Resources

LMC Workholding offers the Energy series large-bore air chucks, featuring a built-in air cylinder and extra-large through-hole. The full spindle bore of the lathe can be utilized for through-hole work and long jaw travels provides more clearance for through feeding pipe.

Video September 29, 2017

[8] The CNC Chef: What is high-speed machining?

Understanding high-speed machining, or HSM as it's abbreviated, can be difficult for the simple reason it's defined in so many different ways, according to Bob Warfield of the CNCCookbook. As he explains in the eighth episode of The CNC Chef video series, some people define HSM as being all about high spindle speeds and the feedrates that go with them.

News September 29, 2017

Komet Group GmbH partners with MachiningCloud Inc.

Almost 30,000 metric tools from Komet Group GmbH, Besigheim, Germany, are now available through MachiningCloud Inc., Camarillo, Calif.

News September 29, 2017 Michael C. Anderson

‘New-collar’ jobs, millennial workers and Manufacturing Day

In manufacturing, the nature of the work as well as the nature of the workers are changing: What's a prospective employer to do? Some pre-Manufacturing Day discussion.

News September 28, 2017

Fact vs. fiction: the truth about balancing toolholder assemblies

If you're lucky, the veterans in your shop will take a rookie aside and pass on their hard-won knowledge of good machining practices. Most of this information is priceless. But some of it … not so much. For example, there are a lot of myths about balancing out there that, if not refuted, can cost your operation a lot of lost time and money.

News September 28, 2017

World Bank: Tech, trade changes disrupting manufacturing-led development

Advances in technology and changing trade patterns are affecting opportunities for export-led manufacturing. Smart automation, advanced robotics and 3-D printing are new factors influencing which locations are attractive for production. While these shifts threaten significant disruptions in future employment, particularly for low-skilled workers, they also offer opportunities, according to a new report released today by the World Bank Group.

News September 28, 2017

An overview of milling applications

Entering the workpiece is an essential part of optimizing tool life and reducing vibrations. The roll-in method allows you to softly and smoothly enter the workpiece. Inserts are eased into the cut following the golden rule of milling: a thick chip on entry and a thin chip on exit.

News September 28, 2017

IFR forecast: 1.7 million new robots by 2020

In 2017 robot supplies in the Americas will surge by 16 percent from 2016, according to the International Federation of Robotics. IFR estimates that by 2020 the worldwide stock of operational industrial robots will increase from about 1,828,000 units at the end of 2016 to 3,053,000 units—an average annual growth rate of 14 percent between 2018 and 2020.

News September 28, 2017

Report: Every third cyber-attacked computer is from the manufacturing sector

A new report from Kaspersky Lab found that in the first half of the year, the manufacturing industry was the most susceptible to cyberthreats – with the industrial control systems (ICS) computers of manufacturing companies accounting for almost one third of all attacks.

Product September 28, 2017

LC 280 α Gear Hobbing Machine

In recent years the gear market has been experiencing a trend towards outsourcing. As a result of this shift, many suppliers are receiving orders for the soft machining—wet or dry hobbing--of gears. "With the LC 280 α, Liebherr has developed a new generation of gear hobbing machines for such short-term requests", said Dr.-Ing.

Product September 28, 2017

Knife Edge Rollers Made from iglide H1 Plastic

Gentle and quick transportation of goods plays an important role in material handling and the packaging industry. Above all, the speeds of the plants are constantly increasing due to increased productivity. For this reason, igus has developed knife edge rollers made from the high-performance plastic iglide H1, created specifically for applications with higher transport speeds.

Product September 28, 2017

HOMMEL-ETAMIC Wavemove

The Jenoptik Industrial Metrology division offers a fully automated measuring station, which can be operated directly by staff on the production line. The HOMMEL-ETAMIC wavemove combines high-precision roughness and contour measurement technology with innovative CNC technology and eight fully automatic CNC axes to measure both roughness and contours in a single measuring run, recording as many data points as necessary.

Keep scrolling

« Previous 1 … 708 709 710 711 712 … 1,440 Next »

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Browse results

Explore

Address:

Follow