Resources

The basic configuration of the CX20x3 includes two independent Gbit Ethernet interfaces, four USB 3.1 Gen. 2 and one DVI-D interface. In addition to the CPU and chipset, the basic module also includes 8 GB RAM. The controller boots from a removable CFast flash card. The CPU has 128 kB of internal NOVRAM as persistent data memory if a UPS is not used. A fieldbus and serial interface are available as options. All other components in the CX2000 family can be connected via the high-pole connections on both sides.

Products February 11, 2021

Specialty Hinges

For heavy duty applications, for example, try hinge GN 237.3, a compact, heavy duty hinge of stainless steel. With a 180° range of motion, these hinges can stand up to even high dynamic wear—regardless of the mounting orientation—thanks to special shim washers. Depending on the selected type, the hinge bands also have centering extensions that ensure a tighter fit—preventing sliding and eliminating the transverse forces that otherwise place extremely heavy loads on the screws.

Products February 11, 2021

CO2 Snow-Jet Booths

With the new manual and automated JetStation-HP booths, acp systems AG supplies compact cleaning solutions for these use cases with quattroClean technology. The closed, sound-proofed stand-alone units are made entirely of stainless steel. They are only equipped with components and materials used in cleanroom applications. When designing the process chamber, attention was paid to ensuring that detached contaminants and carbon dioxide are removed quickly and effectively by the integrated extraction system and that no dirt pockets can form. This prevents the cleaned parts from becoming recontaminated.

Products February 11, 2021

LIC 3100 Absolute Kit Encoder

This new LIC 3100 absolute kit encoder is an additional offering that fits between HEIDENHAIN's already successful LIC 4100 and 2100 series. It is expected to be of special interest to users since it is also especially tolerant to contamination and has very loose mounting tolerances.

News February 10, 2021

Eriez executive vice president recognized for mineral contributions

Eriez Vice President of Global Technology, Michal J. Mankosa, Ph.D., was named the 2021 Robert H. Richards Award for his contributions in further mineral beneficiation.

Products February 10, 2021

LK StyliCleaner

The compact StyliCleaner, which has a 70mm (2.8in) x 100mm (3.9in) footprint, is available in two sizes, StyliCleaner8 and StyliCleaner16, designed to decontaminate styli from 0 to 8mm (0.31in) and from 6mm (0.24in) to 16mm (0.62in) in diameter, respectively. The separate control unit may be positioned on the CMM table, or if space is limited it can be attached to the CMM stand using an optional mounting plate.

Products February 10, 2021

Angled Round Toolholders

The ANGLED ROUND TOOLHOLDERS position the insert at 30°, 45° or 60° angles for reliefs, undercuts and angled OD and face grooves. Round shank sizes are available in diameters of 1/2", 5/8", 3/4", 1", 20 mm and 25 mm. The ANGLED ROUND TOOLHOLDERS are for use with THINBIT® inserts in grades for ferrous and non-ferrous materials.

Products February 10, 2021

EVN Grinding Oil

EVN provides additional benefits over normal grinding oils. Its combination of low viscosity (5.4 cSt) coupled with a high flash point (370 degrees F) is not possible in petroleum based products. That means that EVN improves flushing, which helps grinding performance while also providing the increased safety features.

Products February 10, 2021

FSH Solid Carbide Thread Mills

The FSH combines the latest in substrate and coatings with multiple flutes and the highly effective left-hand helix design to achieve both better performance and longer tool life in today's hard-to-machine materials. Manufacturers who have previously attempted to use taps in small-hole threading understand that, especially in heat- resistant materials, breakage is a frequent occurrence.

Products February 10, 2021

BA W06 Enhanced

The new version of the machine offers a more flexible and therefore more precise machining process. The BA W06 features variable spindle distance of 590.00 mm – 651.00 mm. Travel in the Y- and Z- axes 630 mm and 510 mm, respectively. The independent Z-axis enables machining coupled with compensation value. Fine adjustment of the spindle height is possible in the Y-axis with position correction. Straightness has been improved in the Z-axis due to increased guide ratio. There is also now higher positioning accuracy (Tp = 0.006 mm) in the in the X-, Y-, and Z-axes (verified by ISO 230-2) available.

Products February 10, 2021

BA space3

With an installation of footprint of 25.3m2, the machine is the largest in SW's repertoire. It features a working rage of 3,000 x 1,800 x 875 mm on the X-, Y- and Z-axes respectively. On each of these axes, the HSK 63 spindle is able to reach a rapid traverse of 120 m/min, with a chip to chip time of 4-4.25s (depending on which optional features a customer selects). So not only is the machine capable of machining large structural components made of light metal material such as battery housings and car chassis bodies that are in such high demand in the industry – but it does so at speeds much faster than anything offered by the competition.

News February 9, 2021

The UP! Network wins mobile application award

The UP! Network has been awarded a MobileWebAward from the Web Marketing Association (WMA), winning the Best Manufacturing Mobile Application award in the "Best of Industry" category.

Keep scrolling

« Previous 1 … 311 312 313 314 315 … 1,433 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow