°. And for 3-D measurement, the feed rate/probing speed of 1 m/min is four times faster than other commercially available products that offer the same impressive repeatability of (2σ ≤ 0.25 µm).