A portable, ID clamping pipe beveler that is now offered with a powerful new variable-speed electric motor for use on-site or in fabrication shops has been introduced by Esco Tool.
A full line of hand-held bevelers that feature extra-rigid blade locking systems and blades incorporating a radical chipbreaker to transfer heat without cutting fluids has been introduced by Esco Tool. Millhog Right Angle Bevelers feature the EscoLock wedge-style blade lock system which has a large clamping surface and double-threaded screw to…
A new pipe beveling tool with an operating range from 4.5” ID to 24” OD that requires only one mandrel and 10 clamps for the entire range of the tool has been introduced by Esco Tool. The Dictator II MILLHOG Pipe Beveler uses one mandrel and a set of three wide clamps that provide six points of contact on the pipe ID, resulting in rigid mounting…
An ID clamping boiler maintenance tool that can bevel and remove membrane simultaneously without cutting oils and no heat affect zone (HAZ) to produce superior welds is available from Esco Tool.
An OD clamping portable beveling tool that is ideal for performing end preps on thin-wall tube where maintaining the integrity of the ID is critical has been introduced by Esco Tool.
An upgraded pipe beveler featuring pneumatic clamping with a new motor and gearing that produces low rpm and high torque to pull a thick chip without cutting fluids has been introduced by Esco Tool.
An easy to use, manual flange facing tool that reconditions damaged raised- and flat-face flanges in the field to eliminate the need to cut and replace them has been introduced by Esco Tool. The Esco FLANGE HOG 110 is a manually operated hand tool that re-faces damaged pipe flanges with a phonographic finish on-site and eliminates the need to cut…
A line of tube expander kits that feature rolling motors with adjustable torque to create a uniform and tight mechanical seal for repairing boilers has been introduced for sale or rent from Esco Tool. Esco MILLHOG Rolling Motor and Tube Expander Kits feature a rolling motor with adjustable torque control to prevent over and under expansion;…
Two alternative portable pipe milling tools for performing welding end preps on pipe and tube from 0.5” I.D. to 3” O.D. with different bores and wall thicknesses are available from Esco Tool.
A water wall boiler tube repair system for biomass boilers that precisely cuts tube panels without a HAZ (heat affect zone) and bevels for welding end preps has been introduced by Esco Tool.
A wide range of cutter blades for their full line of portable pipe beveling machines that pull a thick chip without cutting oils to promote high weld integrity has been introduced by Esco Tool. Esco Millhog cutter blades feature sharp edges and a radical chip breaker that can bevel the pipe OD, flat face and bore the ID sumultaneously without…
A portable pipe milling machine that sets up fast and provides precise, perfectly square bevels on either torched off or rough cut pipe for better weld integrity is available from Esco Tool. The Esco Wart MILLHOG is a portable pipe beveller that sets up fast using a self-centering draw rod assembly which fits into the pipe ID and has a mandrel…
A new, electric portable pipe machining tool that is a powerful alternative to pneumatic tools for end prepping boiler tubes and other pipe fabrication work has been introduced by Esco Tool. The ESCO MILLHOG Mini Electric Pipe Beveling Tool rigidly mounts to the tube or pipe ID and is suitable for end prepping heavy-wall stainless steel pipe and…
A saw and track system for accurately cutting pressure vessels up to 60” in diameter in preparation for hydrostatic testing and complete fabrication is being introduced by Esco Tool. The Esco APS-438 Air Powered Saw and WrapTrack trolley lets operators rapidly cold cut vessels from 6” to 60” in diameter with ±1/16” accuracy to permit better bevels…
A heavy-duty ID clamping pipe milling end prep tool that can J-prep bevel, face and bore all hard pipe alloys in preparation for orbital welding is available from ESCO Tool. The Esco Prepzilla Millhog ID clamping end prep tool is offered with a wide selection of cutting blades, including a J-preparation blade that creates a consistent contoured…
A pneumatic saw and clamp system that eliminates torch cutting and lets users produce clean accurate cuts on thick steel plate fast with no heat affect zone (HAZ) is available from ESCO Tool. ESCO’s APS-438 air-powered saw and Quick-Clamp sets up fast using a 2”-wide steel track and has two wedge-style clamps that attach to steel plate up to 15’…
A portable pipe beveling tool for preparing torched-off or rough cut pipe ends and making them square to help create high-integrity welded pipe joints is available from Esco Tool. The Terminator MILLHOG pipe beveling tool attaches to the ID and features a tracker which compensates for variations in the pipe’s wall thickness to maintain a precision…
A battery-powered, boiler-tube beveling tool that delivers the same power as a pneumatic beveler but is truly cord-free, making it suitable for quick welding end preps is available from Esco Tool. The Tube Weasel Battery MILLHOG is a right-angle drive I.D. clamping welding end prep tool featuring an 850 Watt motor with a proprietary gear reduction…
A full line of tube expanders offered with universal pivoting extensions that easily attach to torque controlled rolling motors for hard to reach tube sheet is being introduced by Esco Tool. Esco Millhog rolling motors and tube xxpanders are air-powered and feature a torque control setting which stalls the tool when it reaches the desired tube…
A pipe milling end prep tool for beveling water wall boiler tubes at biomass processing facilities in preparation for precision welding repairs is being introduced by Esco Tool. The Esco Wart MILLHOG is a boiler tube beveling machine that features a rigid ID clamping system and uses TiN-coated cutter blades to machine carbon steel or highly…
An OD-clamping machine for beveling small heavy wall tube and pipe that adapts to virtually any work environment and is ideal for training welders is being introduced by Esco Tool. The C-Monster MILLHOG can bevel, face and bore simultaneously, and pull a thick chip dry without cutting oils.
A full range of pneumatic saws and pipe machining tools that can cut all types of pipe, regardless of size and material, and prepare them for welding are available from Esco Tool. Esco MILLHOG APS-438 Saws are offered in standard and low radial clearance models with mounting tracks and accessories to cut tube and pipe up to 60” O.D. and 4.75”…
A full line of pneumatic rolling motors and tube expanders for straight-, flare-, long-reach and beaded rolls that prevent over and under expansion are available for sale or rent from Esco Tool.
A water wall boiler maintenance tool that mounts securely to the tube I.D. for removing membrane, cladding, and beveling simultaneously with minimal vibration is available from ESCO Tool.
A new blade holder for the Commander MILLHOG heavy-wall pipe beveling tool that includes a bore blade to create a more uniform I.D. and assure proper pipe end alignment is being introduced by ESCO Tool.
An air-powered saw that can be used in any position to produce perfectly square cuts on water wall boiler tube panels made from highly alloyed tube up to 4-½" O.D. is available from ESCO Tool.
An upgraded O.D. clamping end prep tool that is ideal for beveling, flat facing and J-prepping water wall boilers equipped with small bore heavy-well tubes has been introduced by ESCO Tool.
A patented portable tube fin removal tool that features a new aggressive rack-and-pinion feed mechanism and side ratchet to rapidly peel back HRSG tubes has been introduced by ESCO Tool.
A right angle pipe and boiler tube machining tool has been upgraded with a new air motor which provides more torque at the cutter head and is easy to disassemble and clean is being introduced by ESCO Tool.
A line of pipe beveling tools featuring cutter blades that incorporate a radical chip breaker to draw heat away from the surface and don't need cutting oils is available from ESCO Tool.
A line of welding end prep tools that are now available in battery and electric powered models for machining tube and pipe where air is not available is being introduced by ESCO Tool.
A new bolt seat resurfacing tool that makes sure turbine cover bolts fit properly after repairs, and is suitable for all surfaces subjected to corrosion is being introduced by ESCO Tool.
An upgraded welding end prep tool for machining high temperature, high pressure pipe used on severe-duty offshore piping systems and shale pumping stations is being introduced by ESCO Tool.
A field-proven, right angle drive I.D. clamping pipe milling tool for performing welding end preps anywhere an air hose or electric cord is unavailable is being introduced by ESCO Tool.
A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool.
A new electric O.D. clamping end prep tool for use on both thin-wall and heavy-wall tubes with a high percentage of chrome, especially in high purity applications, is being introduced by ESCO Tool.
A portable pneumatic saw with a pipe trolley system for accurately square cutting ductile iron concrete lined pipe from 6" to 60" in diameter is available from ESCO Tool.
A portable tube fin removal tool that rapidly peels the fin and bevels the tube end in one-step for repairing and replacing tubes in heat recovery steam generators is available from ESCO Tool.
A portable end prep tool for heavy wall stainless steel pipe and difficult-to-machine alloys that pulls a thick chip without cutting oils for producing superior welds is available from ESCO Tool.
A new, patented membrane and overlay removal head that features a long-life cutting edge design and fits several of their MILLHOG beveling end prep tools has been introduced by ESCO Tool.
A new, (patent pending) dual spring hanger that lets users safely maneuver all types of heavy or bulky tools, especially when they need to be jogged into position, is being introduced by ESCO Tool.
A heavy-duty I.D. clamping pipe milling end prep tool now offered with an electric motor for performing heavy-wall preps at metal fabrication shops or on-site is being introduced by ESCO Tool.
A new portable welding end prep tool that features a highly reliable, variable speed 14 Amp electric motor for applications where compressed is not available is being introduced by ESCO Tool.
An air powered saw and track system which reportedly attaches easily to water wall boiler tube sections to produce square cuts that require no further rework is available from ESCO Tool.
An air-powered clamp that speeds attachment to the tube I.D. and releases the clamp ribs instantly after milling, to set up faster and help reduce operator fatigue, is available from ESCO Tool.
A fin tube removal tool that lets an operator rapidly remove up to 4" of fin from a tube O.D. without chipping hammers, grinders, dirt, dust, and excessive strain is available from ESCO Tool.
A pneumatic saw and quick-clamp assembly that lets users cut steel plate up to 2" thick and 15' wide anywhere there is a 90-psi compressed air supply is available from ESCO Tool.
