Product News

TMAC 3.0 has been completely redesigned with an intuitive streamlined user-interface that offers numerous configurations for viewing tool monitoring and sensor data.  The TMAC system processor now houses its own web server, making the HMI (human-machine interface) browser-based, which enables real-time monitoring from any network connected device. Users (with assigned permissions) have live access to all TMAC systems on a shop floor from a single browser.

Features a maximum measuring speed significantly faster than competitive CNCs. The combination of high speed and high acceleration dramatically reduces measuring time and cost. Users can set measuring paths for high speed scanning, 3D and active scanning of complex workpieces.

The T-A Pro drill combines material-specific insert geometries, a redesigned drill body and a proprietary coolant-through system to allow penetration rates which run at speeds nearly 30% faster than other high performance drills on the market. Coolant outlets are designed to direct maximum flow to the cutting edge providing quick heat extraction where it is most critical - even at significantly higher speeds.

UP! Video Chat helps refine the estimating process through the enhancement of a virtual visit. Imagine being able to take your phone or tablet and actually show a service provider the problem in real-time as you review repair options. With its ability to seamlessly switch from a horizontal to a vertical view, a requester can get into the machine and move around to get the view the service provider needs to begin to diagnose the issue. Through UP! Video Chat, the diagnosis and repair can often begin virtually and the service provider can develop a more accurate estimate in terms of both cost and time to repair.

This Grieve truck oven has 6” insulated walls, an aluminized steel interior and aluminized steel exterior with enael finish. Features include a purge timer, two-position dampers on fresh air inlet and exhaust outlet and a 1200 lb. capacity stainless steel loading truck. Additional features include a 325 CFM powered forced exhauster with an airflow safety switch. The oven includes all safety equipment required by NFPA Standard 86, IRI, FM and OSHA.

The line provides positioning accuracy and repeatability of +/- 1µm. A thermal compensation system employs sensors on the machine faceplate and inside the spindle to minimize the effects of temperature changes on part accuracy and cut temperature-generated displacement by 60 percent. This system also reduces Z-axis thermal growth and deflection by 30 percent. Cooling systems for slide way lubrication and ball screw cores stabilize axis feed precision.

The new S-5x range comprises the S-50 SD and S-50u micro SD memory cards at a very competitive price point, alongside the high-endurance S-56 & S-56u versions which use 3D pSLC mode to achieve a tenfold increase in endurance. All support a full temperature range from -40°C to 85°C.

HALCON 20.11 will be released simultaneously for both the Steady and Progress editions. As a result, HALCON Steady customers can now access the many new features available in the last three Progress releases, including anomaly detection, the generic box finder, and optimized identification technologies.

MillQuadFeed is a new generation of high feed milling cutters, offering two options of insert geometries that cover various high feed milling application needs. Versatile ZER geometry generates light cutting load at great depths of cut, enabling increased cutting depths and reduced number of machining passes. This is particularly effective to boost productivity in challenging rough milling operations of cast iron where a cutting depth can greatly vary on a single working surface.

Specially designed coolant holes that are central to the body diameter and ID diameter to maintain the thickest and strongest body design for superior grip strength with coolant flow directly targeted at the “vortex” intersection for maximum coolant follow to and through the cutting flutes.

DrillMeister incorporates a unique self-locking interface that enables simple and secure drill head exchange. Since drill heads can be replaced without having to remove the drill body from the spindle tool setup time can significantly be reduced, eliminating presetting, offset, and touch off of the replaced tool.

The Type ATG utilizes THK Circular-Arc Raceway Technology for equal to or higher permissible load capacities than Gothic Arch Raceway designs. Circular-Arc Technology achieves less differential slip between the ball and the raceway, resulting in reduced cage displacement, as well as decreased friction and wear. Full stroke reliability is achieved due to the shape of the grooves.

The EasySwitch vacuum creates a powerful vacuum (at a quiet 79 decibels) without the need for electricity. Because the vacuum generator has no moving parts and uses no electricity, there is little concern for failed parts, motor failure or working with liquids associated with electric industrial vacuums.

The V-817 linear stages, engineered for highly dynamic and precise motion, boast a load capacity of 600N, travel ranges from 8” (204mm) to 32” (813mm), and velocities to 3000mm/sec. Driven by 3-phase linear motors and guided by robust recirculating ball bearing guides, the low-profile design of only 63mm minimizes moving mass and tilting errors. An integrated linear encoder provides <1nm resolution and when operated with PI’s industrial motion controllers, the stages achieve 10nm minimum incremental motion, 1µm bidirectional repeatability, and 2.5µm accuracy.

JOC (PA) now fully automates CAD import, whereby a folder can be monitored for a CSV file containing details of DXF files to process, material, thickness, quantity required and machine to nest for. An existing system such as CAD, MES or MRP could generate a CSV file that would be  immediately imported, tooled for multiple machines, nested, with NC code being available  within minutes and all completely without any user intervention.

The Clamping Module is ideal for totes, boxes, bottles and square, round and rectangular containers. As products pass through the Clamping Module, pre-programmed photo sensors trigger a pneumatic-clamping actuator that is mounted on both sides of the conveyor. The Clamping Module produces a gap of about one product length; product must be able to withstand some back pressure and squeezing force.

The use of touch screens, panels, displays, and monitors on production machines has now become common practice and is defined by the VESA standard for mounting monitors. Winco utilizes this standard to create a practical interface in the form of a monitor mount that is coordinated with the existing portfolio. The monitor mount is focused on the core functionality, and the connection stud makes it extremely simple to fasten the mount to all tube clamp connectors according to the given installation situation. In combination with rotary or flanged joints, it is possible to realize any number of degrees of freedom and adjustment options.

Boring bar grinding on the Rollomatic 6-axis tool grinding machines offers exceptional flexibility in comparison to conventional single-puropose grinders. With its 6 fully interpolating CNC axes and 6-station wheel/nozzle changer, the machine can easily be adapted for individual boring bar designs, both for short and long runs.

The GARANT Master Tap INOX is suitable for producing through and blind hole threads with a tolerance of 6GX. As with all tools from the GARANT Master Tap product range, it provides top process reliability, performance capability, and a long working life because a special cutting edge geometry provides evenly turned chips that are ejected in a targeted way due to the optimized flutes. The backs of the teeth are specially designed to shear off the chips, polish the chip roots, and prevent loose or twisted swarf from forming.

The EN-20 product series features industrial grade 3D NAND supporting an ambient temperature range from -40°C to 85°C. The managed device combines high grade NAND Flash chips, a sophisticated PCIe controller and firmware that supports demanding applications. The PCIe 4 lane interface with backwards compatibility to single or dual lane system designs operates according to the latest PCIe 3.1 specification and offers high bandwidth up to 1600 MB/s for sequential read and 770 MB/s for sequential write.