Home

EMUGE-FRANKEN USA

Products

+ click to show 50 results
TIN Coated Gages
TIN Coated Thread Gages have high dimensionally stable HSS construction with TIN coating that increases hardness and wear resistance, which extends lifespan and reduces the frequency of calibrations and replacements, saving time and cost. By minimizing friction, EMUGE TIN Coated Gages offer consistent measurements and precision thread sizing.
Skiving Tools
Skiving tools can be used in a variety of gear applications including the production of ring gears, shafts with internal and external splines and splined shaft profiles. EMUGE-FRANKEN Skiving Tools have no restrictions regarding the material to be machined and are highly suitable for the soft machining of internal and external gears, as well as…
MultiTOOL Program
MultiTAP tapping solution ranges from cut taps to form taps in different coatings, in addition to taps with extended lengths. MultiTHREAD MILL is an ideal general-purpose, cost-effective thread milling solution for job shops where part applications and materials frequently change. MultiDRILL™ features affordable, high-quality solid carbide 3XD and…
Cera-Cut End Mills
Cera-Cut End Mills are designed for the consistent cutting of high-temperature resistant materials such as Inconel, Hastelloy, and Nimonic as well as the machining of hardened tool steels. Cera-Cut is also suitable for making interrupted cuts, and offers a tight cutting diameter tolerance ranging from -0.0008" to -0.0016" (-20 to -40…
MultiDRILL
EMUGE MultiDRILL™ is made of a unique sub-micro grain carbide grade that is harder than conventional carbide grades for drilling, yet it retains the ability to withstand shock and chipping. MultiDRILL features advanced TIALN-T63 coating utilizing nano-layer technology with surface hardness exceeding standard TIALN-based coatings, for reduced…
PunchDrill
PunchDrill features patent-pending geometry with an innovative chip breaker which produces short chips to control machining forces. The new drill also has newly developed surface treatments and a hard diamond-like coating specially designed for this application to provide reliable chip removal and increased process reliability. When high-speed…
1:16 Tapered Solid Carbide End Mills
EMUGE-FRANKEN 1:16 Tapered Carbide End Mills work well in a full range of materials from aluminum, carbon steels, stainless steels, and exotic nickel alloys. They are made of a premium micro-grain carbide substrate with TIALN-T21 coating which resists heat, edge wear and chipping. Corner radii further prevent wear or chipping while prolonging tool…
Expanded Line of SELF-LOCK Threading Tools
The special profile of EMUGE SELF-LOCK threads allows an even distribution of stress over the entire thread length, eliminating slippage. Compared with standard threads, EMUGE SELF-LOCK internal threads show constant, maximum holding power under dynamic stress. Functions remain in good operation even with repeated loosening and re-tightening of…
MultiTHREAD Thread Mills
MultiTHREAD Thread Mills feature a proprietary TIN T21 coating developed by EMUGE, which reduces chip welding and improves chip evacuation. MultiTHREAD Thread Mills also allow one tool to thread both through and blind holes and make right or left-hand threads. Two types of sub-micro grain carbide thread mills are offered – full form or single…
TOP-Cut VAR Range Expanded
The TOP-Cut VAR line is now available in 4,5, and 6-flute configurations, with or without corner radius, and ball nose, stub, standard and long lengths in inch sizes, over 300 SKU’s in total. In addition, EMUGE-FRANKEN USA can provide custom variations or tool modifications of TOP-Cut VAR mills.  
Go and No-Go Ring Gages
Go and No-Go Ring Gages are manufactured with hardened tool steel for exceptional durability and feature a fully knurled circumference for maximum gripping ability and safety. No-Go gages are clearly marked with a red ring. UNC and UNF gages have a 2A tolerance. UNC gages are available in 19 sizes from #2-56 to 2-4 ½ and UNF gages are available in…
End Mills Catalog
The 172-page catalog, brimming with hundreds of new products, specifications, technical materials, cutting data, drawings and images is available free in print by request at www.emuge.com/media-resources/order-brochures-catalogs, or via an online interactive version on the EMUGE-FRANKEN N.A. website: www.emuge.com. 
TiNox-Cut End Mills
TiNox-Cut End Mills are made from premium ultra-fine micro grain solid carbide with a maximized transverse rupture strength for high impact applications, and produce impressive results compared to conventional end mills. Advanced PVD-applied multi-layered coatings withstand excessive heat and provide superb wear resistance for longer tool life,…
Micro End Mills and Micro Milling/Drilling Chucks
The Micro End Mills feature a patented neck design with up to 10x diameter, enabling reach into deep contours. For optimal machining performance, a high radial bending strength withstands alternating stress on the cutting edge and relieved neck. The new Emuge end mills offer High Speed Cutting finishing of 2D and 3D contours, and are offered in…
A-H Family of Taps
The EMUGE A-H family of taps is the best solution for tapping extremely abrasive materials and those materials with elevated hardness levels, such as cast iron, common in the heavy equipment and agricultural vehicle markets. EMUGE A-H Taps are now available with or without coolant through holes and with TiCN coating, or NT nitride surface…
Innoform–Steel-M Forming Taps
Emuge Corp. has introduced Innoform–Steel-M, a line of HSSE-PM taps for forming threads with improved surface quality, while increasing static and dynamic thread strength, in medium strength steels up to 44 HRC.
Slim Line Models of FPC Milling/Drilling Chucks
Emuge Corp. has expanded its line of FPC milling/drilling chucks products to include Slim Line models that are designed to enhance 5-axis machining productivity and versatility. Available in the 1/8" to 9/16" (2 mm to 14 mm) size range (FPC14), the compact, slim design with tapered shape enables easier access to the work, especially in…
Threads-all ZGF-S-Cut Solid-Carbide Thread Mills
Emuge Corp. has introduced advanced Threads-all ZGF-S-Cut solid-carbide thread mills featuring multiple teeth, a helical flute form and multiple-layer TiAlN T46 coating. The new ZGF-S-Cut thread mills increase tool life over 10 times more than conventional tools and produce precise threads in exotic materials including Inconels, nickel-based…
Turbine End Mills
Emuge Corp. has introduced an advanced line of endmills featuring unique geometry designed specifically for the high-performance machining of turbine and bladed components. New Emuge Turbine End Mills offer unprecedented cycle time reductions and long tool life in challenging forms and materials, including titanium, nickel alloys, aluminum alloys…
Punch Tap Tool
Emuge Corp. has introduced its patented Punch Tap Line in North America. The Emuge Punch Tap is for helical thread forming in cast and wrought aluminum alloys and similar lightweight materials. Emuge Punch Taps provide a new, shortened tool path process for producing internal threads in under half a second, resulting in significantly less energy…
Self-Lock Threading Tools
Emuge Corp. has announced its thread making tool quality is available in a Self-Lock integrated locking system. Emuge Self-Lock threading tools offer a high-quality alternative in thread locking for vital safety applications in a variety of industries.
Carbide Step Drill Program
Emuge Corp. has announced the launch of a carbide step drill program that features new drill–chamfer tools available from stock in real-time online at www.emuge.com/products/drills/ef-c-drills. Users can quickly and easily select from a full range of stock sizes, including the ability to order customized lengths available in less than 4 weeks.
Solid-Carbide Endmills for Trochoidal Milling
Emuge Corp. has introduced a new line of solid-carbide endmills with geometry and chipbreakers designed specifically for trochoidal milling. Emuge’s new Trochoidal endmills provide increased metal-removal rates of more than 30 percent, fewer toolpaths and longer tool life, while enabling a high axial depth of cut of up to 4XD. The Trochoidal…
MultiTAP High-Performance Taps
Emuge Corp. has announced the expansion of its MultiTAP line, high-performance taps designed to cut a range of materials, including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass and bronze. With 87 new SKUs, the Emuge MultiTAP line comprises an expansive offering of both regular and extended-length spiral-point…
EF-Series Solid-Carbide Microdrills
Emuge Corp. announced it has expanded its EF-Series of high-penetration rate drills with a new line of submicrograin carbide coolant-fed microdrills. The EF high-performance microdrills range from 0.0295 in. (0.75 mm) up to 0.1181 in. (3.0 mm) in diameter, are all coolant through design, and are ideal for aerospace, medical and precision…
Cut & Form Solid-Carbide Endmills
Emuge Corp. has introduced Cut & Form solid-carbide finishing endmills that feature a patented tool geometry that performs two functions: cutting and polishing in one operation, generating significant manufacturing time and cost savings.
Cutting Tool Grinding and Reconditioning Services
Emuge Corp. has introduced tool grinding and reconditioning services based out of the company’s North American headquarters in West Boylston, Mass. A clean, new state-of-the-art manufacturing facility at Emuge is now equipped with the latest technology CNC grinding machines and inspection equipment, providing tool reconditioning for U.S. and…
Circle-Segment Solid-Carbide Endmills
Emuge Corp. has introduced “circle-segment” cutters, a class of endmills designed to reportedly enable substantially more material removal with fewer passes in 5-Axis machining, over 80 percent cycle time reductions and up to 50 percent smoother surface finishes.
FPC Mill/Drill Chucks
Emuge Corp., in partnership with Albrecht Precision Chucks, has introduced Emuge FPC mill/drill chucks that reportedly provide unprecedented rigidity, vibration damping, concentricity, machining speed and tool life versus conventional chuck technologies for milling and drilling applications.
Softsynchro 0 & Softsynchro 4 tap holder sizes
Emuge Corp., West Boylston, Mass., a manufacturer of taps, thread mills, toolholders, clamping devices and other rotary cutting tools, today announced the expansion of its patented Softsynchro® tap holder line, adding two new holder sizes. Constructed from precision-ground body and shank sections, Softsynchro's patented design is said to…
Emuge-Franken Endmills
Emuge Corp. offers an extensive line of high-performance solid-carbide endmills for applications ranging from universal milling to aerospace and high hardness machining. The endmills, branded Emuge-Franken, are the result of extensive R&D and incorporate the latest in endmill technology, geometry and coatings and are designed to outperform…
EF Series Solid-Carbide Drills
Emuge Corp. announced the North American debut of an extensive line of high performance solid-carbide drills to further enhance its broad range of taps and threading tools.
THREADS-ALL Thread Mills
Emuge Corp. offers an expanded line of solid-carbide thread mills in its THREADS-ALL program, to include new 3XD sizes designed for maximum reach.
Turbine Endmills
Emuge Corp. introduced a new solid-carbide Turbine end mills program for milling turbine blades, impellers, blisks and other complex 5-Axis components.
Titanium Program
Emuge Corp. is introducing a comprehensive line of high-performance tools for threading demanding alloyed titanium materials.
Speedsynchro Toolholder
Emuge Corp. has introduced the SPEEDSYNCHRO tool holder, which features an integrated transmission of 1:4.412 for optimizing thread production on CNC machines with synchronous spindles.
DF-NI and C-NI Taps
Emuge Corp. announced a comprehensive line of high-performance tools for threading demanding nickel/superalloy materials to 46 HRC.
Z-Taps
Emuge Corp. announced they are introducing a new tap program, Z-Taps, an extensive line of taps featuring design and engineering that make them ideal for stainless steels, high strength alloys, tool steels and cast steels less than or equal to 30 HRC.
Solid-Carbide Thread Mills
Emuge Corp. announced the introduction of an extensive, expanded thread milling program for oil and gas manufacturing applications, including a new line of solid carbide thread mills and insert thread milling systems.
GO/NO-GO Plug Gages
Emuge Corp. has introduced a comprehensive line of precision fixed limit that are manufactured to ANSI/ASME B1.2 (Unified Inch) and ANSI/ASME B1.16M (Metric M) standards.
MultiTAP-Form
Emuge Corp. has announced the introduction of MultiTAP-Form, a high-performance forming tap designed to deliver performance increases in a wide range of materials including carbon steel, steel alloys, stainless steel, aluminum, copper, brass, and bronze.
Softsynchro HD and MQL Modular Tap Holders
Emuge Corp. has introduced a series of tool holders with variable exchangeable transfer elements and length adjustment screws.
Top Cut Endmills
Emuge Corp. has introduced Top Cut, a new series of high performance carbide end mills.
KSN5 and KSN6 Softsynchro Tap Holders
Emuge Corp. has introduced the KSN5 and KSN6 Softsynchro tap holders.
NPT Taper Pipe Taps
Emuge Corp. has introduced a line of NPT Taper Pipe Taps that features a newly developed flute form with variable skip tooth geometry.
Rekord DZ Taps
Emuge Corp. introduced a tap with superb chip-breaking capabilities that is ideally designed for machining applications in the energy and related industries.
High-Performance JIS Taps
Emuge Corp. has introduced a new line of High Performance JIS Taps for tapping applications at companies manufacturing products with Japanese-specified standards.
High Productivity Cutting Endmills
Emuge Corp. announced they offer new High Productivity Cutting (HPC) End Mills designed to address a broader range of applications.
TiNox-Cut
Emuge Corp. announced the introduction of TiNox-Cut, a new series of end mills specifically developed to provide exceptional tool life when machining challenging materials.
MultiTAP
Emuge Corp. has announced the introduction of MultiTAP, a tap to cut a wide range of materials, including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass and bronze.

Industry News

+ click to show 4 results

Milling a traditional nutcracker

The Christmas season and its traditions may have faded into memory, but one traditional Christmas icon now has a metal counterpart that will last for many Christmases to come.

Emuge-Franken taps into success with measurement technology

At Emuge-Franken, manufacturers of threading, gaging, clamping and milling technology, sensors and dynamometers from Kistler are used to aid in the development of new precision tools.

GROB Systems to host Aerospace Technology Day

GROB Systems Inc., a global supplier of manufacturing systems and machine tools, will host an Aerospace Technology Day, together with industry partners Concepts NREC, Emuge-Franken USA, Open Mind Technologies, Seco, and Third Wave Systems at GROB’s North America headquarters and production facility.

Auto parts maker saves 60% with mill and chuck solution

Auto parts manufacturer SB Dezigns in North East, Maryland, has implemented a new end mill and chuck solution that helped them save 62% in costs on a recent application.

Articles

+ click to show 14 results

Selecting the correct drilling tool

Author:

Column: Feature Article

Published:

Economics Of Drilling

Author: Christopher Tate

Column: Feature Article

Published:

Boost threading efficiency

Author: EMUGE-FRANKEN USA

Column: Feature Article

Published:

Thread without dread

Author: William Leventon

Column: Feature Article

Published:

Beyond tried-and-true tool holding

Author: Alan Richter

Column: Feature Article

Published:

Four-fluted end mill extends tool life

Author: CTE Staff

Column: Productive Times

Published:

Multipurpose mills

Author: William Leventon

Column: Feature Article

Published:

Hybrid manufacturing essentials

Author: Dan Doiron

Column: Feature Article

Published:

Threading exotic metals

Author: Larry Adams

Column: Feature Article

Published:

What is a Collet? Types, Uses, and Design Explained

Author: William Leventon

Column: Feature Article

Published:

Working hard to avoid workhardening

Author: Alan Richter

Column: Feature Article

Published:

Material-specific taps continue to evolve

Author: Greg Bartlett

Column: Feature Article

Published:

Chamfers and countersinks halt burr formation

Author: Marlon Blandon

Column: Feature Article

Published:

Look Ahead: Trochoidal endmill (over)laps competition

Author: Michael C. Anderson

Column: Look Ahead Department

Published:

Videos

+ click to show 4 results

Boosting Threading Efficiency: Five Tips to Avoid Tap Breakage

Join us for an Ask CTE Contributors webinar led by industry veteran Tom Kowalski, Regional Manager for EMUGE-FRANKEN USA, when he provides invaluable insights on "Avoiding Tap Breakage with These Five Tips". Designed for manufacturers spanning all industries, this webinar will delve into the intricacies of tap selection, drilling…

CTE Lunch & Learn - Tapping in Titanium

This 30-minute webinar offers our readers an opportunity to take a deeper dive into the "Thread Without Dread" article published in the January 2023 issue of Cutting Tool Engineering. The article, which features insight from EMUGE-FRANKEN USA and Tapmatic Corp., maps out strategies for meeting the special challenges of putting screw…

Highlights from EASTEC 2019

Cutting Tool Engineering Owner/Publisher Dennis Spaeth walked the aisles at EASTEC 2019 with his trusty camera in hand. Take a look at some of the highlights captured along the way.

Thread milling with Emuge ZGF-S-Cut

Emuge Corporation’s Marlon Blandon talks up the company's newest threadmilling product, the ZGF-S-Cut that features a left-hand helix on the flute. Take a look.

People & Companies

+ click to show 14 results

Emuge Corp. expands US manufacturing facility

WEST BOYLSTON, MA U.S.A. (November 15, 2018) – Emuge Corp., a manufacturer of taps, drills, end mills and other rotary tools, has recently broken ground to build a 22,000 sq. ft. expansion project that will double the size of its U.S. headquarters and manufacturing facility in West Boylston, Massachusetts.

Emuge and Brooks Associates collaborate to increase customer support

Emuge Corp., a leading manufacturer of high performance taps, thread mills, drills, endmills and other rotary tools, and precision machine tools supplier Brooks Associates Inc. have announced a collaborative effort that expands their respective capabilities for customer training, machining demonstrations and applications testing.

Emuge-Franken and Grob announce strategic partnership

Emuge-Franken USA and Grob Systems Inc. have formed a strategic partnership to provide advanced 5-axis solutions, expertise and support to customers.

Learn blisk machining strategies at June 7 tech day

Emuge-Franken USA, Grob Systems Inc. and Concepts NREC are holding a complimentary Tech Day on June 7 from 10 a.m. to 1 p.m. Eastern time at the Emuge Technology Center in West Boylston, Massachusetts.

Emuge-Franken names national sales manager

Emuge-Franken USA, a manufacturer of high-performance taps, thread mills, drills, end mills, clamping devices and other rotary tools, has appointed Mike Patterson as national sales manager for the U.S. and Canada.

Emuge Corp. appoints Shannon Filippelli

WEST BOYLSTON, MA U.S.A. – Emuge Corp., a manufacturer of taps, drills, end mills and other rotary tools, has appointed Ms. Shannon Filippelli as Marketing Manager, effective April 1, 2019.

Emuge Corp. appoints Scott Lowe national accounts manager

Emuge Corp. has announced the appointment of Scott Lowe as national accounts manager for the U.S. and Canada. In his new position, Lowe is responsible for developing and managing channel partner relations with key customers, distributors and integrated suppliers of Emuge products.

Emuge-Franken N.A. names new national sales manager

Scott Lowe is responsible for leading the company’s sales organization and growing market share.

Emuge-Franken USA partners with Okuma

Emuge-Franken USA, a manufacturer of high-performance taps, thread mills, end mills, drills and other rotary tools, has partnered with Okuma America Corp., joining the Partners in Technology program, founded by Okuma. 

Emuge appoints Dan Doiron milling product manager

Emuge Corp., West Boylston, Mass., recently named Dan Doiron its new milling products manager, which puts Doiron in charge of endmills, toolholders, technical and CAD/CAM program support for milling products, according to a recent company news release.

Emuge hosts grand opening of expanded manufacturing facility

Emuge Corp. held a grand opening ceremony of its significantly expanded, custom-designed manufacturing facility in West Boylston, Massachusetts, on Oct. 15, 2019. Marking a 35-year presence in the U.S. along with increased growth in North America, the Emuge expansion includes more manufacturing and tool reconditioning space, the addition of a new…

Emuge updates brand name to Emuge-Franken

Emuge Corp. announcing that moving forward the company brand name will be EMUGE-FRANKEN.

Mold and die workshop with live demos scheduled for July 20

Emuge-Franken USA, Grob Systems Inc. and Open Mind Technologies are jointly holding a complimentary mold and die workshop July 20 from 10 a.m. to 1 p.m. ET at the Emuge Technology Center in West Boylston, Mass.

Emuge-Franken USA celebrates 40th anniversary

This year, Emuge-Franken USA, a manufacturer of taps, thread mills, drills, end mills, and other rotary cutting tools, is celebrating its 40th anniversary.