Resources

The RSH is designed for forces up to 7,943 lbf (35kN), speeds up to 20 in/sec (498 mm/sec) and stroke lengths up to 48 in. (1200mm). It is available in both ball screw and roller screw options. While ball screws are an economical option with medium life and force capabilities, roller screws (manufactured by Tolomatic) provide higher force capability, increased life and improved accuracy.

Products February 24, 2022

R-Theta 2-Axis Precision Motion Stages

The fast controllers allow highly precise triggering with 0.01% time tolerance between signals. Trigger signals can be derived off absolute encoders or analog signals (sin/cos encoder), enabling higher precision, safer, and simplified solutions as compared to outdated digital encoder-only triggers. With the modern PI motion controllers, a trigger in an R-Theta configured system will work just as well as an XY position trigger, with the coordinate specifications simply defined in polar coordinates.

Products February 24, 2022

RUP1 Ultrasonic Probe

The RUP1 probe uses a 20 MHz transducer and provides a thickness measurement range of 1 mm to 20 mm with an accuracy of better than 10 microns using touch points. The tip ball is user-replaceable and is preserved by a protective cap that can be automatically removed and maximises tip ball life. The RUP1 probe is fully compatible with the MRS2 change rack using the RCP TC-3 rack change port and is interchangeable with all other probe options available for the REVO system.

News February 23, 2022 Dennis Spaeth

USCTI scholarship winner shares experience; 2022 award deadline March 1

Winning a U.S. Cutting Tool Institute scholarship in 2021 "was huge," and not just financially, according to Autumn Ohl, an aerospace engineering major in her freshman year at Kent State University, Kent, Ohio. USCTI, a trade association for manufacturers of cutting tools for the metalworking industry, awards a $5,000 scholarship to one lucky winner who plans to attend or is already enrolled in a college or vocational school program relevant to the manufacturing industry. This year's winner will be announced during the USCTI Spring Meeting, which is set for April 30 to May 2 in White Sulphur Springs, West Virginia.

News February 23, 2022

The design engineer’s guide to photo-chemical etching

As a precision sheet metal machining technology, photo-chemical etching achieves exacting tolerances, is highly repeatable, and, in many instances, is the only technology that can cost-effectively manufacture precision metal components with the accuracy necessary in demanding, and often safety-critical applications.

Products February 22, 2022

Bar Feeder Control

The control enhances the user-friendliness of the Quick Load Servo S3+, a bar feeder that is well suited for unattended and lights-out production thanks to its proven robustness and reliability. Accommodating spindle length bars with diameters from ¼" to 4 – ¾", the bar feeder enables partial changeovers in 15 seconds or less and complete changeovers in 1 minute or less. A unique Parts Library function stores hundreds of part programs that simplify operator setups.

Products February 22, 2022

Model 7905 Digital Static Meter

The Digital Static Meter is a sensitive and responsive product that indicates surface voltage and polarity on objects up to ±20 kV from one inch (25mm) away. After zeroing the meter, move it to within one inch of your problem surface(s) for a LED illuminated reading of the static voltage. It includes a National Institute of Standards and Technology certification for accuracy, and will help discern the most troublesome static areas in any process.

Products February 22, 2022

KFA 1500 Compact Filter System

The KFA 1500 (260" x 100" x 103" h) has a tank volume of 10,000 liters and a filter capacity of 1,500 liters/minute. The medium is filtered by high-efficiency precoat filters in full flow at a filter fineness of 3-5 μm. Filtration takes place on demand and in an energy-efficient manner via a frequency-controlled system pump. The special drying unit is optimally designed for large batch sizes.

Products February 22, 2022

GN 36, GN 37 Machine Feet

The machine foot GN 36 uses the weight of the machine to create a very stable and robust connection between the threaded stud and the foot. The threaded stud is not connected to the foot plate. The second machine foot GN 37 from Winco also has a central fastening hole running clear through. This allows use of an anchor bolt. The anchor secures the foot to the floor, preparing it for lateral loads.

Products February 22, 2022

VpCI-337

VpCI®-337 is a waterborne Vapor phase Corrosion Inhibitor that can be applied by fogging into metal void spaces. This labor-saving technique uses a minimum of product to protect large areas or volumes. Vapor phase Corrosion Inhibitors in the fogging fluid diffuse throughout the void and are attracted to metal surfaces where they "condense" and form a protective molecular layer. This layer inhibits the corrosion reaction on the metal surfaces even in the presence of oxygen and residual moisture.

Videos February 21, 2022

Platinum Tooling Virtual Booth Visit

In this video, Preben Hansen, the president of Platinum Tooling, displays and details his company's offerings for the machine tool market.

News February 19, 2022

Understanding photo-chemical etching’s capabilities and costs

Photo-chemical etching is a viable alternative to legacy metal fabrication technologies and is seen in many applications as the only technology that can achieve the repeatability, accuracy, and geometric complexity demanded by OEMs from across myriad industries.

Keep scrolling

« Previous 1 … 230 231 232 233 234 … 1,433 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow