Resources

For multi-axis subtractive machining, there is a new option to preview the automatically detected deburr edges before calculating the toolpath. Users can also include/exclude drive curves in/from the toolpath calculation to speed up programming. The rotary machining component now offers a floor finishing cycle to complete the ModuleWorks basic finishing portfolio of wall and floor finishing.

Products December 23, 2022

ZeroAct E-motion

Ideal for Industry 4.0, ZeroAct e-motion features wireless connectivity and data transfer, and fully automates manufacturing processes using a 24V power supply that operates with a built-in electro-motor. In addition, integrated electronic sensor technology provides contact-free part detection and safety for missing or misaligned parts.

Products December 23, 2022

AESUB Transparent

A spray with which workpiece dimensions and colour values can be digitised in one scan: AESUB transparent. The workpieces are sprayed uniformly with AESUB transparent from a distance of 15 to 20 centimetres. After just a few seconds, a matt, transparent layer is generated on the workpiece's surface. In addition to capturing the surface contours, optical scanners can simultaneously capture the colour values of the object being measured.

Products December 23, 2022

Big Bore

Ideal for handling the harsh demands of the Oil and Gas industry, Big Bore and all of its variations is ideal for machining straight pipe, bent pipe and threading of couplings in two setups. This revolutionary chuck also offers extended jaw stroke for greater clearance to ensure safety for the and loading and unloading of the many variations found in oil field pipe.

News December 22, 2022

Optimizing press-hardening lines can shorten cycle times by 20%

How can you get the most out of an existing press-hardening line? According to AP&T, a company that develops high-performing production solutions for the sheet metal forming industry, when updating a press-hardening line there is significant potential to shorten cycle times and increase production.

Products December 22, 2022

Second Generation of MAX System

Today's MAX System introduces the latest innovation known as Focused Deburring. These multi-axis machines feature up to four 1- to 5-axis heads or towers, which can process simultaneously or in sequence within a single working environment. This ability allows the machines to perform multiple operations on many edges and surfaces of a part at the same time. For example, a single MAX System can remove a protruding burr from an 8" spur gear, create a precision .060" chamfer on both sides of the same gear, and wash the part within 30 seconds.

Products December 22, 2022

WCE5 Solid End Mill

The 5-flute square-end end mill with sharp edges, chamfers and corner radii joins a 4-flute square-end and ball-nose end mill with both straight and Weldon® shanks as part of WIDIA's WCE solid end mill portfolio. The WCE4, a 4-flute geometry solid end mill, combines the asymmetrical index and variable helix features to excel in operations like full slots and heavy cuts.

News December 21, 2022

Mastercam partners with Camwerk to offer G code simulation

Under a new partnership that provides G code simulation with Mastercam, users can simulate the entire machining process with the click of a button.

Products December 21, 2022

TC388 and TC389 Supreme Solid Carbide Taps

TC388 Supreme (50–58 RC) and TC389 Supreme (55–65 RC) feature new patent-pending cutting geometries that fully shear off the root of the chip when reversing, thus torque peaks are minimized. This prevents fractures, prolongs the tool life, and increases process reliability. Furthermore, the new taps are coated using Walters new HiPMS coating technology which creates a better surface finish, and higher thread form quality due to this innovative new coating process. Lubrication with oil, which was often necessary until now, is no longer required. Instead, standard water-based emulsions can be used, optimizing handling and saving additional machining costs.