Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
Vomat Mixing/Dosing and Care System
With a fully automatic maintenance system, Vomat now makes the use of water-miscible MWF even more time- and cost-optimized. The system has a modular design and can be integrated into the respective conditions of each grinding system as required.
SprutCAM X 17
The evolution and ehnancement of SprutCAM X user interface will continue. "Less interface is better" sounds simple in theory, but it becomes an extremely challenging task when dealing with CAM software with thousands of features. For many years we have been striving to keep the UI as simple and lightweight as possible.
WL17 Indexable Insert
The inserts feature three cutting edges at a 50° copying angle. Compared to the WL25 indexable inserts, which measure 25 mm per side, the WL17 inserts measure 17 mm per side. The WL25 inserts are now additionally offered in W0110-C Walter Capto tools and the W1211 QuadFit exchangeable head for Accure.tec anti-vibration boring bars.
High-Gloss Finish for Milling Cutters and Drills
Thanks to significantly reduced friction, this new procedure improves chip removal from the machining zone, while the cutting heat is dissipated even more quickly and effectively through the chips. Temperature increases on the cutting tool and in the workpiece to be machined can be effectively reduced, as can material buildup and galling on the cutting edge.
One Touch Push Lock Clamps
The piston diameters range from 8.5 to 10 mm and provide 180 to 330 lb. clamping force. The push lock clamps come in orange or black plastic hands, as well as metal handles. They are ideal for applications such as positioning of guide rollers and positioning of fixturing tables.
Mantis 3rd Gen
Mantis 3rd Gen features include; improved optics for both hand-to-eye coordination and excellent depth perception, a 3-position turret to house up to 3 objectives ranging from 3x to 15x, the introduction of an 8x super long working distance lens, five different illumination options providing flexibility to optimize the lighting to view the perfect image, and the Mantis PIXO offers an improved, higher resolution camera for image and video capture.
Vertical Tilt-Frame Band Saws
Cosen Saws V-1822 is an exceptional entry-level cutting solution that is simple and reliable. Ideal for workshops and small-scale operations, this saw is easy to use and allows operators to control the entire cutting process manually. Cosen Saws V-2026NC & V-2230NC represent a significant step up in terms of efficiency and productivity.
SPECTROLAB S LAS02
Continuously improved by customer input and rigorous usability testing, the new SPECTROLAB S LAS02 features proprietary CMOS+T technology to identify and measure, with high accuracy and precision, all elements in incoming, in-production, and out-going materials as well as in researching new materials.
Milling Optimization Service
The basis for this innovative service is a dynamic stiffness analysis of the machine tool. The physical optimization phase (known as the 'tap test') can be accomplished with impulse hammers and accelerometers from Kistler; this is followed by an analysis of the customer's NC program, performed with new software from Productive Machines.
Combination Bench and Pipe Vise
The #9629756 Combination Bench and Pipe Vise from Palmgren features sealed construction, replaceable serrated steel jaws and pipe jaws and is 70% stronger than similar u-shaped vises.
igaging EZ-View DRO Plus Digital Scales
Igaging EZ-View DRO Plus Digital Scales with Remote Readouts for horizontal or vertical measurements, with absolute encoders, are available with measurable ranges of 0-6"/150mm, 0-12"/300mm, 0-24"/600mm, 0-36"/900mm from KBC Tools & Machinery. They have a resolution of .0005"/.01mm/1/128".
ALTO 6.5.5
Designed for touch-trigger probing only, the CMM is capable of capturing precise measurements very rapidly, as it is able to deploy a motorised PH20 5-axis probe head from Renishaw for a three-fold increase in inspection speed.
