Product News

The unique TiAlN-Al2O3 multilayer coating system makes the WSP45G both hard and tough, and thus extremely resistant to abrasive wear and high temperatures, with controlled residual stresses and less flank wear, all boosting tool life. A special mechanical post-treatment improves hairline crack performance and protects the cutting edge from micro-spalling. The light gold-colored topcoat of the multilayer system makes it easier to detect wear and thereby improves process reliability. Unused cutting edges are reliably identified, making it possible to utilize the full potential of the indexable insert and further extending tool life.

Designed for robustness, reliability, affordability and ease of use, Deltron, is a shop floor hardened non-Cartesian CMM with an innovative delta robotic mechanism, reknown for repeatable motion, fast acceleration and a high level of measurement accuracy. The delta mechanism on Deltron operates with a maximum vector speed of 500mm/sec and a maximum vector acceleration of 750mm/sec2.

Helix CAD models are now available for download in Dorner’s D-Tools, Dorner’s online conveyor configurator. Using D-Tools, project managers can now design a FlexMove Helix conveyor to fit their exact application in a matter of minutes.The Helix Conveyor’s incline/decline angle can be shallow for accumulation applications, or steep when space is limited.

Dental tool grinding on the 5-axis GrindSmart Nano5 grinding machine offers exceptional flexibility in comparison to conventional single-purpose grinders. With its 5 fully interpo­lating CNC axes and a pick-and-place automatic tool loader, the machine can easily be adapted for any type of dental cutting instrument, both for short and long runs. 

AH9130, consisting of a PVD coating layer optimized for drilling applications with a dedicated carbide substrate, is the latest insert grade specifically developed to provide significant tool life improvements and more predictable wear patterns in hole making applications of ISO P (steel), ISO M (stainless steel), and ISO K (cast iron). 17 SMP-style inserts have been released in the latest grade, covering diameters from 20.0 mm to 35.0 mm (.787″ to 1.378″). In addition to Tungaloy’s versatile grade AH725 which covers most ISO materials, AH9130 provides DrillForce-Meister with added process security and tool life improvements in ISO P, M, and K applications. 

The e-spool flex 2.0 is igus’ version of a cable drum without a slip ring. The cable is safely routed through a feed-through to ensure that it is always properly wound. Cable diameters of 5-15 millimeters can be used. The unit can be installed on the floor, ceiling, or wall and safely guides media power, data, or air in one system. The space-saving design includes a locking mechanism on the cable, and is adaptable to technological developments by simply replacing the used cable. The design is also cost-effective in case of repair as it allows for the replacement of individual components.

With AOT onboard, a highly-intuitive graphical user interface provides step-by-step instructions that guide operators through the process of selecting material type, tooling, processes, and cutting motions for the desired part design. From there, the system then simulates the cutting process in a 3D graphical view before exporting the NC (numeric control) program. Using AOT to create custom programs allows shops to maximize their machine tool’s full potential, while eliminating concern regarding correct program syntax.

When paired with an EIB 5211 sensor box, these new RCN encoders will transfer the temperature of the encoder and a direct-drive motor to the control in use.  This gives the user the ability to push the system to its thermal load limits which in turn increases production and cost efficiency.

TungBore-Mini is a multifunctional drilling and turning tool line that integrates the capabilities of drilling, OD, and ID turning tools. Its unique XOMU insert features an innovative geometry incorporating a large inclination angle on the cutting edge that produces light cutting, compared with standard ISO positive turning inserts that are typically used for ID turning or boring operations. In addition, TungBore-Mini’s insert and pocket have a dovetail interlocking design providing better insert clamping and stability than standard screw-down insert clamping, ensuring process security during various applications.

The MarForm MMQ 500 is designed for speed. Its Z-axis vertical column allows movements with up to 100 mm/s—more than three times faster than conventional form measuring devices—for minimized cycle times. The newly developed automatic CNC centering and tilting table is a key factor in speeding up the total cycle time as it enables faster alignment than comparable models, thus increasing efficiency and productivity up to 75% faster than the market standard. This new centering and tilting table also features a high load-bearing capacity to enable the measurement of heavy workpieces, up to a mass of 80 kg (176 lbs.)

The first set of additions includes a choice of six different pneumatic subplates, each featuring pre-installed low pressure pneumatic clamping modules. The second set of additions is comprised of aluminum or steel fixture plates with pre-installed pull-studs.

XSYTIN®-360 end mills have shown the highest material removal rates and resulted in increased productivity on a wide range of materials. These end mills have proven to be extremely effective when machining a variety of different materials including high-temperature alloys, 3D-printed sintered high-temperature alloys, hardened steels, ductile cast irons, and compacted graphite iron (CGI). In hardened steels specifically, the tool life of XSYTIN®-360 end mills has proven to be equal to high-performance carbide end mills when run at high-end speeds (11,460 RPM), while also removing over 73 cubic inches (over 1200 cubic cm) of material.

The CS2 Series force testers can perform the most commonly used tests within most industries from basic static force testing to multistage testing, cyclic testing and more at a fraction of the cost of an advanced materials tester. The CS2 Series force testers feature a large working area of up to 180 mm that allows the operator flexibility to not only test the product but its packaging as well with a simple change of grips.

The family of vises is ideal for applications requiring multiple vises to be mounted parallel to each other. Versatile, the vises can be mounted on their base or bottom or vertically positioned on their end. The vises are equipped with Palmgren’s Dual Force so as to deliver workholding efficiencies by providing the strength and rigidity to hold parts securely and accurately.

The stable cutting edge enables feed rates in the range of f = 0.25-0.4 mm/rev, during grooving and parting-off, which results in reduced machining time across multiple operations. Reliable chip evacuation and control is ensured by a special chip formation. High feed rates require a stable machine  when grooving and parting-off, as well as secure clamping of the workpiece. Starting from a feed rate of 0.3 mm/rev (0.012”/rev), HORN recommends reducing the infeed for the first 3—4 mm (0.118”- 0.157”) during grooving and parting-off.

The FreeBSD system – and thus also TwinCAT/BSD – supports ARM CPUs up to Intel® Xeon® processors, providing a scalable platform from small embedded controllers to high-performance IPCs. With this scalable new solution, Beckhoff presents a new operating system that combines the advantages of Windows CE – low cost and small footprint – with the numerous features of large Windows operating systems. Therefore, TwinCAT/BSD is also an alternative to Windows 7 or 10 in many applications.

When parts are more intricate or bulkier than flat sheets, then the three axis table is recommended. It is suitable for checking laser and waterjet cut parts, sheet metal parts with many features and parts that are bent and formed.  The three axis table includes flexible metrology software, sealed Heidenhain encoders, low-maintenance linear bearings and a versatile Renishaw touch probe. Furthermore, it has the ability to integrate with SPC software for quality tracking and reporting and reduces operator error. As with the single axis table, it offers long-term durability and simple operation. 

Featuring a powerful, 30-watt fiber laser and a large, 100 x 100 mm marking window, MobiLase delivers fast and durable laser markings on nearly any material ranging from plastics to steel to precious metals, among many others. The 7-lb. handheld applicator is equipped with a trigger to start marking plus two bracket options for ease of marking various part shapes.  These brackets also enable rapid focusing from a consistent, repeatable distance, which is further optimized by the laser pointer simulator. 

Suitable for use on machines with limited power, the combination of new inserts and cutter delivers high metal removal rates with low cutting force and reduced chatter. It features positive axial and radial face angles for good cutting action and directing chips away from the work-piece. Available in a variety of diameters, the S450E performs well with fragile work pieces, unstable fixturing or preventing stainless steel work hardening.

The AVR-FOV 0.14X automated part programs deliver accurate results to the micron level in a matter of seconds with “Go/ No-Go” tolerance zones, and data are provided in one easy-to-interpret report. These features allow metrology users in manufacturing facilities or QC labs to produce accurate, fast, and repeatable results.