Home

Inserts

Tungaloy small insert lines

Tungaloy going small. Small inserts, outstanding productivity. Featuring the AddDoFeed for maximum speed and efficiency at minimum size, Tung-Tri for small shoulder milling operations with cost-efficient inserts and outstanding chatter stability, TungForce-Rec versatile shoulder milling cutter with unique V-shaped bottom for maximum productivity, AddInternalCut four-edged insert for small internal grooving operations with a minimum diameter of 0.438”, and AddMeisterDrill — the world’s smallest exchangeable head drill series with 0.004” increments.

CBN Grade WBH30

CBN Grade WBH30 Hard Turning in Interrupted Cuts
Additional improvement in surface quality and stability can be realized with advanced wiper geometry option. Walter offers the new WBH30 CBN grade in inserts with and without MW wiper geometry, and with a negative T-land chamfer for excellent strength in interrupted cuts.

Guhring's System 222 for grooving and parting-off

Guhring Inc. highlights the features of its System 222 (two cutting edges, 22 mm length) for grooving and parting-off in this brief video. Carbide inserts have chipbreaker and cutting geometries pressed into them during sintering for maximum consistency. Left-hand, right-hand and neutral insert designs provide optimal productivity. Square shank and parting blade toolholders are available with or without coolant through. 

DoFeed LNMU0303UER Inserts

DoFeed Inserts Improve High Feed Milling Performance in Exotic Materials
The new LNMU0303UER inserts are designed to provide a smaller approach angle than existing LNMU0303ZER inserts when set on the cutter body so that the insert generates thin chips. This chip thinning effect reduces cutting loads, minimizing damage on the cutting edges during machining of exotic materials for longer insert tool life. Also, a small approach angle directs the cutting forces in the axial direction towards the spindle.

MiniForce-Turn

MiniForce-Turn CBN Inserts Offers Exceptional Reliability in Hard Turning
The MiniForce-Turn series offers innovative double-sided turning inserts with positive rake cutting edges on both sides. These proven inserts are capable of soft cutting action similar to that of positive inserts with an added advantage of double cutting edges.

DuoJust-Cut

DuoJust-Cut
New parting inserts are offered in the JXPS style : a 0.6 mm (.024″) width insert is designed for maximum parting diameter (CUTDIA) of 6 mm (.236″) and a 0.8 mm (.031″) width insert for 12 mm (.472″) CUTDIA, both furnished with pressed chipbreaker. This intricate chipbreaker creates optimally compressed and curled chips, allowing excellent chip evacuation and superior surface finish.

SDMX Indexable Insert

Universal System of Indexable Inserts Reduces Cost and Lowers Power Requirements
There are two indexable insert sizes with facet—SDMX0904ZDR-E27 and SDMX1205ZDR-E27. The M4002 cutter provides a depth of cut of 1.5 or 2.0 mm and is available in diameters of 25-125 mm or 1-4 in. and is ideal for high-speed milling in steel and cast iron, stainless steel and materials with difficult cutting properties. And for demanding machining in mold and die making and general machining.

AH3225 Insert Grade

AH3225 Insert Grade Further Enhances Shoulder Milling Performances
AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased thermal shock resistance and hardness reducing thermal crack generation on the cutting edge. This prevents unpredictable insert failure, significantly extending tool life and reliability for steel machining.