Resources

Hanover, Germany. The extraordinary, unpredictable situation caused by the coronavirus presents unprecedented challenges to companies worldwide. Industrial cleaning technology does not seem to play a role at first. But the solutions presented at the 18th parts2clean (27-29 October 2020) will support companies in the production and remanufacturing sectors to improve their future viability and thus emerge from the crisis stronger.

Products May 15, 2020

Die Cut FLEX-TRED Anti-Slip Tape

Applied FLEX-TRED is resistant to motor oil, detergent, hydraulic oil, and UV. It will tolerate steam and detergent cleaning and is essentially unaffected by climactic exposure and mild acid or alkali exposure under normal conditions. Die cut FLEX-TRED is ideal for application on gas/brake pedals, machinery deck plates, equipment steps and walkways, mowers, snow groomers, tow motors and forklifts, on platforms, scaffolds, cherry pickers, and ladders, and more.

Products May 15, 2020

Duratomic TM grades TM1501, TM2501 and TM3501

These three Duratomic grades feature innovations based on world-leading coating chemistry developments adapted to manufacturers' application needs. In addition to offering superior mechanical and thermal properties, this coating also provides the chrome-colored Used-Edge Detection technology, which makes every edge count and reduces potential waste.

Products May 15, 2020

MADISAN 75 Sanitizer

MADISAN 75 appears on EPA List N: Disinfectants for Use Against SARS-CoV-2. It is ideal for a range of industries and applications, including industrial/manufacturing facilities, transportation, schools, restaurants, as well as hospitals and healthcare facilities, nursing homes, food and beverage processing, and more.n

Products May 15, 2020

SHUR-KUT Coated Cartridge Rolls

Ceramic cartridge rolls feature self-sharpening grains which continually produce fresh cutting points which easily cut through stainless and alloys. Self-sharpening grains also reduce friction and prolong cut rates. Additional grinding aid further reduces heat for extended wear and reduced downtime. Multiple layers wear away to expose fresh abrasive material, further extending service life.

Products May 15, 2020

ALPHACAM Integration Software Upgrade

An array of new and enhanced functionality and seamless integration with other software packages ensures that the latest release of ALPHACAM stays at the forefront of helping manufacturers create smart factories in line with Industry 4.0. Updates to the Automation Manager in ALPHACAM 2021 assist users in preparing jobs for processing, as well as with management.

Products May 14, 2020

HS flex Heavy

The HS flex heavy handling system is designed to be adaptable to five-axis PERFORMANCE-LINE machining centers (C 400 and C 650) as well as the HIGH-PERFORMANCE-LINE models (C 32 and C 42). This also marks the first time that the C 650 is available with automation capabilities. n

Xtra·tec XT M5130 Shoulder Milling Cutter

Products May 14, 2020

Current1 Older

Xtra·tec XT M5130 Shoulder Milling Cutter

The mill is best suited to machining steel, stainless steel, cast iron, non-ferrous material and materials with difficult cutting properties. This wide range of uses results in lower tooling and administrative costs, as does the fact that its 90° approach angle dramatically decreases the need for finishing operations. Walter Tiger·tec cutting tool materials, the high number of teeth, and small indexable inserts also makes it ideal for workpieces with small machining allowances.n

Products May 14, 2020

Lift and Turn Compression Latch EN 5630

The standard parts specialist JW Winco introduces the new Lift and Turn Compression Latch for holding doors, covers and hatches closed. It is operated in two steps with an ergonomic, powder-coated T-handle in black or gray. When folding the T-handle in or out, a stroke of 5 mm is initiated on the rotating latch to generate the required pressure against a door seal. In the folded-out position, the T-handle can be turned to the left or right side, moving the rotating latch 90° behind the cover or door, allowing it to be opened. The rotating latch can be flexibly adjusted for frames between 13 and 75 mm thick, depending on the application. The two-stage movement secures the closure against vibration.

Products May 14, 2020

FTMg Multifunctional Sensor

With the measurement of compressed and non-corrosive gases, it reliably displays three parameters at once by measuring the flow, pressure, and temperature. In doing so, it saves the customer money through improved energy management with the reliable detection of leaks. This new flow sensor is also very lightweight and compact, making it ideal for installation in tight spaces.n

Products May 14, 2020

ABS and ASA Advanced Materials

Both versatile and impact-resistant, BigRep's new ABS (Acrylonitrile Butadiene Styrene) is perfectly suited for mobility applications and a variety of end-use consumer appliances. Weather- and UV-resistant, BigRep's new ASA (Acrylonitrile Styrene Acrylate) material is a robust, engineering-grade filament with high mechanical resistance, low shrinkage and superior layer adhesion, while also showing a greater heat resistance than even ABS.

Products May 13, 2020

NCSIMUL Digital Twin Software Update

NCSIMUL virtually builds the real-life machining environment to avoid errors, decrease set-up times and switch CNC programs between machines. nnThe 2021 release features a new comparison mode that detects excessive material during a fast and hidden simulation. It shows a solid comparison between the CAD/CAM models or previous cut stock and the NCSIMUL simulated model. n

Keep scrolling

« Previous 1 … 365 366 367 368 369 … 1,433 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow