The unique PVD coating that is standard on all Greenleaf-360 end mills provides added productivity and performance. The coating offers a very low coefficient of friction with an extremely high service temperature range. This combination results in high wear resistance and allows for higher speed capabilities, especially in heat-resistant alloys.
Utilizing an innovative PVD coating combined with a proprietary sub-micron substrate, G-9610 provides added productivity for turning titanium-based alloys. The smooth and lubricious coating is wear-resistant and chemically-stable, which helps to protect the heat-resistant substrate and allows for higher speeds and extended tool life in continuous…
XSYTIN®-360 end mills have shown the highest material removal rates and resulted in increased productivity on a wide range of materials. These end mills have proven to be extremely effective when machining a variety of different materials including high-temperature alloys, 3D-printed sintered high-temperature alloys, hardened steels, ductile cast…
The Greenleaf Quick-Change Toolholders conform to ISO 26623, utilize standard components, and are designed to maximize tool life in carbide and ceramic turning applications.
Greenleaf Corp.’s XSYTIN-1 is a phase-toughened ceramic insert grade that resists wear and thermal shock. It is for milling, turning and grooving heat-resistant superalloys, cast iron, nodular iron, ductile iron, steel and stainless steel at extreme feed rates and high cutting speeds, according to the company. It is suitable for interrupted cuts,…
Greenleaf Corp. says its Index-O-Cut high-performance milling system is suitable for machining all materials because of its high-shear cutting action and a 45° lead angle on the octagon-style insert.
As part of its multi-year Global Productivity Initiative, Greenleaf Corp. has announced the introduction of a new Silicon Nitride ceramic insert grade, GSN-100.
Martin Dillaman, global manager at Greenleaf Corp., presents innovative tooling solutions for hardened steel. Key highlights include the WG-600 ceramic insert, designed for high-speed, coolant-free operations, and the versatile Excelerator milling tools. Live demonstrations underscore the efficiency of ceramic inserts, cutting process times from…
Kevin McCall, senior sales and engineer with Greenleaf Corporation, offers a quick guided tour of the company's ceramic tool cutting demonstration during Westec 2023 held in Long Beach, California, in November.
The Greenleaf Corp. ran a demonstration at its booth during Eastec 2023 showcasing the capabilities of a range of tool, including indexable and solid options. Included in the demo were Greenleaf's Ring Max tool and its XSYTIN-1 phase-toughened ceramic insert grade.
Martin Dillaman, global manager of engineering/applications for Greenleaf Corp., recaps and takes questions regarding "Making the Grade," a feature article published in the April 2023 issue of Cutting Tool Engineering magazine that discusses how the use of the right carbide inserts helps overcome any issues that might arise when rough…
Greenleaf’s XSYTIN®-360 ceramic end mills combine the company’s phase-toughened XSYTIN®-1 substrate with a unique cutting geometry that offers 10 times higher productivity and tremendous cost savings.
Greenleaf’s XSYTIN®-360 ceramic end mills combine Greenleaf’s phase-toughened XSYTIN®-1 substrate with a unique cutting geometry that offers ten times higher productivity and tremendous cost savings.
Cutting Tool Engineering Owner/Publisher Dennis Spaeth walked the aisles at EASTEC 2019 with his trusty camera in hand. Take a look at some of the highlights captured along the way.
Travis Biggs, applications engineer, technical service, for Greenleaf Corp., offers the nitty gritty on the tools used in this 1 minute and 40 second video featuring a 5/8" ball nose tool followed by the company's Extreme Feed Mill 1" dia., 4-tooth cutting tool.
Greenleaf Corp. introduced its WG-300 ceramic composite tool material about 25 years ago. The ceramic matrix is reinforced with silicon-carbide "whiskers” that boost toughness. Initially applied in the relatively constant cutting conditions of turning operations, the composite tools provided a significant increase in…
On Nov. 3, 2016, Greenleaf Corp. officially launched its phase-toughened ceramic insert grade XSYTIN-1 with a press event at the toolmaker’s global headquarters in Saegertown, Pa.
Greenleaf Corporation, a leading developer of cutting tool technology and ceramic materials, has appointed Jan Andersson to the position of Global Manager, Tech Team and Marketing. Andersson comes to Greenleaf from Kennametal Corporation and Sandvik Coromant where he held various positions within Product Management, Marketing, Sales and R&D.
