Resources

Using Alum-Renew prior to painting improves even distribution of high-performance resins through reduction of surface irregularities. The kit allows users to try products of varying intensities before purchasing selected materials in production quantities.

Products January 27, 2022

EcoShield 386 FD Quick-Dry Anticorrosion Coating

EcoShield® 386 FD Water Based Micro Corrosion Inhibiting Coating is a force-dry version of Cortec's top water-based anticorrosion coating, EcoShield® VpCI®-386. As such, EcoShield® 386 FD offers excellent corrosion protection at 1.5-3.0 mils (37.5-75 µm) DFT (dry film thickness). The advantage is that EcoShield® 386 FD force-dries in only 5-10 minutes at 150 °F (54 °C) and has good hot hardness, which keeps the hot coated parts from sticking together before they can cool down.

Products January 27, 2022

M18 FUEL Grinders

Both grinders feature a RAPIDSTOP™ Brake for enhanced user safety, stopping most wheels in less than two seconds. The grinders are available with either a paddle switch, designed for increased comfort and ease-of-use when operating in various positions, or a slide switch, designed to reduce user fatigue. Tool-free guard adjustments provide faster guard installations and adjustments to keep users productive on the job.

News January 26, 2022

Customers benefit from close collaboration with Seco Tools

Through collaborative partnerships with customers and their partners, Seco Tools monitors trends and identifies challenges, developing the knowledge required to overcome the industry's most demanding issues. Putting customers at the heart of research and development (R&D) has paid rich dividends for Seco Tools in terms of identifying and developing new products and solutions that can help change the face of manufacturing around the world.

Products January 26, 2022

P3 Collet

The anti-friction coating reduces radial distortion helping improve run-out. Parlec P3 ER collets have a repeatably accuracy of 0.0001" and are sealed for coolant pressures up to 2,000 PSI due to a special slotting design. Parlec P3 ER collets are available in ER11, 16, 20, 25, 32 and 40 in inch and metric sizes and are meant to be used with on-size tooling.

Products January 26, 2022

HyperMILL 2022.1 CAD/CAM Software Suite

Highlights in hyperMILL® 2022.1 include a new break-edge function for contour milling, combined pocket milling together with a finish path allowing cutter compensation, and increased efficiency for 3D plane machining. The new automated 3D plane machining strategy improves machining quality by searching for suitable, high performance path layouts according to parameters including when adaptive pockets are present.

Products January 26, 2022

TS 760 Touch Probe

The TS 760 probe offers extremely high accuracy (±1 µm) and homogeneous switching behavior over 360°. And for 3-D measurement, the feed rate/probing speed of 1 m/min is four times faster than other commercially available products that offer the same impressive repeatability of (2σ ≤ 0.25 µm).

News January 25, 2022

ARCH Cutting Tools names managers

ARCH Cutting Tools in Bloomfield Hills, Michigan named two key manager positions. Anja Redzepagic was named national channel manager and key accounts, and Dave Valtierra was named West Coast Regional Manager.

Products January 25, 2022

MultiShape Ceramic Media

This media has a patented shape without any flat, parallel surface areas. On the one hand this unique design prevents media lodging in the work pieces, which can occur particularly in case of complex work pieces. Such lodged media can severely affect the finishing process and must frequently be removed by hand. On the other hand, the shape with its rounded surface areas allows the surface refinement of work pieces, which to-date could not be handled by mass finishing at all or only with very complicated operational setups. This includes components with difficult-to-reach surface areas like tight radii, undercuts, notches and slits, which can frequently be found in stamped and bent components.

Products January 25, 2022

AH3225 Insert Grade

AH3225 consists of the latest nano multi-layer coating technology with three major properties with excellent coating substrate adhesion for a high level of wear and fracture resistance. Integrating a dedicated carbide substrate with excellent thermal property provides the grade with increased thermal shock resistance and hardness reducing thermal crack generation on the cutting edge. This prevents unpredictable insert failure, significantly extending tool life and reliability for steel machining.

Products January 25, 2022

VE Cam Digital Microscope

Packed with new and established features that are available on Vision Engineering's EVO Cam ll, the VE Cam enables users to do more within a smaller footprint making it ideal for many routine inspection tasks. The VE Cam is stand alone and does not require a PC, keyboard or mouse.

Videos January 24, 2022

Robotics Results: Increasing productivity 65%

The Robotics Results column in the February 2022 issue of Cutting Tool Engineering magazine demonstrates how ROI is guaranteed with robotic automation, and enables industry professionals to visualize their ROI through off-the-clock operations.

Keep scrolling

« Previous 1 … 238 239 240 241 242 … 1,433 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow