CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Browse 51 more topics
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
MechaLogix Cosen Predictive Computing
Cosen Saws USA, Charlotte, N.C., has introduced MechaLogix Cosen Predictive Computing, a cloud-based system that reportedly revolutionizes the category with an innovative feature that monitors the performance of a blade and can accurately forecast the number of remaining cutting hours left before a saw blade dulls and is no longer cutting with precision or a complete breakage.
GMN USA moving to new facility
GMN USA today announced the company will be moving to a new state-of-the-art facility on Feb. 1. The new facility will allow for the expansion of assembly and manufacturing areas to better meet customer needs, the company reported in a brief email-based news release.
Industry-led initiative rebuts report questioning reshoring
Harry Moser, the founder and president of the Reshoring Initiative, an industry-led group out to prove offshoring is not always the best economical decision for companies, takes issue with the recently released 2015 A.T. Kearney U.S. Reshoring Index, which suggested that the reshoring trend was an aberration. A.T.
Solar Atmospheres names new operations exec
Solar Atmospheres of California, Fontana, Calif., recently named Mike Moffit as its new vice president of operations, the company announced in a Jan. 20 news release. Moffit has been with the company for 21 years in a variety of departments, and served as the quality manager for the past 5 years at Solar Atmospheres of California.
Jet Edge appoints new service manager
Waterjet systems manufacturer Jet Edge Inc. recently promoted Josh Bauer to service manager, the St. Michael, Minn., company announced in a Jan. 13 news release. The promotion puts Bauer in charge of managing all aspects of Jet Edge's waterjet service department, which supports customers worldwide.
Okuma expands application engineering team
Okuma America Corp., a CNC machine tool manufacturer based in Charlotte, N.C., this month added three new members to its applications engineering team: Brad Fitzpatrick, Jeff Hampton and Lee Johnston, according to a company news release issued Jan. 13.
Seco adds to executive, management teams
Citing an outlook for continued business growth, Seco Tools LLC this month appointed new members to its executive and management teams, according to a Jan. 12 news release from the Troy, Mich., company. David Mrdjenovic is the company's new director of operations, and Scott Hecht now serves as market channels and business development manager.
PI USA bolsters technical sales team
In a move to enhance its technical sales team, PI (Physik Instrumente) L.P., an Auburn, Mass.-based manufacturer of precision motion control and positioning components and systems, this month named Jess Sargent as its Western region field sales engineer for OEM customers.
Precision Machined Products Association names new exec
Precision Machined Products Association (PMPA) this month named Bernie Nagle as its new executive director. "I'm honored and very excited to assume the role of executive director for PMPA," said Nagle, who will provide purpose, focus and constructive guidance to the association in his new role.
Dorner names new sales manager
Lincoln Frazier has been appointed Southeast regional sales manager for Dorner Mfg. Corp., Hartland, Wis. In his new position, Frazier will work with sales channel partners and key accounts to grow the company's industrial and sanitary conveyor business throughout the Southeastern United States, according to a Jan. 4 news release from the company.
Okuma names Caron Engineering its Partner of the Year
Okuma America Corp., Charlotte, N.C., recently named Caron Engineering its Partner of the Year, according to an Okuma news release issued Jan. 6. Based on Okuma's annual distributor survey, Caron Engineering received the highest overall partner rating from among all 50 members of Okuma's Partners in THINC, which is a collaboration network of more than 40 industry leaders who come together to solve problems and explore new productivity ideas for real-world manufacturers.
Addition of 5-axis training program draws national attention
A partnership between GF Machining Solutions, Lincolnshire, Ill., and a Colorado community college that brought 5-axis training to the school's machine technologies program recently earned recognition from the Obama administration for its efforts to confront an estimated 2 million manufacturing jobs expected to go unfilled over the next decade, according to a GF Machining Solutions news release issed Jan.
