Home

Mikron Tool

Products

+ click to show 16 results
CrazyMill Cool P&S Toric Version Milling Cutter
A unique tool for numerous applications: Milling of holes, ramps, pockets, grooves and sides. Seemingly without resistance, the milling cutter plunges into the materials that are difficult to machine. It cuts powerfully with high precision, stability and excellent cutting parameters, even into the solid - effortlessly. Behind this perfection is a…
Cutting Tools with Diameters in Fractional Inches
The need for such dimensions is increasing that’s why Mikron Tool has introduced a fractional inches diameter range for a large assortment of its drilling and milling cutter families. The selection is focused on materials such as stainless steel, titanium and superalloys. The range includes micro drills and micro mills of .016” and extends up to…
CrazyMill Cool P&S
The new version of the solid carbide plunge mill is based on the same technology as the short version, transferred directly to the new one. Now it is possible to plunge perpendicularly into the material and reach the maximum milling depth of 5 x d in a few steps. Despite its length, the milling cutter is extremely stable and at the same time…
Hexalobe Tools for Machining Medical Screws
A drill, a milling cutter, an ultimate machining strategy with perfectly tuned parameters; this is needed, when machining medical screws made from titanium or stainless steels. Mikron Tool developed a turnkey solution, which simultaneously does the machining of hex lobular bone screws (better known as Torx) 50% faster, guaranteeing also a high…
CrazyDrill Cool SST-Inox
Small, deep and fast, these are the characteristics of the small drill CrazyDrill Cool SST-Inox. Due to internal coolant ducts, innovative geometry and innovative coating, the machining of stainless steels, nickel based super alloys and CrCo-alloys has become significantly simpler and process stable. This goes also for small diameters, as well as…
CrazyMill Cool Ball Z4 Finishing Milling Cutter
The CrazyMill Cool products have been developed by the Swiss tool manufacturer Mikron Tool for milling in small dimensions with high performance and quality. Now a new “family member” has been added. It is a four-teeth finishing milling cutter with shank integrated cooling, available in the diameter range of 1 to 8 mm und for milling depths of up…
CrazyMill Cool Ball Endmill
Fast and reliable milling of stainless steel, titanium, heat-resistant alloys or even CrC alloys is a huge challenge for many machine operators and tool manufacturers. To overcome the challenge, the Swiss cutting tool manufacturer Mikron Tool launched CrazyMill Cool, a product family that promises a valuable solution in a diameter range from 0.3…
DC Swiss Circular Thread Milling Cutter
Drilling and threading with the same tool? Even in working depth up to 3 diameters? Yes it is possible, thanks to the new DC Swiss circular thread milling cutter from Mikron Tools with internal coolant starting from 3mm (0.12”).
Mikron microtools
Mikron Corp. Monroe provides cutting tools from 0.004" (0.1mm) to 0.25" (6.0mm) in diameter for machining stainless steel, titanium, chrome-cobalt and high-temperature alloys. These include the CrazyDrill Twicenter with through-coolant ducts for centering, the CrazyMill Cool through-coolant milling cutter, the CrazyMill Chamfer deburring…
DC Swiss Tools
Mikron Corp. Monroe, which specializes in high-precision cutting tools in small and medium-sized diameter ranges, expands its offer by adding a new product family. Another Swiss quality product, tapping and threading tools from the DC Swiss, is now available directly from inventory at Mikron Corp. Monroe in Connecticut.
CrazyMill Cool
Mikron Tool SA Agno says it has achieved a quantum leap in milling of stainless steel, titanium, chrome-cobalt alloys and superalloys with the CrazyMill Cool.
CrazyDrill Flex
One year ago, Mikron Tool introduced flexible solid carbide drills and earned respect from the producers of deep hole drills, because these drills, starting at 0.1mm diameter, achieved drilling depths up to 30 x D. Today, the Swiss tool producer takes another step forward and expands their drilling program of CrazyDrill Flex. We are now talking…
Multistar NX-24 Rotary Machining System
The three main factors which appeal to users of the new MIKRON Multistar NX-24 Rotary Machining System from an economical perspective are outstanding productivity, full flexibility and highest precision.
CrazyDrill
Mikron Corp. Monroe offers the CrazyDrill drill with cutting depths of 15, 20 and 30 diameters starting from a 1mm diameter and 40 diameters starting from a 2mm diameter.
Mikron Tool offers engineered specials
Mikron Corp. Monroe engineers special tools, which are often combination tools for several different machining operations.
Mikron back chamfer milling tool
A milling cutter from Mikron Corp. Monroe is for back chamfer milling of small contours and bores, starting from 0.4mm in diameter. The company recommends conventional milling in two steps to avoid secondary burrs.

Industry News

+ click to show 2 results

Toolmakers tout nonround coolant orifices

A circular shape provides multiple benefits in the machining world. For example, round inserts are stronger than inserts with any other shape. However, when it comes to coolant channels in cutting tools and toolholders, channels that don’t have circular cross sections can enhance operations.

An inconspicuous medical tool stems bleeding with precision

The medical technology poses major challenges for machinists.

Articles

+ click to show 6 results

In the groove

Author:
William Leventon
Column:
Feature Article
Published:

Know how to scale down

Author:
Alan Richter
Column:
Feature Article
Published:

The essentials of manufacturing microtools

Author:
Kip Hanson
Column:
Feature Article
Published:

Growing demand for microparts challenges suppliers, users

Author:
Kip Hanson
Column:
Feature Article
Published:

Joint Forces

Author:
Alan Richter
Column:
Feature Article
Published:

Why so cross?

Author:
Kip Hanson
Column:
Feature Article
Published:

Sponsored Content

Videos

+ click to show 11 results

Mikron Tool IMTS 2024 Booth Visit

Welcome to the Mikron Tool booth at IMTS 2024! In this demo, we showcase NS Tool's advanced surface finishing on a bone plate. Join Vince Hensel as he guides you through the latest innovations. Watch to learn more about precision machining techniques and the future of surface finishing.

The Right Drill for Each Type of Titanium

Not all titanium is alike. Depending on whether it is pure titanium or alloyed titanium, the chip removing process behavior differs. For these challenges, Mikron Tool has developed drills tailored to specific titanium grades that can machine titanium safely — with higher cutting performance results, longer tool lives and excellent hole quality.…

CTE Booth Visit with MIKRON Tool @ Eastec

CTE Publisher Dennis Spaeth asks MIKRON Tool's Clive Komlenic, sales director, East, about the company's new micro milling tool, the CrazyMill Cool Micro. The new cutter is said to answer their customer's desire for a micro tool that displayed a lot of the same characteristics as MIKRON's larger mills that start at 1 mm.

IMTS 2022 Booth Visit with Mikron Tool

Clive Komlenic, Mikron Tool’s sales director, East, showcases the company’ CrazyDrill Titanium PTC for pure titanium and the CrazyDrill Titanium ATC for alloyed titanium.

Roughing and finishing milling cutters from Mikron

Mikron Tool expands the CrazyMill Cool P&S milling cutter family developed for roughing and finishing operations with the addition of a toric (corner radius) version.

EASTEC 2021 Booth Visit with Mikron Tool

For Cutting Tool Engineering's EASTEC 2021 booth visit with Mikron Tool, Regional Sales Manager Clive Komlenic talks about the company's new CrazyMill Cool Plunge & Slot square and corner radius mill as well as its new line of small diameter micro mills (0.2 to 0.9 mm three-flute and 0.4 to 0.9 mm four-flute).

Mikron Tool Demos CrazyDrill Flex

The Flex drills are available in steps of one hundredth millimeter for drilling depths of 50 x D, as well as the "shorter" lengths of 20 x D and 30 x D.

Highlights from EASTEC 2019

Cutting Tool Engineering Owner/Publisher Dennis Spaeth walked the aisles at EASTEC 2019 with his trusty camera in hand. Take a look at some of the highlights captured along the way.

CTE+ Product Demo: CrazyDrill from Mikron Corp. Monroe

Using its Crazy Drill Cool SST-Inox, Mikron Corp. Monroe demonstrates fast drilling in stainless steel, heat-resistant superalloys and more.

Mikron debuts dual-spindle, 5-axis, flexible production center

Mikron Corp. Monroe, which recently unveiled its Mikron XT-one dual-spindle, 5-axis, flexible production center, offers an overview of the new machine in this 3-minute video report produced by the Monroe, Conn.-based company.

MIKRON features Crazydrill Crosspilot solid carbide drills

The CRAZYDRILL Crosspilot is one of the very successful tools in the CRAZYDRILL line of high precision, high performance, solid carbide drills of Mikron. It is used to drill inclined holes and does the traditional operation of Flat Milling, NC Spot Drilling and the actual drilling with a twist drill in two steps instead of three.

People & Companies

+ click to show 5 results

Mikron Tool launches CrazyService products

Challenging customer projects have a long tradition at Mikron Tool. In recent years, the number of inquiries from the machining industry from a variety of areas has increased sharply, always looking for the most suitable drills and milling cutters or more efficient machining strategies.

'Crazy' good changes at Mikron Tool

Mikron Tool recently announced a change in leadership with Markus Schnyder, the long-standing chief operating officer of Mikron Switzerland AG, Division Tool, handing the reins to Elio Lupica to continue the company's exceptional market performance in recent years. In the following Q&A, Lupica shares some optimistic views for what comes…

Mikron Tool builds new production facility in Switzerland

Mikron Tool has constructed a 1,000-square-meter, two-story production facility.

Mikron Tool’s ‘crazy’ IMTS innovations

Eagerly awaited, IMTS is finally opening its doors again after a forced break due to the pandemic. And during the break, Mikron Tool’s R&D department has been busy developing better ways to machine demanding materials in the micron range. Some of them are "crazy."

Mikron leader steps down from management role

After 24 years at the forefront of Mikron Tool, Markus Schnyder is retiring from his post but will still be available to the company in a consulting function. In October, Schnyder, head of the Swiss tool specialist, handed over management of the company to Elio Lupica.