Product News

Built using SHINE technology (Systematic High-Intelligence Noise Elimination), the RS6 laser scanner always delivers full scanning performance, even on the most challenging surfaces. Whether it’s a glossy black plastic automotive body part or a molded carbon-fiber component, this scanner scans without any reduction in quality or productivity. Furthermore, SHINE allows users to scan 99% of parts without touching the scanner exposure.

Internal tests show the new GARANT Master Steel DEEP achieved impressive results in comparison to its predecessor and products from competitors: up to 30 percent higher metal removal rate, up to 70 percent higher process reliability and three times longer tool life.

The CW100 grade expansion encompasses four new round insert formats with two geometries, E-01020 and T-01020, and four grooving insert geometries with widths of 3.175 mm (0.125”), 6.35 mm (0.25”) and 7.925 mm (0.312”). An aluminium-oxide-based grade with silicon-carbide whiskers (Al2O3-SiC), the SecomaxTM CW100 grade not only boosts machining speeds in advanced HRSA materials, but it ensures stable and predictable tool life for the lowest possible cost per part thanks to the silicon-carbide whiskers, which use optimized micro geometries for the utmost in ceramic wear resistance and strength.

The paper offers effective protection to ferrous and nonferrous metals, eliminating the need to stock a variety of papers for different metal types. All that is needed is to wrap items in the paper and fold the edges together, using adhesive tape as needed to hold paper in place. The VpCI® coating on the paper vaporizes, reaching all metal surfaces within the package to provide complete corrosion protection with a very thin, very effective VpCI® layer that does not alter product appearance or require removal before further finishing or use. Effective protection is available on both sides of the paper to eliminate packaging guesswork.

With 360 degree rotation range and 20N load capacity, the RS-40 V7 stage boasts high angular velocity of 20°/sec and minimum incremental motion and repeatability of 87 µrad. The 110, M-111 and M-112 vacuum linear stage series provide travel ranges of 5, 15 and 25mm and are suitable for vacuum up to 10-6 hPa.

This Grieve inert atmosphere oven features 12” insulated walls, all interior seams welded gas-tight, an air jacket on the inner oven for cooling, 16” high integral oven stand, 16-gauge 304 stainless steel interior and enamel-painted aluminized steel exterior.  The oven is reinforced for 2000 lb. loads, allowing the customer’s part rack to sit on the oven work space floor.  

DeepTri-Drill is designed to provide productivity and application security for drilling deep holes on standard machining centers and CNC boring machines, while ensuring easy tool management by eliminating the need for regrinding. The insert features chip splitters that allows effective chip evacuations enabling extremely high feed rates during deep hole drilling in various materials.

Glebar’s automatic dresser is available with manual or motorized quill advancement. With motorized quill advancement, it is possible to have a canned dress cycle. Operators can preprogram the frequency of the dress to run after a set number of cycles or time. This allows them to run multiple machines at once increasing their efficiency.

The OMNIedge network sets up automatically and sensors are simply installed on existing components for convenient and easy remote monitoring of operating conditions. Data is securely collected through a dedicated closed IoT networkfor analysis and to provide alerts. By monitoring and predicting damage and lubrication status, the OMNIedge prevents production delays caused by unexpected machine downtime and enables inventory management. 

For automation products such as machine tools, a digital twin is a virtual model that uses simulation, real-time data acquisition/analysis and machine learning techniques to allow full evaluation of a machine’s dynamic performance before constructing a physical prototype. The same technology can also be employed for customer presentations, virtual commissioning and operator training purposes – and all well before the actual machine itself has even been built.

With the highly dynamic, EtherCAT-based AX8000 servo system, new setpoint values can transfer every 62.5 μs from the motion controller in the Industrial PC to the servo drive, along with μs motor current scans. Comparable control systems usually operate with a cycle time of only 1 ms. Now the AX8000 firmware also supports oversampling technology, which is well known from Beckhoff EtherCAT I/O devices. This feature enables multiple samples of process data within a communication cycle with an oversampling factor of up to 128 and the transfer of all data in an array via EtherCAT.

With this collaboration, Mastercam users can download both inch and metric SGS round solid carbide cutting tool libraries from the Mastercam Tech Exchange. The native Mastercam 3D tool databases are fully compatible with Mastercam 2020 and subsequent releases. These offer the latest KSPT innovations and SGS product introductions, including their latest Z-Carb HPR roughing line and H-Carb end mills for Dynamic Milling.

Seco Assistant’s machining calculator gives you turning, milling and holemaking data for any brand including feeds, speeds and material removal rate. The Tool Comparison function gives you Seco tool recommendations and alternatives to other manufacturer’s inserts, while the Suggest function helps you find the right tooling option and cutting strategies for specific jobs.

The Gear Calculator App works online and offline, it runs on pcs/notebooks as well on mobile devices with Android and iOS. The App must be connected online to install future updates. Please note that you will need a current browser/version to view the Gear Calculator App. When starting the App for the first time it is necessary to register and log into “MyGleason” (for both the PC/notebook version as well as the Mobile App).

The ImageIR® 8300 hs extends this series with a new generation of high-speed infrared cameras. Combining the image format of (640 × 512) IR pixels with the exceptionally high frame rate of 1,004 Hz sets new standards. It allows thermographic images of excellent quality, even of extremely fast moving objects or highly dynamic thermal processes. Thus, exactly the moment that matters is captured with absolute precision, displayed with high resolution and precisely measured thermally.

Companies can use the new platform to construct a centralized system that allows them to easily select, combine and integrate modularized functions and usage. This ability will save companies handling 3D engineering data significant time and costs in their model-based and digitalization efforts, and improve supply-chain integration and productivity.

Senturion is a powerful dust collector that has been optimized for the volume and type of dust produced by fiber laser cutting. Fiber lasers produce large volumes of very fine particulates moving at high velocities within the laser enclosure. This dust can become deeply embedded in the filter media, making it difficult to pulse off and causing premature filter loading.

Drilling flat-bottom holes is a challenge. So is drilling on inclined or curved surfaces, drilling into cross holes, drilling stacked plates, and drilling into cross holes, stacked plates and castings and other rough surfaces. Not anymore. Leveraging the success of its KenTIP FS modular drill, Kennametal has developed a unique insert geometry (FEG) that streamlines many of these types of applications and simplifies the drilling of counterbores and pilot holes as well.

CorrTube® is environmentally friendly, biodegradable, and doesn’t contain any nitrites, phosphates, silicates, or other hazardous compounds. The tubes are very easy to use: simply match the appropriate diameter of the tube to the size of your part. The VpCI® coating on the inside of the tube vaporizes, reaching all metal surfaces to provide complete corrosion protection.

The engineered solutions offer three versatile mounting options. Direct-to-table uses t-slots, center pin and timing key, and is secured using t nuts and Socket Head Cap Screws (SHCS). QLS accurately locates and clamps the pyramid to a base element, such as subplates, using a combination of QLS shoulder screws and SHCS. Quick-Loc™ pallet systems use pull studs (spaced at the industry-standard 96mm pattern) to locate and clamp in a single step.