Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
Maximize Machine Uptime – By Streamlining Tool Setups Offline
Maximize machine uptime by streamlining tool setups offline. Manual tool setups are time consuming, inefficient, and a thing of the past. Today's most efficient shops integrate a presetter to maximize uptime, boost accuracy, ensure consistency, and improve overall machining efficiency - for both mills and lathes. Elbo Controlli Nikken presetters by Lyndex-Nikken provide rock solid precision, making them ideal for workshop environments.
New CAMFIX and Square Turning Holders with Indexable Cartridges
Preventing tool breakage during machining is a significant challenge, leading to tool holder failures and costly replacements. Iscar's CER-M-TURN system addresses this by allowing the replacement of only the affected cartridge when an insert breaks, rather than the entire tool holder. This cost-effective solution ensures compatibility with various cartridges.nnThe system features four coolant inlets: two on the upper jaw and two on the lower jaw, directing coolant precisely to the cutting edge. An enhanced clamping mechanism also helps prevent the rotation or breakage of brittle ceramic, CBN, or PCD inserts, ensuring optimal performance and longevity.
How KPG Machine is Fueling Aerospace & Defense Manufacturing
Tungaloy-NTK is proud to share the story of Ryan Stickle, owner of KPG Machine located in Danielson, Connecticut. Ryan explores his team's dedication towards aerospace machining, and how both quality and efficiency make all the difference. At KPG Machine, heat-resistant alloys such as nickel-based and cobalt-based alloys are processed using Tungaloy's grade AH8015. This video showcases the performance of AH8015 from a real-world perspective and shares the owner's passion for making things that drive the company forward.
Overview of CemeCon’s HiPIMS PVD coating deposition process
Produced by CemeCon, this five-minute video offers a visual overview of the pre-treatment, coating and post-treatment steps the company takes to apply a PVD coating to tools using its high-power impulse magnetron sputtering (HiPIMS) method. (No audio.)
Tooling Tech Group names director of operations
Tooling Tech Group (TTG), a provider of highly engineered tools and automated assembly equipment to a range of industries, has appointed Matthew Edwards as its director of operations.
Honoring Legacy Through the Jerry R. Iverson Memorial Scholarship
In this video, Terry Iverson, founder of Champion NOW!, shares the story behind the Jerry R. Iverson Memorial Scholarship and how it honors his father's legacy in manufacturing. He explains how the scholarship is funded, who it supports, and why it matters for the future of the industry.
Mazak ramps up service with new Phoenix Technical Center
As manufacturing operations expand across the Western United States, Mazak Corp. has grown its service and support network in the region by opening a new Phoenix Technical Center, scheduled for later this year. The facility will give local manufacturers access to process and application engineering expertise, training, and collaboration opportunities for developing new manufacturing solutions.
5-axis universal machining center
The GROB G150 5-Axis Universal Machining Center from Grob Systems Inc. is the company's smallest horizontal machining center in its modular G-series Universal line. According to the company, the G150 provides high precision, complex machining in a compact size with a smaller work envelope. Featuring direct and absolute position encoders in all axes and an innovative machine cooling process, the machining center provides exceptional contouring accuracy.
Zero-point clamping modules with universal interface
The APS 138 E and APS 138 I zero-point clamping modules from SMW Autoblok are engineered to deliver <0.005 mm repeatability, maximum rigidity, and universal interface compatibility across nearly all zero-point systems currently in the market.
DMG Mori and Open Mind forge global sales alliance
DMG Mori and Open Mind Technologies AG have entered into a global sales agreement to accelerate digital and machining transformation for customers worldwide.
Mazak achieves production milestone
Mazak has built its 40,000th machine at the company's Mazak iSmart Factory in Florence, Kentucky. The 518,320-square-foot facility, situated on Mazak's nearly 1-million-square-foot manufacturing campus, produces many of Mazak's most popular machine models, including its Quick Turn Series machines, VTC Series machines, and Ez Series of turning and milling centers. It is home to the company's U.S. manufacturing technology R&D efforts.
Toolholding system for large-diameter tools
The powRgrip (PG) 48 toolholding system from Rego-Fix USA is suited for large-diameter tools and aggressive machining. For cutters up to 40mm (1.500") in diameter, the company says the PG 48 holder ensures concentricity and total indicated runout (TIR) with deviations of less than 3 µm (0.0001") for tool lengths up to 3 x diameter and length pre-adjustment with a repeat accuracy of less than 10 µm (0.0004").
