With practical touch control panels, the new digital comparators offer maximum measuring reliability even in harsh workshop environments. A light tap on the touchscreen is sufficient to safely operate the digital comparators with most commercially available gloves. This eliminates the possibility of measurement errors by accidental adjustment or deformation of the comparator. The full-surface glass display also offers protection against liquids and dirt, which cannot penetrate the sealed housing.
The wireless RCD from Kistler has a 10 kHz sampling rate that allows to capture highly dynamic foot-prints of the measurement in applications with up to 16 000 RPM. Overall, piezoelectric sensors ensure more accurate measurements than other technologies, such as strain-gauge sensors, which have significant limitations especially when measuring small forces and high dynamic processes. Highly accurate measurements are not only important for research but also for production monitoring. The piezoelectric measurement technology can capture very small changes and deviations before they have a significant effect on product quality.
A patent-pending, highly textured, multi-layered MT-TiCN layer increases toughness and reduces flank face wear, resulting in lower cost per cutting edge. The inserts’ highly textured Al2O3 layer also minimizes crater wear, and the gold-colored top layer improves wear detection. The gradient carbide substrate boosts wear resistance and toughness. In addition, Walter provides its signature multi-stage post-treatment. This produces an unusually smooth rake face, reducing friction and also increasing toughness.
The 11-inch bench engine lathe and gear head mill is able to handle a wide range of turning, milling and drilling operations typically found on much larger machinery. Constructed from heavy cast iron, its smooth power transmission with precision thrust and ball bearings in the head stock and spindles are designed to provide years of trouble-free operation.
VpCI(r)-395 is Cortec's most durable anticorrosion primer. It not only promotes good surface adhesion between the metal and topcoats, but it also has greater strength as a 2K (two-component) primer. The extra effort that goes into mixing two parts together at the jobsite translates into greater durability because it allows crosslinking, i.e., greater chemical bonding, between the active ingredients in the primer.
KYHK15B provides excellent edge stability, high chipping resistance, and a PVD gold coating makes wear progression identification very easy. From smooth and varying depths of cut to heavy depths of cut, KYHK15B can be an economic alternative to PcBN inserts.
The multifunctional turning-boring-milling center is designed for complete machining of complex chuck and shaft parts up to 670 mm swing over bed. Turning, milling, drilling, hobbing, shaping, gun drilling as well as ID machining can be performed under any angle of the tool. The interpolation of up to 5 axes makes machining of any geometrical profile possible. Large safety windows provide the best possible overview of the working area.
This grade is now capable of longer tool life, greater reliability, and approximately 30 percent greater performance in stainless steels (ISO M) and heat-resistant super alloys (ISO S), and up to 75 percent greater performance in steels (ISO P) than comparable grades. With the launch phase now complete, the PVD grade WSP45G Tiger·tec® Gold can be used universally in all standard Walter milling cutters.
Users can machine this collet attachment to adapt it to match the internal contour of the workpiece they are clamping. However, what makes this new exhibit from AMF so special is that no through holes are needed in the workpiece to achieve safe internal clamping. With mechanical lateral actuation, workpieces with a blind hole can also be clamped securely and without distortion.
With IMCO Software’s Plan360 software, manufacturers can integrate a variety of data sources and use combinations of data points to create an unlimited number of planning horizons. The PLan360 Software also provides a Best Fit model among 20 predicted models simplifying the analysis and removing the opportunity for human error.
Bluetooth technology along with an IBT interface box in the droPWR system allows connection to multiple machine configurations in one tablet including for milling, turning, and grinding machines with up to six axes. Designed to be simple and functional, this tablet DRO can be moved and used with various machines, making it perfect for many production environments such as small shops and students in shop class.
The unit control of the Connect.series range, with its compact size, has a large 10’’ touch screen in tempered glass and pairs in just a few seconds to the marking head thanks to the RFID technology. It can connect to the network and exchange data with the information system (ERP, MES). Its intuitive software developped by Technomark make marking possible within 3 clicks.
Turn-Assist features an open-floor setup and area sensors to maximize operator safety and accessibility, while a pre-programmable FANUC robot loads blanks and unloads finished parts from the stocking table. Options are available that allows the robot to process shafts, rotate parts, and interface with a bar-feeder.
With Solidline CAMculator, companies can reduce calculation time and calculate costing of components based on the actual NC code of a part. Because it uses data from the CAM model, companies can achieve repeat accuracy and company-wide consistency.
FixRMill uses round inserts for machining dies and molds, especially complex male-female main parts such as cavities and projections. The round inserts feature anti-rotation notches on the insert clearance side and matching locations on the pocket seats. These notches not only prevent the insert from rotating under heavy load but also help the operator to get a true, distinct index every time he/she goes for a new edge, allowing all of the insert to be utilized.
The blue laser, paired with an intelligent measuring system, provides high-precision measurement of various tool parameters on cylindrical tools with diameters from one to 52 mm. Since it does not contact the surface, the Laser Contour Check avoids possible damage to cutting edges or measuring errors that can occur due to wear on the probe tip during tactile measurements.
An advanced touchscreen HMI enables automatic, partial changeovers in 15 seconds or less, and one minute or less for complete changeovers. Additionally, the user-friendly HMI uses QR codes for easy servicing, forecasting tools and a 500-part setup library. The bar feeder’s newly designed main cover lifts upward for easier access.
Piezoelectric materials convert electrical energy into mechanical energy and vice versa; the so-called inverse piezo effect is harnessed for the generation of oscillation and precision motion. For ultrasonic applications that require high bandwidth, hemispheres and hollow spheres are currently available with an outside diameter range from 2 – 100mm with wall thickness as small as 0.2mm. Uses for electro-ceramic spherical transducers include medical high-intensity focused ultrasound (HIFU), therapeutic ultrasound, hydrophones, and sonar transducers.
One of the primary benefits of vibratory feeders in the nut processing industry is the simple and clean construction of the feeder tray. The trays can be easily and quickly wiped down or washed out for product changeover or sanitation protocol.
VpCI®-418 LM can be used on a variety of metals (carbon steel, stainless steel, cast iron, galvanized steel, brass [30% Zn], copper) and may be used at different dosages for light, medium, or heavy-duty cleaning.
