Home

Products

+ click to show 21 results
Automatic Parts Loader
Many shops today are looking to automation and automatic part loading as a means to reduce costs, increase throughput, and cope with the ongoing shortage of skilled labor. The Automatic Parts Loader (APL) from Haas Automation Inc. is a fully integrated solution for automating turning operations on Haas ST-10 through ST-35 turning centers,…
EC-400 Horizontal Machining Center
The new EC-400 horizontal machining center from Haas Automation Inc. is faster, more rigid, has a larger work cube and offers more tool capacity than its predecessor. When equipped with the available integrated, 6-station pallet pool and 100+1 side-mount toolchanger, the new EC-400 brings true “lights out” machining capability to small- and medium…
GM-2-5AX 5-Axis Gantry Mill
Many industries today, such as aerospace and automotive design, are turning to 5-axis machining to speed manufacturing processes and increase accuracy. The ability to machine complex shapes, undercuts, and difficult angles in a single setup reduces tooling costs and labor time, resulting in a better cost per part.
HRT1000 and HRT100 Rotary Tables
Rotary tables are ideal for machining multiple sides of a part in a single setup or for machining many parts on a multiple-sided fixture. But handling very large or very small parts can prove challenging without the correct size rotary. The HRT1000 and HRT100 rotary tables from Haas Automation Inc. cover both ends of the size spectrum, providing…
Redesigned DT and DM Series Drill/Tap/Mill Centers
Haas Automation’s popular DT and DM Series Drill/Tap/Mill Centers have been completely redesigned from the castings up to provide more performance and reliability than ever before, with better chip flow, more visibility into the machines, and easier access to parts and fixturing. And best of all, they’re now less expensive.
TRT160 Tilting Rotary Table
Five-axis machining is a powerful tool for reducing setup times and increasing accuracy on complex parts. But investing in a 5-axis machine tool may not be in the budget, especially for smaller shops. The all-new TRT160 tilting rotary table from Haas Automation not only puts 5-axis capabilities well within reach of the average job shop, but its…
UMC-1000SS 5-Axis Universal Machining Center
Haas Automation expands its line of affordable, 5-axis universal machining centers with the UMC-1000SS, a larger-travel, super-speed UMC that offers high performance and speed for 5-sided (3+2) machining and simultaneous 5-axis machining.
Mini Mill-EDU Vertical Milling Machine
Whether you're starting a new engineering program or upgrading an existing one, the Haas Mini Mill is the ideal learning tool. Now available in a school edition, this machine is bundled with educator and student tools that provide real-world machine shop experience within the classroom.
CL-1 Ultracompact CNC Chucker Lathe
The CL-1 from Haas Automation Inc. is an ultracompact CNC chucker lathe that comes standard with an 8-station automatic turret, making it ideal for producing small, precision parts, such as those found in the communications, aerospace, medical and dental industries.
CM-1 Compact Mill
Small parts manufacturing can pose significant machining challenges for the average job shop. Tiny holes, minute features, extreme accuracies and fine surface finishes may prove difficult for larger CNC machines. Haas Automation’s new CM-1 compact mill is a small-footprint, high-accuracy solution for the production and prototyping of small, high-…
Next Generation Control
Haas Automation’s Next Generation Control (NGC) is the latest evolution of a user-friendly CNC. It reportedly features a significantly improved user interface, more consistent and intuitive navigation and vastly improved connectivity.
TR200Y Dual-Axis Trunnion Rotary Table
Five-axis machining is a powerful tool for reducing setup time and increasing accuracy for complex parts. But investing in a 5-axis machine tool can be prohibitively expensive, especially for smaller shops. The new TR200Y dual-axis trunnion rotary table from Haas Automation puts 5-axis capabilities well within reach of the average job shop, and…
TRT70 Dual-Axis Rotary Table
The TRT70 dual-axis rotary table from Haas Automation delivers high-speed and accurate positioning for 3+2 and full 5-axis machining of small, complex parts – like those found in the medical, dental, and jewelry industries. The unit’s ultracompact size and light weight reportedly make the TRT70 the perfect dual-axis solution for even the smallest…
UMC-750P Universal 5-Axis Machining Centers
The new UMC-750P from Haas Automation Inc. is the latest addition to the company’s lineup of 5-axis universal machining centers. The P designation stands for profiling and porting, and that’s exactly what this machine is designed to do.
DT-2 and DM-2 machining centers
Haas Automation recently expanded its drill, tap and mill product line with a pair of high-speed, lean-style machining centers—the DT-2 and DM-2—that reportedly provide the same high acceleration rates, fast axis speeds and short tool change times as their smaller brethren. Yet, the new machines offer an additional 8" (203mm) of X-axis travel…
DT-1 Drill/Tap Center
The DT-1 Drill/Tap center from Haas Automation Inc., is now available with a 20,000-rpm inline direct-drive spindle, giving customers the ability to run higher feed rates for small tools and high-speed machining operations.
Haas Bar Feeder
When Haas Automation introduced the Servo Bar 300 bar feeder in 1999, it was instantly popular, because it was compact, easy to use, and affordable. For 2015, Haas engineers went back to the drawing board to reportedly make bar feeder operations easier, more efficient and faster. The result is the all-new Haas Bar Feeder, which provides a simpler…
HRC210 Rotary Table
Adding a 4th-axis rotary table to a machining center is a proven way to boost productivity, reduce setups, and increase accuracy on multi-op parts. Adding a fast rotary table to a fast machine creates a high-speed package that slashes cycles times even further. The HRC210 from Haas Automation is a high-speed, cam-driven rotary table that provides…
EC-1600 horizontal machining center
As the aerospace, automotive and mold and die industries trend toward monolithic components and large structures, there is a growing need for large-travel machining centers. To accommodate large-volume machining, Haas Automation Inc. has expanded the capacity of its EC-1600 horizontal machining center with an additional 10" of Y-axis travel.
50-Taper EC-1600
s the aerospace, automotive, and mold-and-die industries trend toward monolithic components and large structures, there is a growing need for large-travel machining centers. To accommodate large-volume machining, Haas Automation Inc. has expanded the capacity of its EC-1600 horizontal machining center with an additional 10" of Y-axis…
VF
Haas Automation Inc. redesigned its VF vertical machining center product line to incorporate a wide range of enhancements.

Industry News

+ click to show 2 results

MQL as a complement to flood coolant?

Standing in front of a ma-chining center, waiting for the drilling cycle to end so you can squirt some tapping compound into the holes is a big waste of time. But with challenging materials, such as Hastelloy or Inconel, it’s the only way to avoid a broken tap. Or is it?

Haas Foundation donates $20k to Mississipi community college

Students in Itawamba Community College’s Precision Machining Technology program have a new toolbox, courtesy of a $20,000 grant by the Gene Haas Foundation.

Articles

+ click to show 6 results

A little maintenance equals less downtime

Author:
William Leventon
Column:
Feature Article
Published:

New range for tool change

Author:
William Leventon
Column:
Feature Article
Published:

Robotic automation fills a need

Author:
Craig Zoberis
Column:
Feature Article
Published:

Successfully slotting with aluminum

Author:
John Saunders
Column:
Shop Operations
Published:

Pint-sized precision

Author:
Kip Hanson
Column:
Feature Article
Published:

Overcoming five common challenges when turning

Author:
Evan Jones Thorne
Column:
Feature Article
Published:

Videos

+ click to show 3 results

CNC machine tending with Haas VF-2SS & UR10e

Watch a Cobotics Corner demonstration that helped increase productivity by 43% using a Universal Robots UR10e arm with a Robotiq dual parallel servogripper on a 2018 Haas VF-2SS CNC machine, according to Fusion OEM.

Haas Tip of the Day tackles buildup of stringy chips

Haas Automation's "Tip of the Day" video series tackles the buildup of stringy chips that wrap around tools. "If you’ve ever experienced a rat’s nest of stringy chips wrapped around your tools, this video is for you," according to the video description on the Haas Automation YouTube channel. A Haas representative offers…

Haas Automation covers MQL advantages

The Haas Minimum Quantity Lubrication (MQL) system delivers a steady flow of compressed air and a small quantity of cutting oil directly to the cutting tool or tap, which reduces heat, removes chips and provides lubrication, according to the Haas Automation Inc. website, which features a video report looking at the key features and benefits of MQL.

People & Companies

+ click to show 5 results

Nevada home to latest Haas Automation Inc. milestone

Haas Automation, Inc., is pleased to announce the installation of the 200,000th Haas CNC machine – another major milestone in the company’s history as a machine tool builder.

Renishaw offers technical solutions at Haas technical conference

At the Haas Technical Education Community conference opening on July 24, Gold sponsor Renishaw will present and demonstrate its calibration, probing, and Equator gauging solutions.

Haas Automation Inc. partners with MachiningCloud Inc.

October 9, 2018 - Haas Automation and MachiningCloud jointly announce that they have partnered to offer Haas CNC machine tool product data, including a comprehensive collection of 3D CAD models for the complete line of Haas CNC machines, on the MachiningCloud platform.

Haas Automation Inc. celebrates 30th anniversary of product

This year marks the 30th anniversary of Haas Automation Inc.’s first vertical machining center, the VF-1.

Renishaw sponsors training event at Haas tech center

Renishaw was a gold sponsor at a recent Haas tech center event.