Resources

For one high-mix, low-volume application, Methods Machine Tools reported that it worked with diamond tool manufacturer CDP Diamond Products Inc. in Livonia, Michigan, to design, create, test and integrate a custom turnkey automation cell composed of a Fanuc CRX cobot (video demo), two Fanuc C600iA Robocuts and an infeed/outfeed system.

News August 13, 2021

The value of Patriot High Performance tools

Supporting both the growth of U.S. manufacturing and the growth of the cutting tools market is ARCH Cutting Tools, with its expanded, all-American Patriot High Performance portfolio.

Products August 13, 2021

PJ 303X 5-Axis Machining Center

The machine's X-, Y-, and Z-axis travels are 300mm, 325mm, and 200 mm (11.8", 12.8", 7.9") respectively. A-axis rotation is +40˚ to -100˚, and the C-axis rotates a full 360˚. High-speed linear motors move the X-, Y- and Z-axes, while the rotary axes employ direct-drive motors. Rapid traverse speed for the X-, Y-, and Z-axes is 20 m/min (66 ft/min).

Products August 13, 2021

GN 415 Side Thrust Pins

GN 415 is available in three sizes between 0.87 and 1.54 inches (22 and 39 millimeters) wide, each with two spring strengths. The two available slide types and the wedge-shaped or cylindrical, rounded thrust pad not only hold parts with side pressure but also exert an additional downward force. All thrust pads can be rotated around their long axis in 90-degree steps to optimally adjust to the part geometry – this is as simple as loosening the central slide screw. The thrust pads are also available in a POM plastic version as well as in stainless steel with smooth or textured pressure pad for better grip. The latter type is produced by injection molding of metal and is therefore subject to only minimal measurement tolerances.

News August 12, 2021

Eriez appoints regional sales director

In response to growth in Europe, the Middle East, India and Northern Africa, Eriez in Erie, Pennsylvania, has promoted Gareth Meese to Regional Sales Director-EMEA.

Products August 12, 2021

BigRep SHIELD

Far surpassing the industry standard of 1%, the BigRep SHIELD maintains 0.1% humidity by looping air through a controlled desiccant chamber without the use of heat, therefore avoiding the risk of over-drying filaments from long-term heat exposure. As part of an industrial workflow, the BigRep SHIELD reduces misprints and material waste by 20% and saves up to 50% on repair costs caused by clogging and extruder damage.

Products August 12, 2021

Panel Interface Connectors

Once in place, the PIC, which houses convenient pass-through connections, allows quick, easy, safe access to the controls inside the cabinet without opening the main door. The ability to interface with the contents of the cabinet without opening the door prevents a lot of potential safety hazards associated with having an open electrical panel, such as Arc Flash.n

Keep scrolling

« Previous 1 … 270 271 272 273 274 … 1,433 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow