Resources

Klϋber Lubrication introduces Klübersynth GE 14-151, a special grease for highly loaded small gears like those found in power tools. This product consists of a finely balanced combination of ester and synthetic hydrocarbon base oils with an aluminum complex soap thickener.

Product November 26, 2018

DMC-40×0 Motion Controller

The DMC-40x0 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as 40 microseconds-10 times the speed of prior generation controllers.

News November 21, 2018

Back in black

Since 2006, sales of vinyl records have been increasing steadily. No one is happier than Pheenix Alpha. Working from its original 20th century blueprints for a vinyl record press, the company is starting to manufacture an updated version of the press with 21st century bells and whistles.

News November 20, 2018

Manufacturing jobs are defying expectations

"Nation longs for one more day with dying manufacturing sector." That headline, published in 2014 by the satirical website The Onion, anticipated both President Donald Trump's fears and the retorts he gets from his critics. He campaigned on a promise to bring back jobs in manufacturing after decades of decline.

News November 20, 2018 Harry G. Sachsel

Benefits of variable spindle speed controls when grinding

Precision grinding results in the material removal of metals of all kinds and crystalline materials of all kinds, i.e. glass, quartz, ceramic, ferrite, abrasives, stone and other materials that cannot be machined with conventional cutting tools. These materials are too hard, abrasive, and require dimensions, tolerances and surface finishes otherwise not achieved easily or cost effectively with any other method.

News November 20, 2018 Thomson Mathew

How automation can help small manufacturers beat the giants

Sometimes manufacturing can feel like a battle between David and Goliath. But in the era of automation, think Industry 4.0, manufacturers are discovering the advantages to being smaller. Automation technology has leveled the playing field and now smaller means nimble, niche and, for the first time, heading in the same direction as the big guys.

Product November 20, 2018

WorkPLAN 2019 R1

"The problem of real-time localization was a major subject raised during discussions with our customers, and it became increasingly urgent to be able to localize and track parts in the workshop." Those are the words of Christophe Mas, brand manager of WorkPLAN Solutions, explaining the thinking behind the most important enhancement in the latest release of the software.

Product November 20, 2018

Current1 Older

Shaft Collars

JW Winco Inc. offers an extended range of Shaft Collars that include a variety of different configurations. The products include semi-split shaft collars GN 7062.1 with extension tapped holes, GN 7062.2 with flange holes, and GN 7062.3 with damping washer, along with two-piece shaft collars GN 7072.1 with extension tapped holes, GN 7072.2 with flange holes, and GN 7072.3 with damping washer.

Video November 19, 2018

Hard part turning with CB7105 and CB7115

Sandvik Coromant's new grades CB7105 and CB7115 break new ground in hard part turning. The new grades are based on the newest generation Cubic Boron Nitride (CBN) material. This material enhances crater wear resistance and fracture resistance at high cutting speeds in case hardened and induction hardened material.

News November 19, 2018 Kip Hanson

Learning feeds and speeds again

Continuous learning, continuous improvement, continuous generation of ideas—they're all important things. I would like to think they're especially important to manufacturers but am struggling to come up with a specific reason. Every business, from floral arrangers to drywallers, must continually adapt and evolve or face eventual corporate death.

Product November 19, 2018

Fixture Pro Vises for Multiple-Axis Machining

Jergens Inc. introduces a new range of vises for multiple-axis machining productivity. Available in 75mm and 130mm with a number of mounting options, the self-centering vises feature a low-profile design to allow for a greater part (machining) access.

News November 16, 2018 Kip Hanson

What’s DFAM?

Depending on whom you ask, you'll receive wildly different unravelings of the acronym DFAM. To music aficionados, DFAM might mean "drummer from another mother," clever branding from Moog Music Inc. to describe its newest line of percussion synthesizers. I wish I'd thought of that phrase.

Keep scrolling

« Previous 1 … 549 550 551 552 553 … 1,440 Next »

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Browse results

Explore

Address:

Follow