Resources

KBC Tools & Machinery is pleased to announce that it is now carrying and stocking the Evolution line of heavy duty Metal Cutting Power Tools made especially for metalworking in both Canada and The US and featuring Magnetic Drills and Circular Saws.Now you can cut through mild steel up to 4 times faster, without heat build up or burrs…and less secondary re-work with KBC and Evolution's Circular Saws and Magnetic Drills.KBC stocks Evolution's 1.1/8" and 1.5/8" Magnetic Drills with 2,860 lbs./f of magnet adhesion, ½" drill capacity, 2" maximum cutting depth, ¾" cutter shank, 10 amps, drill travel of 11.1/2", 8 ft. rubber power chord.

News May 25, 2022 Michael J. Hicks, Ph.D.

Photochemical etching of microfluidic plates

Plate heat exchangers are found in numerous industrial applications, and essentially use metal plates to transfer heat between two fluids. Their use is burgeoning as they out-perform conventional heat exchangers (often a coiled pipe containing one fluid that passes through a chamber containing another fluid) as the fluids being cooled are in contact with a much greater surface area, which optimizes the transfer of heat and greatly increases the speed of temperature change.

Product May 25, 2022

3DViewStation V2022

With KISTERS 3DViewStation, the staging of complex processes and products is very successful, as they can be quickly visualized in new perspectives, combinations or environments. Renderings are amazingly similar to conventional product photography and are more cost-effective in the medium term.

Product May 25, 2022

You Ji VMT Series Vertical Mill/Turn Center

The vertical column and base are made from heavily ribbed Meehanite castings that minimize thermal distortion and dampen vibration. Smooth operation is virtually guaranteed complements of enclosed X-, Y- and Z-axis box guideways featuring hand-scraped mating surfaces, Turcite-B coatings and forced lubrication.

Product May 25, 2022

HALCON 22.05

By detecting logical anomalies in images, HALCON 22.05 opens up completely new application areas and represents a further development of the deep learning technology of anomaly detection. Until now, it has only been possible to detect structural anomalies strictly on a local level.

Product May 25, 2022

PressFit ExI 11xx Encoders

Developed in collaboration with global motor manufacturers, HEIDENHAIN's new PressFit encoders include a "PressFit" flange that can be secured in a motor housing through a frictional connection, using a specially designed tolerance sleeve. This innovative system promises to support automation efforts by easing mounting requirements, leading to less mounting time being required.

News May 24, 2022

ANCA’s video academy gets new host

The ANCA Academy, the series of videos from ANCA that cover a different technical topic each month, has a new host. The third video in the series is called "Introduction to ANCA Software Applications," and introduces Hugh Ingham to the series.

Product May 24, 2022

Cut Level 3 and 5 Protective Sleeves

These sleeves are designed to provide users with a comfortable fit and all-day protection. The secure tapered fit and silicone printed bicep band prevent sliding, reduce sagging, and limit material bunching and an elastic thumb loop keeps the sleeve in place when putting on gloves.

Product May 24, 2022

Cermet WEP10C Turning Insert

These indexable turning inserts are designed for applications where a soft cut and high precision is required. Long tool life is achieved through the WEP10C coated cermet grade with multilayer PVD TiCN TiAlN coating and extra fine cermet substrate grain. Walter's combination of edge preparation and grade also ensures dimensional stability.

Product May 24, 2022

TungThread BX330 CBN Inserts

Turning threads on hardened parts can be a challenge when using coated cemented carbide inserts: the cutting edge rapidly wears out before finishing the entire thread profiles, inhibiting greater feed rates and D.O.Cs. to be applied for increased productivity.

Product May 21, 2022

3+3 Air Chuck

Ideal to handle the harsh demands of the Oil and Gas industry, BB-FZA2G allows for quick and easy setup of odd shaped pipe for threading and re-threading. Thanks to incorporating three jaws with axial adjustment of the centering position while also using three compensating jaws with extra long rapid and clamping stroke of 1.5", there is no need to re-shim the part.

News May 20, 2022

Rush Machinery hires field service technician

Rush Machinery has appointed Tom Lebel as field service technician.

Keep scrolling

« Previous 1 … 219 220 221 222 223 … 1,440 Next »

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Browse results

Explore

Address:

Follow