Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
NSK America names two territory managers
NSK America, a producer of high-speed precision machine tool spindles and hand tools, has named two new territory managers.
SSD with powersafe
The secret to the high performance of the "powersafe" feature is the combination of sophisticated firmware and hardware features. Highly reliable tantalum capacitors that store energy while the SSD is in operation form the basis. In the event of a sudden power outage, the stored charge is used to safely write both dynamic data and data in the DRAM cache to the NAND flash array. Intelligent power management within the firmware ensures that the power supply disconnects from the host upon reaching a critical threshold and connects to the regulated voltage of the capacitors instead. This provides the SSD with sufficient power to safely execute write commands and flush cached data.
6-Axis Robotic Stage
PI's hexapod 6-axis motion controllers and hexapod software are based on decades of experience with parallel kinematic motion systems. They are easy to program, allow the user to change the center of rotation with one command, and come with high level alignment functions built in. PI's hexapod motion simulator software calculates the limits of workspace and load capacity, thereby ensuring the hexapod you choose will handle the loads, forces, and torques in your application.
ANCA showcases technology at GrindingHub
ANCA will showcase its technology range at the GrindingHub trade show in Stuttgart, enabling customers to grow capacity, improve profits and gain efficiencies.
Sandvik Coromant Canada names cluster manager
Magalie Jackson has been named Cluster Manager of Sandvik Coromant Canada.
Artec Micro Scanner
Artec Micro's advanced twin color cameras and blue LED lights are synchronized with the scanner's dual-axis rotation system to create a digital copy of your object with a minimum of frames captured. In addition, the Smart Scanning mode captures every surface of the object in the least amount of time, using an ideal number of frames.
503-MLBR and 533-LBR Manual Clamps
The user-friendly new models allow for fast handling and enable their users to build up applications more efficiently with little interference contour. The 503-MLBR and 533-LBR clamps are fully interchangeable with models having the same specifications, other models are available upon request.
AM110 Tungsten Carbide Rod Blanks
Hyperion's materials experts specially engineered grade AM110 to optimize the hardness, toughness and galling resistance required for machining superalloys in today's demanding industrial applications. Some of the targeted markets include aerospace, medical and energy, where quality and productivity are critical to manufacturing precision components.
CX-8/0 Rectangular Power Connectors
The rectangular power connectors series (CX-8/0) feature safe crimp termination. Compared to other rectangular inserts using the axial screw termination, the CX-8/0 series with crimp technology is more resistant to mechanical stresses such as vibration, shock, and strain on wire strands. When mated, the connection is sealed and gas-tight, thereby preventing corrosion on the metal contacts and performing consistent and efficient connectivity with lower voltage drop. Also, the crimp termination helps to reduce wire termination time and therefore shortens the overall connection time.
Peak Toolworks opens location number 13
Peak Toolworks held a ribbon-cutting ceremony to open its location in Elkhart, Ind.
PlantMonitor
By connecting multiple StateMonitors within the new PlantMonitor software umbrella, a company's entire production environment will become transparent to users, enabling them to react appropriately to problems and changes. This also contributes to enabling users to achieve long-term process optimization.
5 important issues affecting manufacturing in 2022
INFORM, the optimization specialist based in Aachen, Germany, explains what lies ahead for the industry this year and how it can become more resilient and sustainable with digital solutions.
