Product News

10/13/2013
Sandvik Coromant introduces a parting off concept for deep grooves and long overhangs.
10/13/2013
HEIDENHAIN has developed the ERM 2200 magnetic rotary encoder series with a 200-micron signal period.
10/13/2013
Primary Cutter LLC, manufacturer of Supermill endmills, is offering a selection of carbide endmills in introductory trial kits at special pricing, allowing new customers to experience their outstanding quality.
10/13/2013
Gibbs and Associates announced the availability of its new 5-Axis Porting option for GibbsCAM.
10/13/2013
Rush Machinery Inc.'s Drill and Tool Grinders have helped thousands lower their holemaking costs through higher precision, faster production, less down time and reduced tool inventory.
10/13/2013
Roughly 1,196 square feet of shelving was consolidated into two Shuttle Vertical Lift Modules (VLMs) from Kardex Remstar occupying only 184 square feet, a 71 percent savings in floor space.
10/13/2013
Stock Drive Products offers miniature pillow block ball bearings from Spyraflo.
10/13/2013
The IF-Profiler, by Alicona, is a non-contact measuring system to measure surface roughness including form.
10/13/2013
Northfield Precision Instrument Corp. introduces the Model 650 Sliding Jaw air chuck.
10/13/2013
The Gi-360 T (tilt) high-speed laser inspection system from General Inspection provides a host of benefits.
10/13/2013
STROTHMANN now also offers quadro turnstiles for the RoundTrack 40 system.
10/13/2013
When compressed air is used to blow off oil, dust and other debris from machined parts on the factory floor, these contaminants become airborne and can affect the health and safety of machine operators. The new LNS SC500 Spray Cabin remedies this problem by providing a compact, mobile enclosure for this process that uses a highly effective air filtration system to remove 99 percent of contaminants.
10/13/2013
HEIDENHAIN has released the newest software for the compact but versatile contouring control, the TNC 320.
09/13/2013
Sandvik Coromant introduces GC4325, a new-generation coated cemented-carbide grade for steel turning.
09/13/2013
Due to increased accuracy demands for angle encoders exceeding an inside diameter of 100mm, HEIDENHAIN has developed the EIB 1500 External Interface Box.
09/13/2013
Guyson Corp. has designed and built a robotic blast machine that precisely repeats programmed surface preparation routines on individual components and automatically processes a tray-full of parts without interruption.
09/13/2013
ESAB's Global Center of Excellence for Gas Apparatus introduces a new line of manual Straight Cutting Torches (SCTs) as part of its new Elite Series of gas apparatus products.
09/13/2013
Fastems FPC is a cost-effective solution to automate horizontal machining centers.
09/13/2013
A new feature from KardexRemstar Inc.'s Power Pick Global software allows users to "purge" materials from inventory that are no longer needed.
09/13/2013
Advanced hard turning, or the use of superhard polycrystalline cubic boron nitride (PCBN) cutting tools for machining hardened ferrous materials like cast irons, is eagerly sought across a number of key manufacturing industries. Hundreds of millions of brakes discs, brake drums, flywheels, and wheel hubs are required annually in motor vehicle, heavy equipment, and other industries, and although superhard tools show promise for turning such tough-to-machine parts, that promise has been stalled due to the tendency of these expensive tools to shatter and break under the extreme forces required. With decades of experience in advanced materials science and tool design, Kennametal is announcing Beyond Shield as the solution (responding to modern challenges in machining cast iron machining) to this situation.