CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Browse 51 more topics
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
ALD Arm-Mounted Luminaire
The flexible ALD arm-mounted luminaire impresses with the latest LED technology, 3D head joint and perfectly balanced, adjustable arm. Also, ALD's wide area of illumination, on/off and continuous dimming touch panel, and glare-free illumination ensure maximum ergonomic working conditions for assembly area activities that can last extended periods of time.
MLD Magnifier Luminaire
Waldmann Lighting introduces MLD, a complementary new addition to its magnifier luminaire portfolio. For any application where attention to detail is paramount, MLD magnifier luminaire features glare- and distortion-free 3.5 diopter magnification with a large, wide 6.3-inch diameter lens.
SHD Skiving/Roller Burnishing System
Sunnen Products Co. has applied its bore sizing and finishing expertise to the high-production skiving and roller burnishing process. The result is the new SHD skiving/roller burnishing system that is 60 to 70 percent faster than traditional honing and engineered to deliver precise tolerances and quality surface finishes.
Electronic Control and PLC Integration to 6000 Series Lubrication Systems
AMCOL Corp. introduces electronic control and PLC (Programable Logic Controller) integration to its 6000 series precision lubrication systems for true minimum quantity lubrication (MQL). MQL incorporates extremely accurate spray equipment to place minute amounts of concentrated lubricants to the cutting tool/workpiece interface to maximize tool life and provide a near dry environment.
SH-6000 KROSSGRINDING Machines
Sunnen's SH-6000 KROSSGRINDING machines combine honing and ID grinding technology into a unique process that delivers higher precision roundness, straightness, bore size and finish than either process, and with tighter tolerances. The SH-6000 yields consistent and accurate bore size control tolerances to 0.00025mm (0.000010") by utilizing diamond-plated or metal-bonded abrasive tooling with multi-stroking technology for maximum productivity and performance.
MAXIEM 1530 Waterjet Cutting Machine
OMAX's MAXIEM 1530 waterjet with multiple-axis cutting capabilities can be paired with an A-Jet cutting head. A cutting range from 0° to 60° off vertical, the A-Jet can easily cut beveled edges, angled sides, and countersinks. Advanced features in the Intelli-MAX software suite allow the A-Jet to compensate for taper and easily create complex 3D shapes.
80X Series JetMachining Centers
OMAX offers the versatile 80X with Tilt-A-Jet taper-compensation technology. OMAX Corp.s 80X Series JetMachining Centers incorporate multiple table sizes and a customizable work envelope for precise abrasive waterjet cutting of large components and multiple-part projects.
RAPTOR Industrial-Grade Spot Light
Waldmann Lighting introduces its newest energy-efficient, industrial-grade spot light – RAPTOR. No more shutting down machines to change the light bulbs.
Here are 13 to do’s to manufacture like a boss
When you think of a doing something "like a boss," words like confident, swagger, authority, cool, finesse and amazing come to mind. Those words apply to manufacturers who are killin' it day in and day out.
Redesigned DT and DM Series Drill/Tap/Mill Centers
Haas Automation's popular DT and DM Series Drill/Tap/Mill Centers have been completely redesigned from the castings up to provide more performance and reliability than ever before, with better chip flow, more visibility into the machines, and easier access to parts and fixturing. And best of all, they're now less expensive.
UMC-1000SS 5-Axis Universal Machining Center
Haas Automation expands its line of affordable, 5-axis universal machining centers with the UMC-1000SS, a larger-travel, super-speed UMC that offers high performance and speed for 5-sided (3+2) machining and simultaneous 5-axis machining.
TRT160 Tilting Rotary Table
Five-axis machining is a powerful tool for reducing setup times and increasing accuracy on complex parts. But investing in a 5-axis machine tool may not be in the budget, especially for smaller shops.
