Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
GripShape Application
Fairlane Products announces the launch of the web-based GripShape application that allows users to design and purchase custom robot gripper fingers, available online at www.gripshape.com. GripShape offers design services, a design configurator, and manufacturing services for tooling robot grippers. The interface is easy to use and requires no CAD experience to customize a one-of-a-kind design in minutes.
40 P Plasma Cutter
The Forney 40 P Plasma Cutter is the ideal choice for heavy-duty cutting. This machine is capable of dual-voltage, allowing users to work wherever 120V and 230V power is available. The 20' torch included with this unit allows great reach and a large working envelope for maximum convenience and comfort.
Solar Atmospheres commissions scanning electron microscope
To meet the challenges of the metal treating industry, Solar Atmospheres purchased and commissioned a Hitachi smart Scanning Electron Microscope. The FlexSEM1000 II will allow Solar to meet customer needs, such as strict requirements for low level contamination from carbon, oxygen and/or nitrogen post heat treating.
Process knowledge key to achieving desired production rates and yields
Industrial process success is most commonly defined by two parameters: production rate and yield. In the simplest terms, make as much as you can in the shortest amount of time. Understanding both the process requirements and production environment allows companies to optimize their production rates, resulting in lower cost per part and higher profit.
Tolomatic names Paul Carlson president and CEO
Paul Carlson has been named president and CEO of Tolomatic Inc., Minneapolis. Carlson has more than 30 years of manufacturing experience serving a broad spectrum of industrial, commercial, food and beverage markets globally.
parts2clean 2020: The international hub for component cleanliness
The transformational wave sweeping across numerous industrial sectors and markets is presenting companies with new and ever-shifting challenges, and this is also applies to industrial component and surface cleaning. This trend is fully reflected by parts2clean 2020, which takes place Oct. 27-29 in Stuttgart, Germany. For virtually every high-tech application in the fields of manufacturing and reprocessing, parts2clean is the information and procurement platform of choice for users of industrial cleaning technology.
Why use a CT scanner for an industrial job?
The ability to "see through" a solid object was once thought to be a tool of the future, or a power belonging to Superman–but the technology is here today, and more widespread and accessible than you may have though
Lincoln Electric names Gabriel Bruno chief financial officer
Lincoln Electric Holdings Inc. announced that Vincent K. Petrella, executive vice president, chief financial officer and treasurer, will be succeeded by current executive vice president, finance, Gabriel Bruno, effective April 22, 2020. Petrella will continue to serve as executive vice president to assist the executive team with the transition of the finance and corporate strategy organization until his retirement later this year.
SP ProTwist by Status Pro
Simplify the process of installing, moving and realigning CNC machine tools with SP ProTwist by Status Pro, offered exclusively in North America by CENTRIC International. This highly precise and easy to use system is an essential part of any quality management process, offering precision measurements down to 1 μm (0.2 arcsec).
JC899 Hybrid Stack Finisher and JC898 Rougher
For aerospace shops struggling with holemaking and milling operations in hybrid stacked materials, the new JC899 Hybrid Stack finisher and JC898 rougher from Seco Tools are ideal solutions. The finisher, JC899, features a patented two-in-one geometry that eliminates problems with delamination and fiber pulling out when working with stacked materials such as carbon fibre reinforced polymer (CFRP) combined with titanium or aluminum.
Tungaloy enhances steel turning performance with new T9200 grade series
Tungaloy's CVD grades in the T9200 series offer outstanding performance in steel turning. This new generation of grades features Tungaloy's innovative PremiumTec post surface treatment technology making T9200 hard to break.nn
Beckhoff Automation names Jacob Schieffer central regional sales manager
Jacob Schieffer has joined Beckhoff Automation LLC as central regional sales manager. Based at the subsidiary's headquarters in Savage, Minneapolis, Schieffer will oversee sales development of new and longstanding customers throughout the Midwest, covering all key automation markets and centers of innovation.
